Bicycle Helmets for the 2013 Season
Summary: Our review finds no radical safety improvement this year that would compel you to replace your current
helmet. Almost all of the helmets described below meet standards and offer good if not excellent protection. We have
tested a sample of cheap and expensive helmets and found no real performance differences by price. We recommend looking
for a helmet that fits you well and has a rounded, smooth exterior with no major snag points.
Trends this year
There are new models in 2013 that are worth a look if you need a new helmet. The trend continues toward the compact, rounder, smoother profile
that we think is best when you crash. But there is still no major
advance in impact performance, ventilation or wearability this year that would compel you to replace your current
Almost all of the helmets listed below meet national or international standards and offer good protection, although some
standards are tougher than others. For the US market the CPSC standard is required by law for any bicycle helmet. Without
comparative test data we usually do not know if a particular model exceeds the requirements of the standard and offers
superior protection. Most of them probably do not, except those that provide additional coverage. There are unpublished
indications that the lightest and thinnest helmets do not perform well when impact levels exceed those required by the
Highlights for 2013
- Neon is back. After the bright neon color craze of the 90's died, dealers could not sell neon anything, including
helmets. But this year neon is back, although never called neon.
- Rounder profile "city," "urban" or "commuter" models are still growing in number, but not as fast as prior years.
Almost every manufacturer already has at least one in their lineup. The list below has more than 65 models. We are
pleased that most of the newer models are the much improved "compact" style, even if they still have points in the
- The higher priced helmets have big vents, but no verifiable advantage in impact performance. Our testing showed that the sample of very expensive helmets and very cheap helmets we tested had
about the same impact protection.
- A slip-plane helmet appeared in 2010 with a second shell or liner that can slide over the inner shell a few
millimeters at the moment of impact. This may mitigate the rotational force on the head, and in some cases that has
been measured. The hope is to reduce rotational injury. Search for "MIPS," the proprietary technology.
- There are two "Conehead" designs for the impact foam in helmet liners this year,
introduced by Cannondale in their 2012 Teramo model and Kali in their 2013 Maraka. It has two layers of
standard EPS foam. One is lower density, and should crush more easily at lower impact levels, possibly offering an
advantage in avoiding concussions. Abus has shown a model with a cardboard liner section, backed by standard EPS. In
football, hockey and lacrosse there are new helmets using collapsible plastic modules in place of foam. None of those
has yet made it to the bicycle helmet market.
Ring fit systems, the "one size fits all" solution, have taken over for most of the market.
They work well for some, but not at all for others, who find that they have to tighten the ring uncomfortably to get
a stable fit. You have to try them on to be sure. There are still models using fitting pads instead, but you may have
to look for them, and you may pay more.
- Expensive materials: Carbon fiber allows slightly lighter construction, but saves minimal weight except in the
heaviest full face BMX helmets. Manufacturers are searching for ways to use titanium, another glamorous and expensive
product that saves very little weight in a helmet. Kevlar is still in a few helmets, mostly in the internal
- Electric bike helmets: designs for e-bikes are beginning to appear, typified by the Casco
- Several manufacturers have brought out fit systems with fixed side straps to compete with Bell's True Fit system. But they do not have the extra internal strap anchor cage that makes the True Fit
system work, and we found that they do not work for us as well as the True Fit system. That includes Bell's own bike
shop line of helmets and the Giro version.
- Strap adjustment fittings--buckles and side pieces--still badly need improvement. Most of them slip too easily,
resulting in the "strap creep" that can loosen straps even on riders who have adjusted
their straps carefully.
- Rubber finishes and a fabric finish are found in a few helmets. We do not recommend them for road use because
rubber or fabric surfaces might increase the sliding resistance of a helmet when it hits the pavement. If you doubt
that, scrub one on pavement and see the difference for yourself.
- Anti-microbial pad materials are increasingly used in high-end models. Most use silver or other chemicals, and
might be useful if you are having unusual helmet odor problems. If you are seeking to reduce your exposure to
industrial chemicals and metals they may not be something you want to have held against your sweating head on every
Some Interesting New Models
Abus Kranium Ecolution: has a unique liner that combines one layer of conventional EPS expanded polystyrene
and one layer of collapsible cardboard honeycomb. We have a page up on the Kranium
technology with more photos of this helmet. So far, only Abus has shown a commercial prototype, and that one has
an inner liner of normal EPS foam.
- Bell Piston: road model and the value helmet in the bike store line, retailing for $40. It has reasonable
vents and a well-rounded compact shape, much improved over Bell's former value helmet design.
- Bell Full 9: a high-end downhill mountain bike racing helmet with chinbar certified to CPSC, ASTM F1952
downhill and ASTM F2032 BMX standards, verifying the performance of the additional coverage. Has a breakaway camera
mount. Compatible with the Eject removal system that alerts EMT's to features that facilitate helmet removal. Retail is
$400. Competes with the 2012 Specialized Dissident.
- Carrera "Accordion": a folding helmet made of strips joined by an elastic frame that opens to provide vents
between the strips and folds into a solid piece to reduce the width for storage. Designed only to the European EN 1078
standard, so not available in the US.
- Catlike Whisper Plus: Not new, but now available in a CPSC version for the US market. Has a unique nubby
outer shape and 39 small oval vents giving an almost Swiss cheese appearance. For 2013 the pads have been updated to
accommodate four head shapes, including Asian heads. Retail is $225 in the US for the CPSC-certified version.
- Giro Air Attack: an aero helmet that is almost as round and smooth as the Casco Warp. The Air Attack Shield
has an eye shield that extends the roundness down on the face. It is a thin-shell model, with modest vents that Giro
thinks might make it tolerable for road use. We will find out when it is available in the spring.
- Kali Maraka: Kali's first bike helmet with the conehead dual-density liner. It is a compact model with
blocky lines and some unfortunate rear points. Carbon and polycarbonate shell, pad fit, "breakaway" visor. Retail is
- Kask TT-Bambino: new for 2013, a round chrono helmet with just a hint of oval in the shape. Inmolded with a
thin shell. There is a face shield that completes the round profile. Meets the CPSC standard for sale in the US. Retail
- Lazer CityZen: a round, smooth skate-style helmet with vents, but covered with a cloth cover in houndstooth,
tartan or solid grey or black. It is reminiscent of the Danish Yakkay. We would avoid the flaps, visors and cloth
cover, but it also comes as a hard shell called the Next.
- Limar Velov: a unique road helmet with big vents and a compact shape that has ridges on the top. When four
large solid panels are placed between those ridges, it is transformed into a round, smooth aerodynamic helmet with no
ventilation. It is being marketed in Europe as an urban helmet at 80 euros.
- MET 20 Miles: a well-rounded urban helmet with just a hint of rear lines, large vents, good strap junctions
and an LED flasher in the rear. Visible neon yellow available. Retail is 55 euros. The CPSC version for the US is
promised for spring.
- POC Tempor: a unique chrono model that flares out on the lower sides and has a long tail that fits snugly to
the neck and rises to curve over the shoulders. It treats the cyclist as one body mass rather than a separate head and
body. Comes in neon orange, black and white. Retail is $380.
- TSG Kraken+: a segmented skate-style helmet with a MIPS slip-plane system. Two layers with a slippery
surface between them slip a little on impact, possibly reducing rotational forces. TSG says the segmented liner allows
the helmet to conform somewhat to head shapes.
- Urge Activist: a classic hard shell skate style helmet made with recycled EPS and an unpainted, dyed ABS
shell. Urge says this model goes furthest in environmentally appropriate materials. The packaging is plain brown
cardboard, and when legally possible they avoid the plastic bags and tags that end up in the trash.
Extended coverage models
Several companies are now producing chunky "mountain style" helmets with
enhanced rear coverage. The first we saw four years ago was a Toby Henderson design, his THE F-14
. He followed
that up with his 2011 THE F-20
(on the left below), marred only by a useless rear spoiler.
Others now have similar models, including the Acclaim Recon XC, Azonic Exile, Giant Realm, Fox Flux (with another useless
spoiler), POC Trabec, Pro-Tec Cyphon and SixSixOne Recon. All are worth a look if you want a helmet with more rear
coverage like a skate helmet, but big vents for bicycling. In addition to the extended coverage there is a fit advantage,
since helmets with lower rear coverage are less likely to ride up in front to expose your forehead, and are generally
easier to fit well. They may be the answer if your helmet seems to perch way up on top of your head.
Note, however that not
every helmet in this style actually has additional rear coverage. When you put on some of them and position them
correctly on your head the "additional coverage" disappears as the front edge comes down to your brow line.
Rounder, Smoother Helmets
We recommend smooth helmets that do not have points to snag when you
crash. The selection of well-rounded models is extensive for 2013, including:
- Most "skate-style" and BMX helmets
- Most toddler helmets
- Abus Urban-I, Lane-U, Urbanaut, Cyclonaut, Kranium Ecolution
- Acclaim Metro
- Azonic Exile
- Bell Muni, Sequence, Piston, Variant, Deuce/Impulse/Vogue/Cruiser discount model
- Bern All models
- Biologic Pango folder
- Bontrager/Trek Lithos
- Briko City Bike, Mustang
- Capix Hellion
- Casco Warp, ATC/Ciao, Attack, Cuda, E-Motion, Activ-TC
- Catlike Urban Concept
- Cratoni Evolution
- Ekoi City E+
- Eleven81 Crosstown
- Giro Air Attack, Hex, Phase, Reverb, Feature
- GPR/Plim Urbanus, Vidi
- J&B Furius V-23
- Kali Amara, Chakra
- Kask Sky Replica, Urban (Euro models), Lifestyle
- KED Sky (Euro Model)
- Kong Scarab
- Lazer Urbanize, CityZen
- Limar Velov (with cover panels)
- MET 20 Miles
- Netti Transit
- Nutcase All models
- O2 Dexter
- Oktos (several)
- POC Trabec, Receptor
- Potenza Pave
- Pro-Tec Cyphon
- Roar KS-04
- Schwinn Intercept
- SixSixOne Recon
- Specialized Street Smart
- Star (Zuhai Star) B3-11
- THE F20 (Extra coverage)
- THH T-35, T-36, T-38
- TSG Substance 2.0
- Uvex City 3, Urban
- Yakkay All models, but note cloth surfaces.
Consumer Reports Picks
We recommend checking Consumer Reports
for brand and model recommendations.
Their most recent helmet article for adults
appeared in the July, 2012 edition of their print
magazine, and rated 13 models. Only two rated above average in impact protection: the Bontrager Solstice Youth from Trek
and the Specialized Echelon. In addition to those two, CU checkrated the Bontrager Circuit, Louis Garneau Baristo and
Bell Array. Two of the tested helmets were rated Poor for impact: Nutcase Streetsport 8 Ball and Bern Brighton. The full
report including ventilation ratings and more is available to subscribers or through your local library.
Many manufacturers have quality inmolded
helmets priced in the
$30 to $40 range. That includes the Bell Piston, Bell Impulse/Deuce ($25 at discounters), Casco Ventec, Cratoni Xenon,
Eleven81 Open Road, Giant Talos, Giro Transfer, J&B Commuter, Kali Chakra, Lazer X3M and Tempo, Louis Garneau Olympus and
Arcterus (XXL), Scott Watu, Specialized Align, Uvex Viva, and the Vigor NOX and Fast Traxx.
There are many, many more very decent inexpensive helmets on the market that are not inmolded. We can't list them all. In
the US we are fortunate to have a mandatory national standard for bike helmets ensuring at least the minimum impact
performance level, whatever the price. Our sampling with lab tests
showed that cheap and
expensive helmet performance was very similar.
Bell's True Fit models
produce a good fit with minimal fiddling in some very competitively
priced helmets found in discount stores.
Extra Large Helmets
See our page on helmets for very large heads
Extra Small Helmets - XXS size
The smallest helmets advertised are for 44 cm (17.3 inch) heads. We have a page
with brands, explaining why tiny helmets
may not be a good idea.
Helmets for Rounder Heads
If your head is the rounder shape mostly associated with Asian
parentage, a few manufacturers in the US market have models they have identified as providing a good fit for rounder
heads. Most are using a different pad set in an otherwise standard helmet. We have more details on our page on fitting rounder heads
Helmets for Narrow Heads
At least two manufacturers have identified for us their models for longer,
narrower heads: Cratoni
. In addition, riders have said that the
Lazer Genesis/Helium fit their longer head better. (The Genesis was also praised by one with a rounder Asian head.)
has a helmet called the Kraken with a segmented liner that they say can adapt to narrow heads.
With most other helmets you can usually fit narrow heads with thick side pads.
Downhill Mountain Bike Racing Helmets
More manufacturers now have helmets certified to the ASTM
F1952 Downhill Mountain Bike Racing Helmet standard, including Bell, Giro, Kali, Pro-Tec, Scott, Specialized and Troy
Lee. Coverage and impact requirements are tougher than the CPSC bicycle helmet standard. Note that these still fall short
of the impact protection offered by the motorcycle helmets used by some downhill racers.
Hard Shell Bike Helmets
Some riders still prefer a hard shell bike helmet for road or trail
riding. The only real bicycle helmet design from a major US manufacturer is the Pro-Tec Cyphon
has at least one model as well, and the Spiuk Rasgo
comes close. If you
can make do with small vents there are many skate style helmets with hard ABS shells that have stickers inside saying
they meet the CPSC bike helmet standard.
Folding helmets first appeared in 1997 with the Motorika Snapit
, and there are a few designs coming to market in 2013. You can see the
below. (A very similar design was the Stash
, but that one has
will be introducing a new model in 2013 that folds like an accordion. There
is also the French Overade
, with a complex folding mechanism, promised for 2013. And the Closca
, a folder that collapses from the top into a ring for carrying, is also promised for late 2013, and
has now been certified to CPSC. It would be the only folder currently available for the US market, where most have
trouble meeting the CPSC impact standard. We have a page up on folding helmets
Chrono or Time Trial Helmets
Chrono models are the long-tailed or super-round time trial helmets
designed only for pursuit racing and time trials. Most are unvented, and they do not make sense for normal road riding.
You will know you need one when your coach says so. See our page on chrono models
detailed writeups on them.
Most women-specific designs differ only in colors and graphics from the
"male" helmet model they are based on, but some of them are lovely helmets. Ponytail ports are generally limited to small
spaces above the rear stabilizer. Many helmets will take a good three-to-four fingers of ponytail if you are willing to
thread it through every time you put your helmet on and take it off. A few of the others who claim "ponytail
compatibility" are noted below. Many riders find it better to wear their ponytails lower down on the head while riding or
tuck the hair up under the helmet to keep it off their neck in summer. Manufacturers of cap-covered helmets, including
, and Casqu' en Ville
, normally have female designs among their
Giro's 2013 catalog has an unusually frank statement on the subject: "What about fit for women? - While it is obvious
that anatomical differences between men and women can dictate different patterning and fit for many items worn on the
body, the head and skull are somewhat unique. When measuring men and women's heads, there is no significant difference in
the skull shape, location of skull features or the scale of the ears, eyes and nose between men and women." Written, of
course, by a person with no pony tail.
--is unique among the manufacturers in this writeup for making different
helmets for women. Their women's models are not just pastel color and graphics changes, but different helmets made with
different molds. Sizes are smaller, but there is more room for hair.
The "skateboard" helmets now on the market in big retail stores are almost all
bicycle helmets in the classic skate style
that Pro-Tec made popular decades ago. They
have small vents, but are protective enough for bike riding if the sticker inside certifies that they meet the CPSC bike
helmet standard. Most have better rear coverage than bike helmets do, and are more stable on the head because of
If you need a multi-impact helmet for aggressive, trick, extreme skating or skateboarding with frequent crashes, look for
a true multi-impact skate model meeting the ASTM F1492 skateboard helmet standard. We have a page
listing helmets certified to both standards
. Dual certification to bike and skateboard standards is the biggest
advance in skateboard helmets in recent years, denoting superior protection.
Made in USA Helmets
Some consumers ask us where to find a helmet made in the US, or in another country.
We have a page up on where helmets are made
If you are outside the US
In most markets you will find helmets that meet your national standard, or
the European CEN standard, and at least some that meet the US CPSC standard. The European bicycle helmet standard can be
met with thinner foam and a less protective helmet than the helmet required to meet the US CPSC standard. (We have
a comparison page up
.) Some European helmets may exceed the CEN standard by a wide margin and
pass CPSC, but unless identified with a CPSC sticker inside you will not know that. Major US brands often produce less
protective models for the European market to make them a little bit thinner, lighter and better ventilated so they can be
competitive there. For that reason you can not just judge by the brand or even the external appearance of the helmet. The
Australian standard is comparable to CPSC, so US manufacturers market the same models there. Canada has its own standard,
but it is similar to the CPSC standard and most models sold there are US models.
We have no ventilation test results on any of the helmets listed below, and
there is no generally recognized ventilation testing method or standard. So our comments on ventilation are just an
indication. We try to report findings by others on cooling, even though we have no confidence in most of them. A study
done years ago indicated that ventilation is basically determined by the size of the front vents. But in wind tunnel
testing the angle of the head shows up as critical, with huge performance differences when the angle moves as little as
two degrees. We don't recommend that you make any purchasing decisions based on our comments on ventilation.
Although we don't calculate averages, manufacturers' suggested retail prices seem to be a
little higher than last year. Some are adjusted up or down every year. Whatever the MSRP is, competition forces many
street prices lower, particularly on high end models. The lowest prices in discount stores in the US market have
increased now to about $18, and are mostly in the $20 to $35 range. In bike stores where you can get help with selection
and fitting you would expect to pay more, and the prices generally start about $30 and go up as high as you want. For
many buyers the fitting service is well worth the extra you pay in a bike store. For an idea of what the lowest prices
would be without any fitting help you can check Ebay or the Internet retailers, but be sure to include the shipping
charges to compare. Prices in markets outside the US are generally higher at current exchange rates, particularly in
What We Did Not Find Again This Year
There is still no reasonably vented bicycle helmet on the
market identified as an "anti-concussion" or softest-landing helmet. The concussion issue, so much in the news since
2010, is not simple. A softer landing will always help, but there are other factors in a crash, some that a helmet design
can't even address. Many point to rotational force as a prime concussion mechanism, but that does not mean simply jerking
the head to one side, since rotational forces in the brain can result from a simple straight-on impact. The manufacturers
with slip-plane technology that they say addresses the concussion issue have only skate style models, with very small
vents, or child models. We think that if you choose a helmet with a round, smooth shape it will shift on your head when
you hit anyway, so we question the value of the slip-plane design. A skate-style helmet with more coverage may be coupled
more closely with the head, though, and for those the slip-plane could make a difference.
There are no helmets promoted for the needs of seniors, who need softer landings in an impact. Current helmets are
optimized for best protection from catastrophic injury, but since lesser blows are survivable and no helmet can do it
all, the design priority remains protection against the hardest impacts.
No manufacturer advertises that their helmet protects against blows that exceed the CPSC standard by a wide margin,
although Consumer Reports ratings
based on their lab testing have indicated that some can.
With our legal system we may never see that kind of advertising.
Electronics have still not been applied to make bicycle helmets safer. We have yet to see on our market a mainstream
helmet with a rear-facing camera and a heads-up display to replace your old mirror. The introduction of the Video Head
model with a built-in video camera in 2013 indicated that may be getting closer. There are
many helmets now with LED flashers in the rear, but most of them are too small and have low output.
Here is an index to our reports for past years.
If no other information is in the writeup for each brand or model, these features are assumed:
The typical bicycle helmet listed below has a thick Expanded Polystyrene (EPS) foam liner with a thin plastic
shell. Increasingly, the foam liner is inmolded, meaning that the shell is placed in the mold and the foam material
of the liner is expanded into it, forming one solid piece. For lower-priced models the shell is generally molded
separately and then taped or glued on the foam liner. The typical helmet has at least some vents, webbing straps made
of nylon, polypro or a similar material, a plastic buckle, no reflective trim and either a ring fit ("one size fits
all") or soft foam fitting pads inside. It may have a visor. We have a page up on visors
explaining our lack of enthusiasm for them.
BMX models are "full face" (with chinbar) and have thicker hard shells shaped like a motorcycle helmet. The
chinbars typically do not have effective energy management padding. Vents are usually minimal, and there is normally
a very large visor bolted firmly on, a possible snagging hazard. Only one manufacturer has been able to tell us what force causes their
visors and other mounts to detach in testing. Some BMX models meet more demanding motorcycle helmet standards for
- Downhill racing models are similar to BMX but generally lighter and have vents. Usually they also have
minimal or no impact padding in the chinbar. Unless noted they are certified only to the CPSC bicycle helmet standard
rather than the tougher ASTM F1952 standard for downhill bicycle racing helmets.
Chrono helmets are teardrop-shaped for time trials and pursuit events. They often have extremely elongated
aero shapes and minimal vents, so they are not suitable for street riding. We have a page up on
Skate style helmets are the classic round, smooth shape pioneered by Pro-Tec in the 1970's with ABS plastic
hard shells and small vents. Most now have EPS liners and are certified to the CPSC one-hit bicycle helmet standard
rather than the ASTM F1492 Skateboard standard that requires multiple impact protection. Some are dual certified to both standards.
We have a page on helmet types
with longer descriptions.
Many helmets have a rear stabilizer wrapping around the back of the head, but we note those only if they have some
unusual feature. Stabilizers add some stability and comfort but are not part of the retention system and are not tested
for strength in labs certifying helmets to standards. They can not substitute for careful strap adjustment, although you
may think you have adjusted the helmet correctly because it seems more stable. With a hard blow the helmet can still be
knocked out of position or even fly off if the straps are not adjusted correctly.
We note the largest and smallest sizes available where relevant, and any bright colors. Prices are the Manufacturer's
Suggested Retail Price, the price you might pay at your local bike shop with fitting services included. Discount store
and Internet pricing is usually lower but no fitting help is included. There are often deals on closeouts of prior year
models. If you are looking for a particular model and don't find it here, use a search engine to find it.
We have a page of definitions
for most of the terms used below in addition to the page explaining
You can find additional info on each of the helmets below at the manufacturer's site. Many of them are also demonstrated
on YouTube videos.
Brands and Models
Abus is a German company also known in the US as a manufacturer of locks.
They have a unique ratcheting strap fastener with a toothed tab sliding into a slot that we have only seen on Abus and
Uvex helmets. It would have to be adjusted carefully to be sure it does not bear against the line of the jaw, but it
provides strap adjustment every time you fasten it and would be easy to tighten with one hand when your strap loosens
from sweat on a ride. (Few riders would think to do that.) Their rear stabilizers are adjusted by a ratchet device.
Visors mount with breakaway pins. Some models have bug net in the front vents. The company's philosophy on vents and
safety is summed up: "The more air openings a helmet has, the harder the absorbing material must be to compensate the
weight saved. However, the protection level suffers thereby. The challenge is to find the best solution for a fresh head
and good shock absorption." We agree with that. We don't have an Abus price sheet, so prices below are from websites.
Abus gives a separate name to the visor version of its models, and we don't always figure that out. Abus bicycle helmets
- In-Vizz: New for 2014 delivery, this road helmet has an unfortunate upswept tab in the rear and huge vents.
It has an integrated polycarbonate eye shield that pulls down to protect the eyes or slides up into the helmet if not
needed. Comes in a visible white option or in black with neon stripes. There is a neon yellow rain cover available.
This one will probably not be sold in the US. We don't know the retail pricing.
- Cyclonaut: New for 2013, a cloth-covered skate-style helmet for urban use. We don't like cloth covers
substituting for plastic that slides well in impacts. No vents. Abus is positioning this one as stylish urban wear. We
don't know the retail pricing.
Performance: New for 2013, this helmet has a unique liner that combines one layer of conventional EPS expanded
polystyrene and one layer of cardboard honeycomb. We have a page up on the Kranium
technology with more photos of this helmet. Retail in the UK is 80 pounds. The cardboard layer of the liner can be made from
recycled materials and would be considered sustainable, but the EPS layer is no better than other helmets in this
review. Retail pricing is not yet available.
- Urbanaut: Introduced in 2012, a nicely rounded commuter-style helmet with many innovations. The foam liner
is dual-density, and the shell uses both ABS and polycarbonate. The liner is inmolded. The two long narrow vents can be
closed with a winter kit when used as a ski helmet or for cold or rainy weather. There is a tartan "Scots" version, but
it appears to have external cloth and ridges. Straps are leather. Ring fit. An interesting helmet. Meets the European
CEN bike and ski helmet standards. Retail is 85 Euros and up.
- Pedelec: sold as a helmet for electric bike riders, a nicely rounded profile with modest vents and inmolded.
An interesting helmet, but Abus apparently certifies it only to the CEN bike helmet standard. LED rear light. Ring fit.
Retail is about 85 euros.
Metronaut: An urban helmet designed to look like an oversized cap, with a cloth cover and long
visor. No vents. Comes in tweed and solid colors. Retails for 55 to 70 euros. See also Yakkay
and Casqu' en Ville.
- Aven-U: a skate-style helmet but has a thin shell and is inmolded. Has narrow rectangular vents. Retails for
45 to 60 euros. The hard shell version of the same design is the Scraper, retailing for 20 to 45 euros, and in
small sizes as the Scraper Kid.
- Urban-I: a road helmet with reasonable vents and a well-rounded external profile. There is a bright "Signal
Yellow" option, and a Signal Red. Worth a look as one of Abus' best models with vents for warm weather. Retail is 45 to
60 euros online.
- Lane-U: a road model with reasonable vents and a well-rounded external profile. Retail is 35 to 60 euros.
Appears to be another good compromise between vent area and foam.
- Arica: Road model with large vents. With visor it is the Aduro. The retail price varies a lot for
either model, centering around 50 euros.
- Hill Bill: pitched as a mountain bike helmet, with one pronounced snag point on the top rear. There is a
very visible Signal Orange option. Retail is about 90 to 120 euros.
- S-Force: a lightweight road helmet with rear points and big vents. Retail is 75 to 120 euros. Also available
with visor as the S-Force Peak. We don't know how this one ties into the Abus philosophy statement in the intro
above about keeping the vents reasonable to maintain plenty of foam.
- Tec Tical Pro: a racy road helmet with lots of rear points and big, long vents. Retail is 75 to 120
- New Gambit: a road helmet with reasonable vents and a very nicely rounded external profile. The value helmet
in Abus' line, at 35 to 40 euros.
- Chaox: a road model for kids and youth with points in the rear.
- Mountx: a road model for kids and youth with a single point in the rear.
- Chilly: a child model with good-sized vents retailing for about 26 to 45 euros. Also comes as the Super
Chilly with nicer fittings.
- Hubble: a toddler model with front vents and an innovative system that prevents direct sunlight from
striking the head. Has a flattened rear profile to prevent the helmet from pushing the child's head forward while
riding in a bike carrier or trailer. Ring fit, and the XS size starts at 45cm. Retail is about 25 euros online.
- Smiley: another toddler model, with bigger vents than the Hubble. Still has the flatter rear profile to
prevent pushing the head forward in a carrier or trailer. Retail is 20 to 25 euros.
As far as we know all of the Abus models are certified only to European standards and will not be sold in the US.
Sizes run from 45 to 63 cm (17.7 to 24.8 inches).
Action Bicycle - Acclaim helmets
The Acclaim line of helmets produced for Action Bicycle includes the Metro
nicely rounded design with a ring fit system that still has some elongation in the rear. Action has models from other
manufacturers as well.
Action and Senhai are both brands produced by Foshan Senhai
Sporting Goods in China. They have a wide range of bicycle and skate helmets. Their models are mostly sized between 48
and 61cm, but one large one goes up to 64cm. Although the catalog says "Most products are issued with CE, GS and TUV
certification," Senhai is marketing in the US, so must be planning to produce CPSC-certified product as well.
Aegis is a Taiwanese company with an extensive line of
helmets, who recently began using their brand Aegis rather than Hopus as the company identifier. They are known for
innovative construction techniques. They say their hard shells are all made with industrial grade ABS for best impact
performance. Some of them have a layer of resilient foam for multi-impact performance, a feature they call SIS. Aegis
also has thin-shell models, some inmolded, and a unique fiberglass model that is inmolded. Some have stainless steel bug
net in the vents. Their US models are all CPSC certified, but others may meet only CEN and be intended for the European
market. Most of their models are sold with other brands on them, but in 2010 Aegis launched their own Aegis brand. In
2009 Aegis had introduced a unique halo lighting system that uses LED's to light a 30 cm diameter ring around the helmet,
on an inmolded model that retails for a very modest $20 to $40. We found the light output of the halo ring disappointing.
Aegis now sells mainly in Europe. They use dual-density liners, making the helmet lighter and perhaps improving low
Aegis has pared down its large line:
- T-1: road helmet with a one-piece shell giving full coverage of the liner. Has LED blinker and the halo
light band, powered for 300 hours by two AAA batteries. It is a round and smooth profile except for the bump in the
rear for the batteries. Retails for $38.
- MF-2, MF-5, MF-6, MF-7, MF-8 and MF-9 May Flower: all skate style models that debuted in 2004, with similar
hard shells but variations in the vents. They are inmolded with hard polycarbonate shells, a unique combination. They
have the well-rounded shape of skate helmets. The MF-2 Classic is a snow series model for winter sport use with ear
flaps and a goggle retainer in the rear. It is certified to the ASTM F2040 snow sport standard as well as the CPSC and
CEN bike standards, so it is a true multi-sport helmet. Can be had with very visible flame graphics and a nice metallic
- FSK Free Skating a hard shell skate-style helmet with an ABS shell and EPS foam liner.
- D-1 Diki: a child helmet for equestrian use with ABS hard shell. Has vents and an overhang in front to
provide a partial visor. The XS fits heads as small as 52 cm.
Aegis has sizes in most models to fit 50 to 62 cm heads, but some models only go to 60 cm.
See Lucky Bell
AGV has one five star motorcycle helmet among those tested and ranked by the British
government's SHARP project
, the only ranking system of its kind.
All Pro and All Top
See Tung Kuang
Alpha helmets have previously been found in the US under two other brands, but not as Alpha.
Some are made by Mien Yow Industries Ltd.
in Taiwan. They have a line of well-rounded models led by the very well-rounded Argo Nuts 2 with an ABS hard shell and a
flashing LED taillight built in. They have skate and toddler models as well. The manufacturer says their retail prices
run mostly in the $20 to $25 range. Alpha also makes hockey, ski and batting helmets.
Angeles is primarily a tricycle and baby buggy manufacturer. We have not seen their trike helmets in person,
but the Angeles Toddler Trike Helmet is available from Best Price Toys
at $22 to $30 and is among the smallest
toddler helmets on the market, designed for heads as small as 45.7 cm (18 inches). It is advertised as meeting both the
CPSC standard and the Snell B95A standard, but we were unable to identify it among those on the current Snell certification list
. As of December, 2011, the
Best Price Toys site still includes an incredible statement: "Safety Tip: For maximum protection, CPSC recommends
replacing after 1 year of use." Whoever wrote that should be ashamed--CPSC has never made that recommendation.
This Armor is the brand distributed by SDS Skateboards
the US. They have a skate model with the usual hard ABS shell that comes as the Youth Series, Old School Series and
. It is the classic skate shape with small vents and CPSC certification, but is not certified to the
ASTM F1492 skateboard standard. There are some bright, very visible colors along with drab camouflage. Retail runs from
$20 to $35. You can ignore the statement that their helmets use "high density ABS foam." That's the shell material, not
the foam. And the ace skateboarders in videos on the SDS page don't have a helmet on, either. See below for a second
Armor. We don't know if they are related.
Armor Manufacturing Corporation
This Armor is a brand of kid's helmets. The web address is vikingxkids.com
Ascent helmets are made in Taiwan, and sold in the US market by Performance and Bike Nashbar. There are at
least five models, none of which we have seen. Some are inmolded, others have less expensive glued-on shells. Retail
prices start at $20 plus shipping. The Strada
at $40 has more radical lines and rear point.
The Avenir brand is distributed by Raleigh, and sold online as well. They have a variety of inmolded
and taped-on models, mostly with moderate rear points, rear stabilizers, pinned-on visors, and prices ranging from about
$15 to $40. Models include:
- Mercer: inmolded with a two-piece shell covering the lower foam, three rear points. Retail is $40.
- Escape: inmolded. $30. Also available in pastels as the Devine Escape for women.
- Sonic: Taped shell, dial fit, moderate point in rear, reflective material in rear. $25.
- Sonic Jr.: Toddler helmet with ring fit, dial adjustment. $15 retail.
- Ranger: Youth model (ages 5 to 11 suggested) with taped shell, rear point. $16 retail.
- Avenue: Taped shell, rear point. $20.
- Ginger: Youth model with taped shell, minimal rear point, pastel colors.
- Dottie: Toddler model with taped shell and vents, round and smooth. Retail is about $16.
- Hartigan: Skate model. Sells for about $25.
As usual, prices are less online, but often do not include shipping.
Azonic/O'Neal USA has mostly hard shell, no-vent full face helmets for
BMX. They have removable inner liners for cleaning and the standard large bolted-on BMX visors, always a potential
snagging hazard. Most have the fidlock buckle, held closed with a magnet.
- Exile: introduced in 2012, a bicycle helmet with extra rear coverage. Has ribs and points, as well as large
vents. Ring fit. Retails for &80, and worth a look for the extra coverage.
- DH900 Carbon: Azonic's top of the line downhill mountain bike model, with a full-face carbon fiber shell.
Lighter than the O'Neal brand motorcycle helmets, but meeting only the CPSC standard. Round and smooth, with vents and
a big BMX-style visor to snag on. Retails for $200.
- Airtech: A full face model minimal vents. Round and smooth with a big visor. Available in brighter white
graphics. Retail is $130.
- O'Neal motorcycle models: in its motorcycle persona, Azonic/O'Neal has a number of very protective full face
motorcycle helmets. They are made by KBC in Korea or THH in Taiwan, and are certified to DOT, European and Australian
motorcycle helmet standards, tested to impact levels that exceed by a wide margin any bicycle helmet standard in the
world. Some of their models are designed to fit with neck braces. They include the 8 Series, Azonic DOT, 3 Series, 5
Series, 7 Series, Tirade and Monster.
Azonic helmets fit sizes from 54 cm/20.5" to 64 cm/25".
Barbieri Accessories began in 1985 with a revolving brush chain
cleaner, adding other accessories like carbon fiber and titanium mini pumps. Perhaps to round out their accessory line,
they have two adult helmets and one toddler model. All are certified to European standards.
- CAS/3018IN: a 2009 road model with rear points, inmolded, with larger vents.
- CAS/235IN: Another road model with rear points, introduced in 2009 with glued-on shell.
- Helmet: Barbieri's original model, with a distinctive bumpout in the back. No longer in their web catalog
but still on the web page.
- Kid Adjustable: A vented toddler helmet with ring fit and taped on shell. Also comes as the Kid
Small, apparently in a smaller size, but also with a ring fit.
BBB (Bikeparts for Bikers by Bikers) is an aftermarket bike component manufacturing company founded in the
Netherlands in 1999. They distribute a wide variety of bike parts and accessories, and have been expanding to new
markets. In Europe they have 27 helmet models. Some part of their helmet line may reach the US as well. High end models
have anti-bacterial pads and insect mesh in the front vents. Most have reflective rear stickers. BBB attempts to position
itself as a value brand.
- Varallo may be the most interesting helmet in the BBB line, an inmolded "mountain bike" helmet with chunky
lines and possibly more coverage in the rear. Recessed strap anchors, visor.
- Falcon is the top of the line road model, inmolded with carbon fiber and aluminum reinforcements. The vents
are very large. It has the usual high end points at the rear, nicely recessed strap anchors and flip-open strap
adjustors. There is a visible white option. Retail is about 200 euros. With visor it's the Everest at about 10
euros more. Also comes as the Fenix without the carbon and aluminum for about 100 euros, and in that version as
the Moco with a visor for a little more.
- Griffon has a more rounded rear profile than the Falcon, and is inmolded for about 65 euros. Also comes for
a little more as the Taurus with visor.
- Kite: road model, available with visor as the Elbrus.
- Hawk: an inmolded road model with large vents and a pronounced rear overhang, also available with visor as
- Traffic: a nice take on the commuter style, with lots of vents and a very rounded profile unfortunately
spoiled for no good reason by a pronounced lip sticking up at the top.
- Rapido: No side vents, and the camo model has a definitely military look. Also available as the
Police model in white with Police markings. Available only in size medium.
- Tabletop: a classic skate-shape.
- Child and toddler: BBB has at least six child and toddler helmets.
- Tribase: time trial model with a medium long tail in back and four narrow adjustable vents. Can be found for
less than 100 euros.
Most BBB helmets fit heads from 52 to 62cm, with the toddler models going as small as 46cm.
Black Market Mercenary Labor
Whimsically named for its low wages, this company has one full face model for BMX that
sells for $250.
Bell is still the largest company in the US bicycle helmet
market. They also own the Giro brand. They have been making bicycle helmets since 1975. We spend more space on their line
than most others because people want the info. In 2013 they are pushing a new action-sport, gritty, off-road and mountain
bike racing image.
In 2009 Bell announced a new fit system called True Fit for some of their discount store models. It attempts to make
fitting easier and more automatic, and in our testing it succeeded. You can check it out on our True Fit page
. We consider it their most significant achievement in recent years. It is not available
in bike stores, only discount stores like Target and Wal-Mart. For 2010 Bell brought a similar system to a few of their
higher-end bike store models, including the Splash kid's model below and the adult Giro ProLight. In the bike store line
it is known as One Step, and is not designed to work as well without adjustments. Help with fitting is part of what you
are paying for in a bike store, after all.
All of Bell's adult and youth models are now inmolded. Their toddler helmets and their mass merchant line have taped on
shells. All of the models below come in white or at least one bright color combination. We found that the straps on many
Bell models would not stay in place when adjusted despite their "cam lock" side pieces, and would have to be sewn or
locked with rubber bands snugged under the strap fittings to hold the adjustments, but that is a common problem.
Some Bell models have a no-pinch buckle with a tab behind it that keeps the skin from getting in while you push the two
pieces together. It is now included on some adult models, presumably for seniors and others with loose neck skin.
This year's Bell models include:
Bell's European Market Helmets
- Gage: available in May, the top of Bell's road helmet line for 2013, with very large vents and big points on
the back. Has anti-microbial padding, if you want that next to your skin. Retail is $190.
Muni: replaced the Citi as Bell's commuter helmet in 2011. Nicely rounded "urban commuter" profile, of course,
with a full-cover shell. It has Bell's TAG fit system, more fiddly than the True Fit models in discount stores. The
buckle is the ratcheting tab one until now found only on Abus and Uvex helmets. It has the advantage of readjusting
the chin strap every time it is fastened, and could be snugged up while riding if sweat causes the strap to slacken.
The Muni has a visor with a rain gutter,
and a flimsy but very adjustable mirror at extra cost that unfortunately requires you to use the visor. It comes
standard with a pair of blinking LED lights built into the rear stabilizer, and it accommodates the optional
Bell/Blackburn Flea series of very small head and tail lights, including one that comes with a solar charger and a
"fuel gauge." Unfortunately the front Flea light also mounts on the visor. Has bright white options, and teal green
for women. Retail for the Muni is $65. Bell has a YouTube video up on the Muni. Other well-rounded
Bells include the Piston, Sequence and Variant below. For a less expensive but equally well-rounded alternative, see
the Impulse below. At $15 to $35 it is still inmolded, and seems like a real bargain if you
can still find it at Wal-Mart's $25 price. There are still a few of the old Citi model available online.
- Piston: replacing the Venture for 2013, this is Bell's value helmet in the bike store line, retailing for
$40. It has reasonable vents and a well-rounded compact shape. In women's graphics it is the Strut, the youth
version is the Octane and the child version is the Buzz. All have a one-size-fits-all ring fit. Retail is
$40 for any of them. They are among the least expensive Bell models for adults and youth sold in bike stores, and
probably among the better values in the Bell lineup, along with the Deuce/Impulse reviewed below under Bell's
- Last year's Venture value design still lives on in the Bell line in the form of the Solar, a road helmet
with a single overhanging shelf in the rear that retails for $35, and in the extra large size that is still the
XLV, fitting heads up to 65 cm (25.5 inches) in circumference, retailing for $40. (See our page on helmets for large heads for more info.) The original Venture is still available online at significant
discounts, but the Piston is an upgrade in shape and style that is probably worth the extra.
- Volt: formerly the top model in the Bell lineup. It has pronounced rear points, with some exposed fiberglass
cloth used for reinforcing and "composite fiber intake" accents to open up larger vents. Has a lower shell for full
cover, and the antimicrobial padding. Comes with matching visor and plugs for the visor holes when you don't use it.
Sells for $175.
- Array: somewhat similar to the Volt but lacking the fiber vent edges. On the plus side, the rear points are
considerably less sharp than the Volt, so you pay less for a better external configuration. Visor and visor hole plugs.
The retail price remains at $100.
- Lumen: resembles some older Giro models, with rear points and many long vents. The shape is at least
compact. It retails for $65.
- Sequence: the round, smooth model you should check out if the Muni or Citi are too round for your taste. It
has enough edges and ridges to retain design interest. Bell is pitching it to mountain bike and city riders. Most
colors seem drab, but there is a visible white option. Vents in the Sequence are larger than the very similar Variant
below, and considerably larger than the Muni. So is the price, at $90.
- Variant: pitched for mountain biking. Like the Sequence, it has the new "compact" shape without an elongated
rear, and qualifies as a "rounder, smoother" helmet, although it has one tiny shelf sticking out in the rear. It has
top and bottom outer shells for full cover. Retail price is $80.
- Slant: full-cover shell and three modest points in the rear. The Slant was one of only four helmets rated by
Consumer Reports in their June, 2006 article as providing superior impact performance and awarded the Best Buy tag.
Worth a look for that reason, despite the points. Retail is $55.
- Sweep: Bell's top of the line back in 2007, with 11 choppy points on the rear giving it a porcupine effect
and beginning to look "old school" compared to the compact models. Inmolded with a lower shell. Visor. Retail is
- Influx: Listed as a mountain bike helmet, inmolded with visor and a modest rear point contributing to the
overall elongated shape. The Influx is available only in the US, but what appears to be the same helmet is available in
other markets as the Alchera, or with visor as the Delirium. We have an email report from one European
buyer that his Alchera was certified to the CPSC standard. Retail is $65 in the US.
- Tater: a 2012 model for toddlers and for kids over 5. It has Bell's One Step fit system for easier strap
adjustment. Bell has used softer internal fit pads and upscale strap webbing to distinguish it from the less expensive
True Fit models at Wal-Mart, and it still requires some adjustment. Inmolded with bug net in the front vents. Retails
- Full 9: new for 2013, a high-end downhill mountain bike racing helmet with chinbar designed to compete with
last year's Specialized Dissident. Motorcycle-style design certified to CPSC, ASTM F1952 downhill and ASTM F2032 BMX
standards, verifying the performance of the additional coverage. A carbon shell bridge keeps hair out of vents. There
is a breakaway mount for helmets tested during development of the ASTM visor and accessory breakaway standard now in
development. Interior vent channels, with an add-on Ipod Shuffle accessory for riding up those lift lines. Compatible
with the Eject removal system that alerts EMT's to features that facilitate helmet removal. Retail is $400.
- Super: new for 2013, a downhill helmet with skate-style coverage, coming down much further in back than the
usual bike helmet. It has oval vents and a unique design at the sides with angular lines. Meets only the CPSC or CEN
bike helmet standards, not the ASTM F1952 downhill mountain bike racing standard, so the impact performance of the
additional rear protection is not tested and therefore not known. Whatever the marketing, this is a helmet designed for
regular bicycling, where the additional rear coverage is as welcome as it is for racing. Bolted on visor, with brow
vents underneath. Goggle arms. Breakaway camera mount. Retail is $125.
- Drop: a full-face downhill mountain bike racing helmet with chinbar. It has a fiberglass shell, small vents
and the well-rounded shape that is traditional in BMX helmets. It also has the traditional bolted-on BMX visor. It has
a full chinbar, but like most other downhill racing helmets there is no impact foam padding in it. The Drop has a roost
guard to keep dirt kicked up by riders ahead of you in the pack from getting into your helmet. The Drop resembles a
motorcycle helmet with vents. It meets the ASTM F1952 downhill mountain bike standard, tougher than the CPSC standard.
Sizes run from 51 to 63 cm (20.1 to 24.8 inches) in head circumference. Retail is still $130.
- Sanction: A 2011 BMX/downhill full face model that replaced the venerable Bellistic. Does not meet the ASTM
F1952 downhill mountain bike standard, so its impact protection is not as good as the Drop. It still has a fiberglass
shell, however, a nice feature at this price point. The largest size is 60 cm/23.6". The retail price is $85.
- Segment: available in the spring of 2013, this skate-style helmet combines an ABS hard shell and a segmented
EPS liner. The liner segments are joined by embedded mesh and can move a little, perhaps helping the helmet to conform
to a hard-to-fit head. Meets CPSC, EN1078 and the ASTM BMX helmet standards, but is not certified to the ASTM skate
helmet standard that requires multiple hits. Retail is $55 for plain colors and $60 for graphics versions.
Faction: Bell's classic skate model is a hard shell design with a dual-density foam liner. The Faction has the
round, smooth exterior of the classic skate helmet, with small rectangular vents on top, front and rear. There is a
nice selection of colors and graphics including visible white and magenta, and flowers for the girls. The Faction
retails for $40 to $45. Bell also produces the Fraction, a scaled-down version for small heads. Bell's catalog
and packaging say that these two models have dual certification to both the CPSC bicycle helmet standard and the ASTM
F1492 multi impact skateboard standard. See our Dual Certified page for more on that.
Those we have found on the market do not say F1492 on the sticker in the helmet. We are disappointed to see that from
any manufacturer, although a loophole in the ASTM standard used to require only that the helmet sticker say "for
skateboarding or trick rollerskating" and did not specifically require the number of the standard. That loophole was
eliminated in 2011, but we have not checked any 2012 or later stock yet.
- Javelin: a long-tailed chrono model for time trials. It has flexible side pieces to make it easier to get on
and off, and a channeled liner with two front vents. Ring fit. Has a removable face shield. The tri-glides--side
buckles--are fixed and cannot be adjusted, but this is not a True Fit helmet, so be sure to try it on before you
buy and try to yank it off to see if it will work on your head. Retail is $200.
Bell has helmets made to the CEN European standard that according to Bicycle Retailer and Industry News
pass the US CPSC standard and cannot be sold in the US market. Foremost among them is the Bell Meteor II
helmet for time trials. This is one you may have seen in Tour de France time trials. Models sold in Europe, even with the
same name as a US model, may meet only the European CEN standard required there, not CPSC. Buyers have to check the
sticker inside to be sure.
Bell's Discount Line
Bell has a separate line of low-priced helmets sold at discount stores and mass-merchant outlets. (More than one fourth
of the company's sales are through Wal-Mart alone.) They are occasionally related to models from the bike store line.
These cheaper versions generally have low-end graphics, chintzy fit pads, slippy straps and cheaper packaging. Most do
not have rear stabilizers. But they are designed to the same CPSC standard as any other helmet on today's US market, so
they provide fine impact protection if adjusted carefully. You may need to either sew or use rubber bands under the edge
of the buckles to hold the adjustments, but that is true of some of the most expensive models. The $10 models seem to
have disappeared from Wal-Mart shelves. The medium-priced line starting around $20 fit better anyway. Many of these
helmets are still produced in the US--millions of helmets each year--but labeled as containing US and Chinese components.
Unfortunately, Consumer Reports does not even test the helmets in this line, since the model names change and go out of
date by the time their article is published.
The rounded profiles we consider optimum have always persisted in this line, since they are cheaper to produce. Models
include the adult Reflex, Radar, Adrenaline, Impulse (see below), Bellisima, Escape, Explorer and Shifter
Radar/Adrenaline/Bellisima got Bell's True Fit system in 2009. Youth sizes include the Edge, Aero, Blade and
. The Aero and Blade also got Bell's True Fit fitting system in 2009. Child helmet models are the Star,
Banter, Racer, Rex, Rival and Blaze/Bella
. The Racer and Rex got the True Fit system in 2009. The Blaze
ten LED's that are run by a motion-activated circuit "for fun effects." It has the usual taped-on shell, poor strap
fitting pieces that do not lock, and sells for $20. We don't know how the battery is replaced. Toddler helmets include
the Sprite, Sprout, Mini, Shadow, Zoomer, Bellino and Beamer/Bling
. The Beamer has the ten LED lights. The Zoomer,
Bellino and Beamer/Bling got the True Fit fitting system in 2009. Many of the names are for the same model with different
graphics or packaging.
Some models in the low-priced line deserve special attention. Bell recalled their Exodus
full-face model in May of
2011. We have more on our recalls page. It had been sold at Wal-Mart and on Amazon. It was a youth sized helmet.
On a more positive note, the Impulse/Impulse Headphones/Vogue/Shifter-Cruiser
are the same helmet in adult and
youth sizes. This model has the same radically round, smooth shape of the Bell Citi. It is inmolded, a higher-quality
construction technique that is unusual in the discount store series. It has reasonable vents, and the upscale camlock
strap adjusters. The price will likely be right when you find it in a big box store. We found a sample at Wal-Mart in
2011 for $30 and Toys R Us also had them for $30. The Impulse is made in USA of US and Chinese components.
Bell has two more low-priced inmolded models in this line: the Escape
and the Explorer
in youth size. We
don't know the designations in the adult size. The Escape is a compact shape model with a minimal rear point that mostly
meets our rounder, smoother criterion. The Explorer has pronounced rear points. Both have the upgraded strap fittings. We
don't have retail pricing for them, but it should be in the $30 range. Our local Wal-Marts usually have one of Bell's
inmolded models, but the pricing is moving up somewhat.
Bell's skate-style models in this low-priced series include the Rage, Psycho, Maniac, Bike Candy, Coaster and
. Again, the names designate graphics and color differences more often than model differences. Some are said by
Bell to be dual certified
to the CPSC bicycle and ASTM F1492 skateboard standards, at least in
the medium and large sizes. They may not be dual certified in the small size.
This line sells for low prices: $20 to $40. Some models are available to non-profits in large quantities for much less
than that, through an arrangement for Safe Kids International. Because of Bell's name recognition, they are among the
best sellers in the low end market. (Check our page on inexpensive helmets
for further info on
sources of low-cost helmets from various manufacturers for helmet programs.)
Bell also produces toddler, skate and child bike helmets for the Fisher-Price brand, and you may see them as X-Games,
Barbie, or Hot Wheels brands. Some models come bundled with bike or skate accessories.
Bell's Replacement Policy
"Consumers who damage their Bell helmets in a cycling accident within 3 years of
purchase are eligible to receive 30% off the MSRP of any new Bell helmet. Consumers can take advantage of the Crash
Replacement program by sending their crashed helmet directly to Bell Sports or by visiting any participating Bell
retailer. Bell retailers are not obligated to process crash replacement helmets. Dealers who do not want to participate
in the program can refer all crash customers to Bell Sports Customer Service."
In 2004 Bell Sports was purchased by Fenway Partners, a private-equity holding company. The Giro part of Bell was
included. Through Fenway, Bell Sports in early 2005 repurchased the Bell motorcycle helmet manufacturing company that it
had spun off in 1991. Then Bell merged with Riddell, known as a football helmet maker. In 2006 Riddell Bell merged with
Easton Sports, and after 2007 the company has been known as Easton-Bell Sports, owned by Fenway Partners, Jim Easton, and
The Ontario Teachers Pension Fund. Most consumers are probably unaware of any of those changes, and as far as we can tell
the changes have had no effect on the company's technical competence or product quality.
Bern's helmets are skate or ski shaped, so they are very
well-rounded except for the rigid visor on one. They have small vents, and none has enough ventilation for hard bicycle
riding in warm weather. Some of them use Brock Foam, a formulation that provides multi-impact protection, but those are
called hard hats rather than helmets and Bern says they "do not meet action sports head protection standards" but may
work better in lesser multiple impacts to prevent concussion. Just don't hit too hard! Their catalog is very clear on the
helmet liners that meet impact standards and the ones that do not. You can check the sticker inside to be sure. Caution:
some of Bern's models come with different liners that do or don't meet the CPSC bike helmet standard. That includes their
Macon, Brentwood, Watts and Brighton models.
For their 2012 helmet article Consumer Reports
tested one of Bern's helmet models, the
Brighton, and found that it did not meet the impact performance requirements of the CPSC standard, rating it Poor. The
Brighton comes in both CPSC and non-CPSC models, and Consumer Reports
tested the CPSC version.
Bern has a trademarked Zip Mold foam that they say uses liquid injected foam that is inmolded and is used in helmets that
meet the CPSC bike helmet standard. It is expanded polyurethane (EPU) a foam in use for many years by a few Taiwanese
Some Bern helmets have interchangeable liners for water sports, ski and winter sport use, including underneath layers and
a knit winter cap. There is a ponytail port on ladies models. There is a channel in the foam liner for glasses and a
removable goggle strap clip on the rear.
Bern is unique among the manufacturers in this writeup for making different helmets for women. Their women's models are
not just pastel color and graphics changes, but different helmets made with different molds. Sizes are smaller, and there
is more room for hair.
For 2013, Bern's models all have hook and loop adjusted rear stabilizers, unusual in skate-style helmets.
Bern's new model for 2013 is the Allston
, a hard shell helmet with bigger vents on top than other Bern models. It
has a Zip Mold liner that can be swapped out in winter for a less-ventilated one. Retail is $90.
Bern's big news for the 2011 season was its G-2
model, with the rounded commuter shape and larger vents than a
skate helmet. The vents can be closed if needed. It is certified to meet the ASTM F2040 snow sports standard, and can be
used with a knitted cover for winter. Retail is $100. Other bicycle models include the Nino
for kids, also meeting
the CEN and CPSC bicycle helmet standards and the ASTM F2040 ski helmet standard. There is a visible white option. The
girl's model is the Nina
, in white and pastels. Retail is $200.
Bern's sizes range from 48 cm in the Nino model to 63.5 cm. in the Macon and Brentwood models. Those two models have
three sizes of shell, with fit pads handling the intermediate sizes.
Some Bern models with EPS or Expanded PolyUrethane (EPU) "Zip Mold" liners are sold in the US market, labeled with
stickers certifying that they meet the CPSC standard and the ASTM F2040 ski helmet standard. That would include the
Brentwood, Berkeley, Brighton, Carbon Fiber, G2, Nino, Nina, Macon and Watts
. But the multi-impact Brock foam
version of the same models would not meet CPSC. It could not be sold here as a bicycle helmet, but could legally be sold
as a skateboard helmet. Others are certified to the CE 1385 Canoe/Kayak standard. No Bern model is listed as meeting the
ASTM F1492 skateboard helmet standard, although most of them are skate style helmets made for use by skateboarders.
For rounder (Asian) heads, Bern has a special pad kit they call the "Japan Fit" kit with top pads and inserts for their
"Hard Hat" models that convert them to fit rounder heads. The kit can be ordered directly from Bern. Longer heads are
accommodated by adding fit pads on the sides.
The side strap adjustors on Bern helmets hold very well, among the best we have seen. They are Bern's own brand. For 2013
Bern has some bright neon colors in their line.
Retail prices for Bern's models are mostly in the $45 to $110 range, but can be much higher with options, and the carbon
models are $200.
Bern will replace crashed helmets with EPS (one crash) liners for half the retail price.
Bianchi markets team helmets to match their bikes. They have several
models, mostly available in trademark Bianchi celeste blue. The helmets are made by Lazer of Belgium, and correspond to
models of the same number. We found two Bianchi Road models with CPSC certification in the
Bianchi 2013 catalog.
Biologic has a unique folding helmet called the Pango
. It was formerly marketed by Dahon in Europe.
It is the most interesting design of the folding helmets we have seen over the years. It has a round, smooth profile,
although the surface is a plastic mesh. Here it is unfolded:
And the back folds
Here is a YouTube clip
with Biologic's Josh demonstrating the folding and
unfolding, and the ratcheting fit using rear tabs, something the rider does each time. Josh's head appears to be of Asian
parentage, so perhaps the Pango fits rounder heads. Fits 55 to 61 cm heads. Outer panels are replaceable. The Pango is
not certified to the CPSC standard, so it is not be available in the US, Canada, Australia or New Zealand. The Pango has
a visible white option, and still retails for $130 on the Biologic site. Biologic is an international company, shipping
BiOS is a French company founded by a neurosurgeon
whose marketing says their helmet is based on head anatomy rather than testing to standards. Their pitch:
"The cranium comprises zones of maximum resistance called also the resistance pillars of cranium and fragile zones.
Certain fragile zones are crossed by arteries located in furrows situated on the inner surface of the skull. The
fractures of the fragile zones may wound the brain by intracranial haemorrhages.
BiOS is the first helmet in the world designed to distribute the impact in a way adapted to the resistance of the various
zones of the head. Because of its patented anatomical design, BiOS better absorbs the energy by deviating the impact
towards the resistance pillars of the cranium and thus better protecting its fragile zones."
There are few skull fractures in bike crashes if the rider is wearing a decent helmet. It is difficult to see how
redirecting impact toward stronger areas of the skull could protect better against the total g forces to the brain that
are causing the injury.
In addition, the helmets are claimed to be less bulky than traditional helmets. The liner is thin overall, but has a
separate raised ridge of thicker, harder foam glued in, in a front to back arc that runs along the side of the head. It
also has small patches of a squishy foam at the temples and in the rear, with a diamond of the same material right in the
middle of the upper forehead. The only advantage we can see for that kind of liner complexity is a weight saving, at a
possible disadvantage of raising the point loading on the skull in the spots where the foam is thicker and harder. The
manufacturer may be betting that the skull can take more load in that area, but we would not, since impact angles vary so
much, while heads move around in helmets and you can't say for sure where the harder foam will contact the skull in a
real world impact. Thinner helmets have to stop the head in less distance than thicker helmets, so they stop the head
faster. That's based on the laws of physics that cannot be repealed by tricky design.
Bios also maintains that the design is adapted to brain vulnerabilities and not just to skull strength.
BiOS says their helmets are for bicycling, roller skating, skateboarding, kite surfing, rafting, kayaking, jet skiing,
paragliding "and other outdoor or indoor sports." The only statement we can find on their site says: "BiOS was tested in
conformity with standards NF EN 1078, NF EN 1385. The results are spectacular: up to 6 times better than the requirements
of the standards." There is a video clip of a BiOS helmet in an apparent CE test, with a 38g peak acceleration. That
would indeed be a truly spectacular result, and about 1/6 of the permitted 250g in the test. A sample of the helmet that
we bought in December of 2008 has a CEN sticker inside.
An analysis of one crashed helmet
leads BiOS to
say that in that particular crash, "All these numbers demonstrate that the protective capacity of the BIOS during this
real impact was at least 3 x 2,5 x 5 = at least 37.5 times better than required by the standards." There is more info on
their French page
than the English version.
Prices on the website are reduced this year to 99 euros, plus shipping of another 10 to 21 euros. There are custom logos
available for 19 euros more, reflective stickers for 10 euros, extra pad sets recommended for "intensive use" at 6 euros
for a pair and a signature model for an additional 100 euros. We paid $148 US with shipping for the sample we ordered in
December of 2008 before prices were lowered. It came reeking of cigarette smoke.
BiOS models fit heads from 53 to 61 cm. BiOS offers custom made-to-measure helmets designed for your head for an
additional 50 euros. The site says they are custom molded, but there is no selection for a size greater than 61cm.
At the bottom of the BiOS web pages appears a small "Made in France." Bios informs us that all of the major components of
their helmets are made in France.
BiOS will replace a helmet for the original owner if it is structurally damaged by a head impact for 10% to 50% of its
original price depending on "the importance of the head impact." They don't explain that further on their website. The
offer is valid for the Carbone and Bix for 2 years after the original purchase date, and for the Anatomic for one
BiOS informed us in April of 2008 that they were looking for a local manufacturing partnership in North America for the
US and Canadian markets.
Trek supplies a wide line of bikes
and accessories to dealers, and their helmet graphics are designed to complement your Trek or Bontrager bike. They market
the helmet line now under the Bontrager brand . All are inmolded. Some models have reflective panels. Most have ring fit
systems. Many have a women's model with different colors and graphics. For 2013 Trek has dropped their one urban model.
Current models are:
- Bontrager Oracle: Trek's top of the line road model, inmolded with a lower shell covering the whole surface.
Has a compact shape, pronounced rear point and large vents. Carbon internal reinforcement, and internal strap anchors
to avoid bumps. Retails for $180.
- Bontrager Lithos: road model with a lower shell covering the whole surface. Has a very well-rounded compact
shape and many vents. Internal strap anchors to avoid bumps. Comes with a visor. Retails for $130.
- Bontrager Specter: road model with a compact shape and rear points. Has two sections with composite
reinforcement showing. Internal strap anchors to avoid bumps. Retails for $140.
- Bontrager Circuit: an elongated road model with sharp rear points, inmolded and retailing for $100. The
identical Trek Circuit is closing out in 2013 as the last Trek-branded model.
- Bontrager Quantum: road model with long vents coming to a rear point. Ring fit. Retail is $65.
- Bontrager Solstice: road model with long vents coming to a blunt rear point. Ring fit. Also comes in a youth
size. Retail is $45.
- Bontrager Big Dipper: very nicely rounded child helmet fitting heads 48 to 52 cm. with large oval vents on
the top only, graphics and an anti-pinch chin pad. Also comes as the Little Dipper, an infant-toddler model
fitting down to size 46 cm. Retail for either is $35.
Trek/Bontrager has a one year free replacement policy for crashed helmets. They have helmet replacement parts on
their website and available through their dealers, including buckles, pads and visors.
Bravo (or "Bravo?" with a question mark added) is the house brand of Asctechs.com/El Sol Trading. They have
and Classic Series
skate-style helmets said to be certified for bicycling, inline skating,
skateboarding and snowboarding. The helmet has the classic skate shape. If the website is to be taken at face value, it
would have to be dual certified to bicycle and skateboard standards, but searching their site for "standard" did not
return any hits. The helmets also have "a special moldable inside to mold the shape of your head after just a few days of
wearing." We don't know what that may be. Sizing on some is given by measuring your head, but others are labeled "one
size fits most." Pricing is in the $25 to $50 range, and there are some bright colors including chrome along with the
usual black and moss green. Asctechs has motorcycle helmets as well, labeled as meeting the DOT motorcycle helmet
Bravo Sports is an importer of many types of equipment.
They import helmets labeled with various brands for mass merchant channels such as Sears, Target, and Toys R Us. They
have a line of skate helmets under the brands Kryptonics, Pulse, VFX Gear and World Industries. We have not seen the
helmets and do not have their retail pricing. The website says at least one helmet is "ASTM/CPSC and Skatepark approved."
But without including the ASTM standard number, it could be just F1447, the bicycle helmet standard that is identical to
the CPSC standard. And "Skatepark" means nothing. In fact at least one of their pages mislabels the CPSC standard in a
statement "World's aggressive helmet complies with CPSC 1203 Standards for Bicycle and Skateboarding." The word
skateboard does not appear anywhere in the CPSC standard, so they just added that, and we consider it misleading.
Briko is an Italian company who began breaking into the U.S. market over ten years ago but has been slow to
push its line here. Briko changed their line completely during 2008, and trimmed it back considerably for 2010. All are
inmolded. Most have bug net in the vents. All are listed as meeting the CEN 1078 bike helmet standard and some meet the
US CPSC standard. Our retail prices are outdated. Their models include:
- City Bike>: Round, smooth road helmet with many vents. May be on its way out, but still available on
- 5.0: new for 2013, a compact style helmet with a rear shelf spoiling the profile. The chinstrap is covered
with leather. Ring fit with a roller adjustment. Retail is $170.
- Liberty: worth a look for its very round and smooth profile and available hi-visibility neon yellow. Has a
small built-in lip in the front forming a partial visor. Extended coverage on the sides. Retail is $80, or $85 for the
high vis. Also comes as the Junior in small and medium, including a clunky-looking visor.
- Mustang: An updated compact design, nicely rounded with a minimal rear point. Has an internal carbon fiber
cage and a lower shell covers almost all of the foam in the rear. The carbon model has exposed composite. Nicely
recessed strap anchors and excellent strap fittings that should hold adjustment very well. This one meets the CPSC
standard for the US market. Retail is $140. The Mustang Carbon has been dropped.
- Falco: a compact-profile road model with a modest rear point. Retail is $170.
- Raptor: an older elongated road model with a pronounced rear point. European model. Retail is $170.
- Shire: an elongated design with many rear points. Shares the same excellent strap fittings with the Mustang.
Retail is $70, or $80 for a neon yellow. This is Briko's best seller in the US.
- Paint: a youth (small) helmet that is reasonably well-rounded but has a strange profile that rises in a flat
plane to a ridge before dropping off in the rear. Comes in bright colors. European model.
- Pony: toddler model with vents and a very nicely rounded profile. Inmolded. Has bug net in the front vents,
and some bright color options. European model.
- Street: Briko's skate style model with hard ABS shell and small vents.
Cannondale returned to the helmet market in 2012 after a long
absence. They have one standout model--the Teramo. It is the only bicycle helmet in the US market that is built with a
dual-density foam liner, and only the Teramo has it. All of the models are
inmolded. We have not seen their line yet, so these comments are based on their website and emails with Cannondale staff.
Teramo: a road helmet with long rear snag points. Cannondale's only model with a cone-head dual-density foam liner, including one less-dense foam layer to crush more
easily in low impact hits and perhaps help prevent a concussion. The second, more dense, layer has cones that project
into the softer layer, designed to provide a gradual transition as the foam crushes. This may be a worthwhile design
feature, but we don't have testing results to prove that. Retail for the Teramo is $110.
- Ryker: a more compact road model with better-rounded rear profile, but a single-density liner. Retail is
- Radius: road model with rear points. Retail is $60.
- Quick: the value helmet in the Cannondale line is a road helmet with projecting rear shelf. Still inmolded
at $40 retail.
Cannondale helmets are made in two sizes to fit 52 to 62 cm heads.
Cannondale says their helmets meet the appropriate standard for the market where they are sold, so we would not buy one
of their European models that was certified only to the CEN standard.
Cannondale will replace your crashed helmet for 50% of the retail price, but there are many requirements to meet.
Capix is a Canadian brand marketed there through the Canadian Tire stores. Most of their helmets are
skate-style models with ABS hard shells, but for 2013 there is one inmolded bicycle model, the Hellion
. It is a
nicely rounded urban commuter style helmet with reasonably large vents. The side strap buckles do not hold well. Retail
for the Hellion is $50.
Carnac, a noted French bike shoe maker, introduced its first
helmet model, the Hades
in 2010. The Hades is constructed with uniquely angular planes rather than flowing or
aerodynamic lines. In black, it appears to be inspired by the F-17 Stealth fighter plane, itself a 25 year old design
that is being phased out. The Hades is inmolded with slippery strap adjustors and a padded chin strap. Sizes fit 54 to 62
cm heads. We find little to recommend about it, unless you like the unusual style. Here is the Carnac catalog
for occasions when their site is unreachable.
Carrera is an Italian company better known for winter
sport helmets. Their helmets have Italian stylishness, moderate to large rear points, large vents, and some reflective
trim. All are inmolded. We don't know which models are CPSC certified for sale in the US market. All of Carrera's models
are available in bright visible colors, and have good locking side buckles on the straps.
Accordion: a 2013 folding helmet initially dubbed the "Accordion" model. It is made of strips joined by an
elastic frame that opens to provide vents between the strips and folds into a solid piece to reduce the width for
storage. Said to be inspired by the old racers' "hairnets." This YouTube clip from the 2012 Eurobike show shows it in action,
and there is more
on it here. Carrera says it fits well because of the folding construction. We don't like the gaps between the
strips on the front edge, leaving corners that might do more damage to your face in a crash than a continuous edge
would. It is on the Carrera web page. Designed only to the European EN 1078 standard, so not available in the US.
Retail on the web is about $80 for the standard model, and there is a Premium model as well.
- Radius: an elongated shape with unique aluminum cross braces between the vents, and Carrera's top of the
line. The same shape with different trim and features comes as the Razor, C-Storm, Artiglio and
- Cyclone: inmolded with a lower shell coming all the way down, with a rounded top profile and a compact shape
but ending in a moderate but high point giving it a blocky appearance in the rear.
- Blitz: lines sweep around to points in the rear. The same shape with different trim and features comes as
the Gravity and Breeze.
- Daytona: lines sweep around to the rear, but this is the compact shape with minimal rear points. The same
shape with different trim and features comes as the C-Trail and the Krystal.
- Velo-CT: larger and fewer vents, with the compact shape and a modest rear shelf. The same shape with
different trim and features comes as the Grip.
- X-01: Carrera's skate model, in the classic skate configuration.
- Pepe: a toddler helmet with vents along the centerline and bug net in the front vents.
Casco is a German company whose helmets we do not see in the US market.
In addition to about a dozen bike helmet models they make helmets for equestrian, snow and firefighting use. Their
Upsolute models are inmolded. They make some of the roundest, smoothest shell configurations available. Some are unique
designs, but our descriptions come from the website and catalog since the only Casco model we have seen is the Warp II.
Their website info on standards includes only CEN and the German DIN standard, not the US CPSC standard, probably
explaining why we do not see them in the US market. For 2011, Casco informed us that they are looking into CPSC
certification, and we hope to see them here soon.
The website says that inmolded CASCO helmets with their add-on Monocoque-Inmold are heat-resistant up to 100 degrees C
(212 degrees F), a claim we have never seen before from any manufacturer. Baking EPS foam at that temperature for any
period of time normally results in deterioration, with the foam eventually turning yellow and shrinking. And the only
really heat-resistant shells we know of are fiberglass, not the plastic Casco is using. Casco also advertises an aluminum
"roll bar" reinforcement in some models. All are apparently ring fit. Most come in two models, fitting 52 to 57 cm heads
or 58-62 cm.
Casco has several models with nearly perfect round profiles and numerous vents. Those CEN-standard helmets would be worth
a look if you are willing to settle for less than full CPSC protection. Our
Casco models include:
- Warp Carbon: an almost perfectly round and smooth track sprinter/pursuit helmet with an above-the-nose
shield completing the rounding. It has 12 tiny vents that look like hollow rivets, costs 260 euros and only meets the
CE standard, but the shape is flawless for crashing. It has a section of six raised rubber dimples in the rear to lower
air adhesion there. Casco claims it is equally flawless for aerodynamics and that since the aero tails on other chrono
helmets are seldom in the optimal place during track racing, they actually add wind resistance. This seems like a
reaction to the aero tails that have set the fashion in bicycle helmets for the last decade, and apparently it is
selling well in Europe for the riders who actually do benefit from the round aero advantage. We were surprised by the quality of the detailing on the Warp II sample
we bought. The same shape has been used in other Casco helmets, without the face shield and with different
construction. Retails for 260 euros.
- E-Motion Cruiser: designed for users of electric bikes, the E-Motion looks a lot like the
Warp II, with a very round, smooth profile and tiny round vents. Also comes as the E-Motion Air Control,
eliminating even the tiny round vents and using small rear vents that can be closed by a slider. It is also sold as a
ski helmet. Meets only the CEN bike helmet standard. Retail is 140 euros for the Cruiser and 110 euros for the Air
- Ares Mountain: a conventional road helmet with points everywhere, and a roll bar visible in the center vent,
retailing for 170 euros. Inmolded. The bright red model has a color-matched red visor. One mm larger than most Casco
models, fitting 55 to 63 cm heads. Retail is 180 euros. Becomes the Ares Road when sold without visor, for 170
- Activ-TC: an urban helmet with a very round profile despite some angular lines that give it some style. Has
reflective material, and a unique Casco buckle. Retail is 70 euros.
- Cuda: a very nicely rounded profile, almost as well-rounded as the Warp, but with vents. Inmolded, with
apparent extra coverage in the rear. If it met the CPSC standard it would be a strong competitor in the US with
less-ventilated urban helmets. Retail is 130 euros.
- Daimor Mountain: inmolded with rear points, retailing for 90 euros, or 80 euros without visor as the
Daimor Road. Also comes as the Rebell in youth size fitting 55 to 59 cm (21.7 to 23.2 inches) or the
Rebell Lady for women, each selling for 70 euros.
- Viper MX: a downhill racing model in the older elongated form with a removable chinbar. Inmolded, with the
aluminum roll bar. It retails for 100 euros plus another 60 euros for the chinbar.
- G2 Generation: a skate-shaped helmet with bicycle-style vents, with a nicely rounded shape and apparently
very good coverage but a strange screwed-on perforated plate in the front. Inmolded. Comes as the
Mini-Generation in a "junior" version fitting heads as small as 50 cm (19.7 inches). There is a Fun
Generation in bright colors and small sizes, and an FM-Generation with more graphics. Retails for 40 to 50
- Skiller: a classic skate model with small vents retailing for 50 euros. Among the colors are camouflage grey
and black models, presumably designed to make you less visible to other road users.
- Sportiv-TC: a very well-rounded road helmet similar to the Activ-TC but with more vents and a different
visor. Has a raised center ridge that seems out of keeping with Casco's normally smooth designs. Retail is 90
Urban-TC: a skate-style helmet with the Warp lines and a few small vents. Retail is 80 euros. The Urban-TC
Plus looks very similar, but has more vents in the crown and retails for 120 euros. The Casco Scarab is
sold by Kong as a four sport helmet. See Kong below.
Based on the Warp II sample that we have, we would like to see the rest of CASCO's line, and regret that they do not
make CPSC-certified models.
Casqu' En Ville produces helmets in Vietnam with a plain
round "liner" helmet and a cap that turns it into an urban fashion statement. There are two basic liners and a number of
caps and hats in different styles. CEN standard only, and you can order online for shipment in Europe. Prices run 65
euros for the liner helmet and 30 to 35 euros for the cap or hat to cover it, plus about 9 euros for shipping. See also
See also Yakkay
for similar designs.
Catlike is a Spanish company named for its founder, whose bicycle
racing nickname was "The Cat." All of their helmets are inmolded except the toddler model. Most of their line has been
designed to the European CE standard and sold only in Europe, but in the last few years they have begun producing US
models. The strap side pieces on their models slip easily, a common problem. Their helmets are all made in Spain of
Spanish and Asian components.
- Whisper Plus: Introduced in 2006 and updated with a new suspension system in 2013, the Whisper has a unique
nubby outer shape and 39 small oval vents giving an almost Swiss cheese appearance. If you want something different you
will not see many of these on the road. Inmolded. For 2013 the pads have been updated to accommodate four head shapes,
including Asian heads. Pads come in 2, 4, and 6 mm thicknesses. This one is often seen on European racers, and Mountain
Bike World Champion Julian Absalon wears it. Some very visible colors including orange. Strap anchors are mostly
recessed. Retail is $225 in the US for the CPSC-certified version, although it can be found online for much less.
- Mixino: a compact road model with vents that resemble the Whisper and a mostly rounded shape except for
bumps upward in the rear profile. It has large oval vents. It has a "ducktail" effect in the rear. Retails for 130
- Vacuum: a road model with long curved vents and tiny rear points. It has a one-piece full cover shell and
retails for $140.
- Kompact'O: inmolded with a full shell wrapping around the bottom and large oval vents. Has pronounced rear
points as well as external strap anchors sticking up. Has a nylon visor with push-point attachments. There are many
graphic combinations including solid and multi colors, some highly visible, some matching team colors. There are also
women's colors. Lots of reflective trim. Retails for 100 euros, or $145 for the US version.
- Leaf: New for 2013, with a rounded compact shell and large vents. Two position visor. Retail is $110.
- Tako: Road model with a compact shape and big vents. This is Catlike's largest model, labeled as a 62cm but
said to fit some larger heads. Retail is $70.
- Kitten: a toddler model with vents reminiscent of the Whisper and a much more stylish shell than most.
Inmolded. Retail is $42.
- Chrono Aero Plus: a long-tailed time trial helmet that meets the European standard. It is inmolded, and has
two small vents in front and rear. It fits 55 to 60 cm heads. It retails with visor for $170.
- Aero Chrono WT: a long-tailed time trial helmet that is certified by Catlike to meet the CPSC and European
standards. It is inmolded, and has one large vent in front and rear, with covers if you prefer them. The vents are in
the shape of the Catlike logo, probably not chosen for its aerodynamic qualities. Ring fit, for 54 to 60 cm heads. It
retails for $300 with visor and bag.
- 360 degree: a skate style helmet with larger vents than most, probably reflecting Spain's warm climate. Fits
54 to 58 cm heads. 49 Euros.
Closca Urban Helmets
Closca is a startup company offering folding helmets with three concentric rings that press down
on the top to make a compacted ring for carrying. The company believes that their product is more "trendy" than a sport
helmet. They are working on certifications for different markets and expect to offer their line in October of 2013. In
2014 they notified us that their helmet has been certified to the CPSC standard.
Dan Coyle of Corvalis, Oregon, produces wooden
helmets that are unique. The shell is made of wood, machined from a block of wood and treated with "HMVK Polyurea impact
shielding." Some of the interiors are made of sustainable cork, but the ones that would perhaps pass a standards test are
lined with conventional EPS liners. There are four models, including one shaped like a classic skate-style helmet. They
are nicely rounded, with no snag points, and all have round vents. The maker says that some models will pass the CPSC
standard, but he has not had a full test series done for certification. We don't know how they would test after soaking
in water for 4 hours as required for the wet sample, and we don't know how you would test one-off creations when five
identical samples are required for lab testing to the CPSC standard. For that reason we don't consider these as bicycle
helmets. Weight could be considerable, and splintering on impact might be a hazard. The maker says the wood shell aids in
impact management. They can even build to a custom size or shape
Available only from Coyle, and we have seen only photos on the web page and blog
so far. Prices are in the $250-and-up range, depending on choice of wood and liner.
This German company has an extensive lineup. Some of their models are
for Europe, while others are also available in the U.S. market and meet the CPSC standard. All of their adult helmets are
inmolded. All have at least some reflective trim. The company has developed a bright red 6 LED flasher that can be added
to the rear stabilizer of any Cratoni helmet for $15. Cratoni's strap fittings seem to hold better than many other
manufacturers, including the side pieces that lock by twisting a cam. Some of their models have an optional rubbery
surface that we don't recommend due to concern about sliding resistance in a fall. Cratoni has several models that they
sell in Asia just by changing the interior padding to fit rounder heads. (We have a page up on fitting rounder heads
.) We don't have their current pricing. Cratoni will be represented in the US market
in 2013 by SKS
, so their helmets may be seen here again.
- Evolution: a very round, smooth urban helmet with a visor and an optional face shield. Other options include
a magnetic rain cover that covers all of the vents and a built in LED rear light.
- C-Stream: Cratoni's largest helmet. A blocky-looking road model with the compact shape that a gives a
rounded profile despite the style lines and ridges. The largest size fits up to 65 cm (25.6") heads.
- C-Bolt: another road model with larger front vents. With visor it's the C-Tracer.
- Bullet: Cratoni's entry in the lowest weight competition, said to weigh just 180 g and to be the "Road
helmet for weight fetishists." The older elongated shape, with rear points and the partial shell strips pioneered by
Louis Garneau a decade ago. This one would be CEN-only, not a CPSC helmet, so you won't see it in the US market. With
visor it is the Rocket, adding 15 additional grams.
- Terron: the top of Cratoni's line is a 2009 design with huge vents and an unfortunate flair upward in the
rear leaving a pronounced point. Carbon reinforcing. With visor it is the Terrox.
- Ceron: updated with a new liner for 2010, another hyper-vented helmet with sharp shell lines and the usual
rear points. Inmolded, with a lower shell as well. Uses carbon fiber reinforcements, with the bridges visible in the
front shell. Ring fit, and fits longer heads well. The scarlet and white versions are bright and visible. Also comes as
the Achillon with a pin-mounted visor.
- Titan has an interesting style with large squared off ribs and large vents. The rear is compact and rounded
although it has a bumpy profile. It is inmolded with three shell pieces. Retails for $90. Cratoni sells this helmet in
Asia with pads shaped to fit Asian heads.
- C-Wild: a compact design with angular planes and minimal points in the rear. Bug net in the front vents,
metallic colors. There is also a C-Wild Women version.
- Zethos: an elongated model made longer by large rear points. Very large vents, with bug net in the larger
front ones. It comes in small and medium sizes as the Zethos Youth. With female graphics it is the Zethos
Women. Cratoni sells this helmet in Asia with pads shaped to fit Asian heads.
- Xenon: an elongated road model that is Cratoni's "value" helmet. Inmolded, with visor and bug mesh.
- C-Air Youth: introduced in 2008, the C-Air has a more compact shape with small rear points. Strap anchors
are partially recessed. It also comes as the C-Air Women with female graphics.
- C-Maniac: a youth model in small and medium with a detachable face guard. It has a compact profile and
minimal rear points. The chinbar is EVA padded.
- Rapper: Another youth model, with more squared-off lines giving it a snazzier appearance. Has a visor effect
in front and a small shelf that hangs over in the rear. Ring fit system and bug net in the front vents. There are some
bright colors available this year. Includes Cratoni's rear LED flasher. US model. Retail here is $30, down $10 despite
the addition of the flasher, but in Europe it's going for 45 euros.
- C-Kid: a vented toddler helmet with a well-rounded shape and no rear point.
- Interceptor: Cratoni's upscale downhill racing model, with full chinbar, a fiberglass/carbon fiber shell and
a visor bolted on. It comes in flashy graphics or solid colors and has steel bug net protecting the front vents. Small
top vents. It retails for $180. It meets both CE and US CPSC standards.
- Ramp: Another full-face downhill racing model, with a hard shell and bolted on visor. Small top vents like
the Interceptor, but better rounded. Comes in visible white. US model.
- C-Pace: Cratoni's first chrono model, with a classic chrono shape with "shoulders" in the back that taper to
a very long downturned tail. It has large front vents and smaller rear ones, six in all. It is inmolded and fits sizes
53 to 59 cm.
- C-Flow: another chrono model with a much shorter tail than the C-Project. It has large front vents and a
large one in the rear as well. Again, it is inmolded and fits sizes 53 to 59 cm.
- X-Up: a classic skate-style helmet with hard ABS shell and small vents. There is a visible white
Cratoni's child models fit heads as small as 47 cm (18.5 inches) and their largest adult model fits up to 65 cm
(25.6 inches). Their ring fit models normally cover from 52 to 60 cm (20.5 to 23.5 inches).
Cratoni will replace a crashed helmet for 50 per cent of the manufacturer's suggested retail price.
Crazy Stuff has a line of European-standard helmets for kids 3
to 8 years old. The helmets are fanciful cartoon characters. Unfortunately, they have snag points all over the shell in
the form of rigid ears, horns and fins. Many models have rigid teeth along the front edge, the same edge that often
contacts the nose and face when a helmet is takes a hit on the back. You can see a brochure with the designs laid out here
We appreciate the motivation to add play value to helmets so that kids will take to them readily. But this particular
line strikes us as a very bad idea. The helmets could not be sold in the US because the horns, ears and fins would not
meet the CPSC limits on projections from the shell, even if the impact protection were sufficient. But the teeth along
the front edge are particularly troublesome. Parents do not realize the potential for facial injury that they represent.
We can only think that if these helmets meet the EN1078 helmet standard, that standard needs to be amended.
See Shaun White Supply Company
Diadora has a full line of bicycles, and gear to
accompany them. For this year they have six helmet models. All are inmolded. Three have feminine graphics available.
Almost all come in dull grey and black colors with low visibility on the road.
- Free Ride 2.0: a familiar design with the rounded shell we recommend and reasonable vents. Retail is
- Free Ride 1.0: Nicely rounded exterior, very similar to the Free Ride 2.0, but retail is $45.
- Pro Racer 2.0: Compact design with minimal rear points, inmolded with a two-piece shell for full coverage.
Retail is $60.
- Pro Racer 1.0: road model with big points in the back. Retail is $50.
- Pro Racer Jr.: youth model with a reasonably rounded shell, retailing for $40.
- Grom Free Ride: Skate style, but a well-ventilated thin shell model. Comes only in size M. Retail is
DK Bicycle Company has one skate-style helmet, the Synth, made in China
and certified to the CPSC standard. It is inmolded, fits heads from 55 to 61 cm and comes in green, white or black. It
retails for $30.
Docmeter is a French company with a line of bicycle and other helmets. They have one current bicycle model
with the company's rear air bladder fit system. The air bladder appears to be a rear stabilizer that blows up with a
built-in pump to ensure a snug fit. Air bladder fit pads have been tried in the past and abandoned by other companies. We
had concerns in the past about the long term durability of the bladders. Although the website mentions only the CEN
European standard, the company has informed us that their helmets meet the CPSC standard as well. As always, check for
the CPSC sticker inside any particular model. This one is priced at 80 euros.
Dyseone is a clothing and skateboard company. They have one
skate-style helmet, certified to the CPSC standard and selling for about $20.
Dux is a 2012 Canadian company with a single road model in various
versions that has a retractable eye shield. It has big vents and a big upswept tab at the rear. The strap fittings did
not hold well on the sample we saw. Inmolded with a full coverage shell. We don't know what standards it meets. Retail
pricing runs from $180 to $200.
Ebon is made by Co-Union Industry of Taiwan. Their bike helmets are
inmolded, including the toddler models, with modest-to-pronounced rear points. They also have skate models. They use a
ring fit system. Some models have well-recessed strap anchors. Their strap adjustment pieces slip too easily. Visors are
attached with pins to flip off in a crash, as they should. There is a rainbow graphics option, the only rainbow bike
helmet we have seen. Some models have rear LED flashers, and a few have front LED's as well. Ebon's child sizes go down
to 47 cm and most adult models fit up to 63 cm. They are nice looking helmets, and prices should be in the $25 and up
range, depending on whose brand is on the one you buy.
This French company with a high-tech bicycle
clothing and accessories image has a full line of helmet models. All are ring fit.
- Ekoi City E+: a unique urban helmet that is as round as a skate helmet, but cut higher in the back like a
bike helmet. Has two large front vents on the sides, plus smaller center vents that can be covered with a leather strip
in cold or rainy weather. Has a rear LED blinker. Has a visor. Retail is 29 euros, or 39 euros for the City E+
Brazil model with visor, face shield and vent plugs in addition to the leather strip. There is also a white
Girly version with all of that for only 20 euros.
- Fast: road model, inmolded with a full interior cover as well. The requisite rear points are rounded. Said
to be designed to match a 3D study of the head shape of an adult European male. The website says it meets CE, ANSI and
"SELL" standards. ANSI could be the ASTM F1447 standard, identical to CPSC, but CPSC is not listed. Ekoi does not
appear on Snell's list, so "SELL" may be another standard, or the helmet may be among those listed by Snell from
several Chinese manufacturers. Comes in bleu or blanc, but no rouge. Retail is 59 euros.
- X1: road model with points in the rear and a glued on shell. Single size fits 53 to 57cm heads. Retail is 29
- Air X2: road model with a high point in the back. Inmolded. Retail is 50 euros. Also comes as the
X2MTB: with visor, and "real white carbon" bridges. That's a new term for us, since we have never seen white
carbon fiber. Retail is 59 euros.
- X6: another road model, rear points, inmolded. Retail is 55 euros.
- Record: Ekoi's entry into the superlight competition achieves its low weight by only fitting heads from 51
to 54cm in size. It is a toddler helmet made like an adult model, with full interior shell and a big point on the rear.
Retail is 129 euros.
- SQ Pro Team: Ekoi's most up-to-date design is a compact style road model with rounded profile. It has "real
carbon" bridges and is inmolded. It once retailed for 79 euros but has been reduced to 40 euros, so it may be on its
- D25: road model with big upswept points in the rear, and according to Ekoi the newest in their line despite
the dated design. Has composite bridges showing, but this time it's apparently not "real" carbon. Retail is 79
- Chrono CXR11: a classic long tail time trial helmet with some vents in front and rear. Retail is 129
- Chrono CXR12: a long tail time trial helmet with many thin vents in front, sides and rear. Might be a good
one for a very hot day, but the vents would have to reduce the aerodynamic performance. Retail is 149 euros.
- Earthquake: a road model with rear point and built in LED lights both front and rear. The lights operate
from built in batteries that can be recharged from a USB port. Retail is 89 euros.
Ekoi offers a two year guarantee. Their helmets are sold on their own website, so shipping charges should be added
to the retail pricing.
The Eleven81 helmet line is distributed in the US market by Hawley Company. All models are inmolded and have
a ring fit system. Most are available in white or other bright and visible colors. The male buckle pieces are all red to
highlight the release tabs. The strap sidepieces do not hold well on Eleve81 models. Models include:
- Cross Town: a "commuter style" helmet with a very round and smooth exterior, reflective plug in the rear and
a ring fit system. Inmolded with two shells. Visor. Pastel colors and a visible white option. This is the most
remarkable model in the Eleven81 line. It is the same design as the SixSixOne AllRide that we praised in prior years.
It has been Eleven81's best seller in the past and retails for $45.
- Open Road Pro: a road helmet with a compact rounded rear treatment with only modest points. Inmolded with a
double shell. Ring fit, and the side strap pieces slip too easily to hold good adjustment. Visor. Retail is about $45
- Open Road: a road model different from the Open Road Pro, with one elongated point in the rear. Inmolded
with single shell and the ring fit system. Retail is about $36.
- Open Road Child's has a glued on shell and is not really the same model as the adult version, but has the
rear overhang. Vents. $25 retail.
- Half Pint Toddler: a toddler helmet with vents and glued-on shell. It has a rounded shape but an elongated
front to form a visor. Retails for $25.
- Pot Hole: a skate style helmet with a wrap-around ridge added for style. CPSC certified only, not certified
to the ASTM F1492 skateboard standard. Comes in visible red and white. Retail is about $35.
- Err Head: a classic round, smooth skate-style helmet with small round vents in front and small tear-shaped
vents on top. CPSC certified only. Comes in visible white and red. $30 retail.
Hawley offers a consumer-direct lifetime crash replacement guarantee
Elustar helmets are distributed in the US market by Q Cycle. They also have European models certified only to
the CEN standard. They have a range of models included inmolded designs and others with taped on shells. All are ring
fit, and the samples we saw had side strap adjustors that did not hold well. All have rear points except the child
Epsira Oy is the Finnish manufacturer of Knock helmets,
certified to the European CEN standard. They are supplied to such organizations as the Finnish postal service in very
visible orange. Most of their designs appear to have nicely rounded contours and would be called commuter helmets in the
US. Vents are modest in keeping with the Finnish climate, and one model has a plastic weather guard that covers the whole
top and closes vents against wind and rain. They have several models, including the H3, Knock, Inmotion 2 and Champion.
Their Yad model
below is still our nominee for the strangest
shape of any helmet design on the web, with a huge bumpout in back that we would not recommend for its shape.
Some of the Knock child helmets have large team logos and cartoon
characters. The Yad is available in yellow with Hilarious Hiiri (a cartoon mouse) graphics. All of Epsira Oy's helmets
have either reflectors or a reflective band around the helmet. One previous model had reflective straps. Epsira Oy makes
other EPS products and has some info up on EPS. We are not sure their products are still current.
Esco Sport Product Corp. is a Chinese company producing electric and gas scooters, bicycles and carts. It
appears that some of their bike helmets are made with EPS foam and others with EPU, but that's about all we can tell from
Etto is a Scandinavian manufacturer with 21 helmet models on their website. Some are interesting designs, but
unfortunately they are never seen in the US. The website does not discuss standards or pricing. All Etto models have at
least some reflective material on the back, and most have bug net in the front vents. Some of Etto's models have strap
anchors that are not recessed at all, sitting up on top of the shell.
- Bernina: a youth model, inmolded with large vents and what appears to be considerably enhanced coverage in
- Hurricane: inmolded with large vents, pronounced rear points and visible carbon fiber reinforcing. Strap
anchors are below the shell, where they should be.
- Spluga Carbon: inmolded with large vents, the compact shape with less pronounced rear points and visible
carbon fiber reinforcing. Strap anchors below the shell.
- Sempione: inmolded with many small rear points. Has some points in the front, too.
- Motirolo: inmolded with long vents and one rear point. The smallest size is the Motirolo Jr.
- Tornado: inmolded with a wedge shape and modest rear points.
- Jasmine: a model created uniquely for women, inmolded with a more rounded compact shape. The Warm Glam Brown
is a striking design.
- Breeze: compact shape, inmolded with three modest rear points.
- Zero: road model with a taped on shell and two points in the rear. In the smallest size it is the child
- Vortex: inmolded with interior reinforcing and a nicely rounded shape for those with very large heads,
fitting up to 64 cm. Ring fit. Bug net in the front vents. Black.
- Esperito: inmolded, with rounded lines that are chopped off flat in the back "for cyclists that don't want
to look like they plan to ride at 100km/h." Ring fit.
- E-Kid: youth helmet with taped on shell with rounded lines and a visor effect in front.
- Mosquito: inmolded youth helmet with nicely rounded lines. Ring fit. Also comes in a Mosquito Girl
female color scheme. Padded buckle to prevent pinching.
- Ettino: vented toddler helmet with rounded lines and taped on shell. Fits heads as small as 48 cm. Shaped
like an adult helmet, so it is not likely to meet the coverage requirements of the CPSC standard for US sale. Padded
buckle to prevent pinching. Ring fit. Has a visor. May require that a child in a trailer or high-backed child seat have
a thick pad behind the child's back to prevent the rear section of the helmet from pushing the child's head forward and
- Downhill: Etto's downhill model has a chinbar and ABS shell. It has an unfortunate "shark fin" at the top
rear to spoil the otherwise smooth lines.
- Psycho: classic skate style helmet with a hard ABS shell and the usual small vents. Round vents in the
front. Comes in chrome, colors and a "psycho" graphic with a skull and bones. Pad fit. Reflective material on the back.
Etto also produces it for water sports with a neoprene liner replacing the EPS. They don't recommend that one for
bicycling. Also comes in small as the Psycho Kid.
- E-Series: classic skate style helmet with a hard ABS shell and the usual small top vents, plus a unique
small vent at the brow on each side. Etto says they use a "special production process in order to look and feel as
small and tight as possible in use." Also comes in a ski version.
- Chrono: a long-tailed time trial helmet, inmolded with a two piece shell. Small front vents. Fits sizes 53
to 60 cm.
Etto dealers will replace crashed and damaged helmets "at only a small part of the cost."
Fly Racing has a line of motorcycle BMX racing equipment,
including full face helmets. All have bolted on visors, but at least the screws are plastic rather than metal, and would
be more likely to break off when you need them to, rather than jerking your neck. If you want another point, Fly will
sell you a rear fin to add to your helmet. It mounts without screws or glue, so hopefully would pop off in a crash. All
of Fly's models meet the DOT motorcycle helmet standard. Their Lite and 606 models, as well as the THH TX-10 model that
they sell, are on the Snell M-2005 motorcycle helmet standard list as well, offering a level of impact protection
considerably above that of any normal bicycle helmet, including a chinbar with effective energy managing padding. Some
Fly models have the rubber debris deflectors known as roost guards. All of their DOT models are made with dual-density
- 3.4: new for 2013, a full face motorcycle style helmet that meets the Snell M2010 motorcycle helmet
standard. Has a dual-density foam liner and EVA foam in the chinbar for the chinbar energy management required by
Snell. Retail is $160.
- Default: new in 2012, Fly's entry into the downhill mountain bike racing helmet category has only CPSC
certification. It is not certified to the ASTM F1952 downhill standard. That makes it lighter than many full-face
helmets, but gives a lot less protection than the others in the Fly Racing lineup. Has vents, and the standard large
bolted-on visor. With CPSC certification, that visor is required to "readily break away" when impacted. Retail is
- F2 Carbon: designed for BMX, MTB and motocross, has a carbon fiber-Kevlar shell. It uses the same shell as
the Formula below, with a different liner and less expensive aluminum hardware. This one meets both the DOT motorcycle
helmet standard and the tougher Snell Foundation M2010 standard. Retail is $250.
- Formula: Fly's top of the line, a BMX/Motocross crossover helmet with a carbon fiber and kevlar shell, small
vents, stainless steel vents and titanium visor screws. Meets both the DOT motorcycle helmet standard and the tougher
Snell Foundation M2010 standard. Retail is $400.
- Trophy II: full face model with a polycarbonate shell. Certified to both DOT and Snell M-2010. Comes in XS
to XXL sizes. Retails for $140.
- Gmax GMX-46X: Polycarbonate shell, comes in four shell sizes from Youth Small to Adult extra large. Meets
the DOT motorcycle helmet standard. Gmax is a separate brand from Fly. Available in XXL size. Retails for $90.
- Gmax GMX-46Y: smaller and lighter youth version of the GMX-46X. Gmax is a separate brand from Fly. Available
in XXL size. Retails for $90. The Special Edition models come in pink, yellow and orange.
- Gmax GM-76: Introduced in 2011, with a polycarbonate shell. Meets the DOT motorcycle helmet standard.
Retails for $120.
- Lancer: BMX and downhill racing model with full-face fiberglass shell with small vents and radical graphics.
CPSC certified. Retails for $90.
- Kinetic: another full face model, with vents protected by exterior and interior stainless steel mesh. Roost
deflector. Retails for $100.
Fly models are all designed to connect with neck braces, available from them at $200 or $300.
Fly's catalog has replacement parts for their helmets, including mouthpieces, visors, screws, pads and buckles. Sizing
runs from 52 cm (6.5 inch) up to 66 cm (8 1/4 inch), a very wide range. Along with their own brand, they distribute
helmets made by Gmax and by THH.
Fox Racing has BMX and skate style helmets to complement their line of
- Rampage: a downhill racing model with more coverage in the rear than most bicycle helmets. It has a full
face chinbar. Retail is $130.
- Flux: a rounded profile helmet marketed as a skate model but looking more like a road model because of the
large vents. It is inmolded with a two-piece shell and a "spoiler" in the rear that hopefully would detach if snagged.
If you removed the spoiler, it would qualify as one of our "rounder, smoother" designs. Meets the CPSC standard but not
the ASTM skateboard standard. Retail is $100.
- Transition: a skate style helmet with small rectangular vents and a round smooth shape. Comes in visible
white. Retails for $50.
Fox has other models on their website that are promoted for motorcycle use. Their crash replacement policy is a
consumer-direct 30 percent discount off the retail price.
Free Agent is a KHS Bicycles brand. They have a very
well-rounded classic skateboard-style helmet that comes in one shell size with three pad sets of different thicknesses.
It has an EPP liner, good for multiple impacts. It is dual certified
to meet the CPSC standard for bike helmets
and the ASTM F1492 skateboard standard. It retails for $25 to $35 in standard colors or $5 more with a chrome finish, and
can be found on line for as little as $20 plus shipping. It may fit larger heads better than most skate-style helmets.
Free Agent also has a full face BMX helmet at $100, used by their team riders. It has the standard BMX rigid visor that
could be a snagging hazard. Retail is $100.
Fuji has been a major bicycle supplier to the US market for many years.
In 2007 they added a helmet line to complement their bikes, with model names matching bike models in most cases. For 2010
they introduced the helmets below, but by mid-2011 they expect to have a new lineup. Their helmets are mostly inmolded,
with terrycloth strap pads and nicely recessed strap anchors, but slippy side adjustors. :
- RLX: has an elongated shape with a rear point. Inmolded. Ring fit. Retails for $40 with visor.
- SCR: another inmolded model, this time with two shell pieces. One rear point. Ring fit. Retail is $50.
- Toddler model: vented toddler helmet with a taped on shell. Retail is $30.
For crashed helmets, Fuji will replace at "a discounted price."
Funkier is an Israeli company with a line of Chinese-made helmets that
meet only the European CE standard. They have three models. The ones we saw had slippy side strap adjustors. The MV-035
is the most rounded profile of the three, with Ebay pricing on the high side at $80-$100.
Louis Garneau is an independent Canadian designer and
manufacturer with an extensive helmet line along with many other bicycle products. All of their helmets are inmolded
except as noted below. For the European market, Garneau has bug net in the vents of some models. Some models are
available without visor for $5 less. Custom team graphics or stickers are available. Some Louis Garneau models are
designed for the Canadian market and may not be available in the US, but all of the ones listed below meet the CPSC
standard and are sold here. Although Garneau used to make many helmets in Canada, at least some of the models below are
made in China, so look for the country of origin sticker inside if that matters to you. Louis Garneau is one of the
sponsors of Team Type 1, a racing team that includes riders with type one diabetes.
- Course: new for 2013, Louis Garneau's top of the line road model is a nicely rounded compact design except
for one little rear point left sticking up in the air. Very large lengthwise vents. Includes an LED light that attaches
to the rear stabilizer. Retails for a steep $240.
- Le Tour Road: new for 2013, this one is also a road model but has a very pointy rear treatment that already
looks dated. Retail is $55.
- Sharp: a road model with compact design and rear points. Retail is $95.
- X-Lite: Louis Garneau's entry in the superlight helmet competition sparked by Specialized and attempting to
produce a CPSC-certified helmet that is as light as a CEN-only European helmet. The Garneau version looks like a normal
road helmet with somewhat angular lines, but they have shaved every gram they could in foam, shell, stabilizer and
fittings. CPSC and ASTM certified. Retail is $170.
- Edge: elongated design with high rear point and large vents. Retail is $100.
- Carve: mostly compact design with high rear points. Retail is $80.
- Quartz II: nicely rounded profile except for a single pronounced point at the rear. The very large vents run
lengthwise, with internal supports of course and visible composite reinforcements. Garneau's wind tunnel tests showed
this model and the Diamond to be cooler than a bare head. Recessed strap anchors. Had the best strap adjustors in the
LG lineup. There is a bright orange option. Four sizes, including an XXL that fits heads up to 65 cm (25.6"). The extra
effort to add the fourth size indicates that Garneau expects this to be a popular helmet. Retail in the US is $140.
- Diamond II: a road helmet with many large vents and a sharp rear point. Garneau's wind tunnel tests showed
this model and the Quartz to be cooler than a bare head. Has partially exposed composite reinforcements. The shell
pieces wrap under all the way around the rim for extra strength. There is a visible yellow option, and the white option
includes team color decals. There is a matching Garneau jersey. There is a case for this model. Retails for $190, with
another $40 for the case.
- Versa: a road helmet with elongated shape, small raised ridges and pronounced rear points. Inmolded with a
wrap-under shell. Retail is $95.
- Olympus: the value model of Louis Garneau's line is this inmolded compact design with a rear shelf point.
Plainer graphics, ring fit. Retail is $40. The women's version is the Saphir at the same price, and there is an
Atlantis version with no visor for $35. The youth version, with somewhat better graphics, is the Drift,
with visor, for $40.
- Arcterus: the LG value model for those with larger heads, with a compact shell based on the Olympus with
some vent changes to handle the larger size. Still inmolded. Strap junctions do not hold well. Fits longer and wider
heads better than most Louis Garneau models. One rider with a rounder Asian head reports that it fits him better than
others. Fits 62 to 64 cm heads (24.4 to 25.2") Retail is $45.
- Flow: Toddler helmet with a molded in visor extension and glued-on shell. Bug net in the front vents.
Designed for kids 5 to 10. This one has a dial-fit rear stabilizer. The Charlie Brown version has Peanuts graphics. The
retail price is $30.
- Baby Boomer: Toddler helmet for the 5 and under crowd, round and smooth, with a few vents and cute graphics.
The shell is glued on. Strap junctions do not hold well. The smallest model is size 6, for a 48 cm (18 7/8 inch) head.
Retail is $28.
- Street: A hard ABS shell classic skateboard-style helmet with small vents. Has CPSC bicycle helmet
certification and ASTM F2040 snowboard certification but is not dual certified to the ASTM skateboard standard. Retails
- Vorttice: a 2011 chrono time trial helmet, with a shorter rear treatment than other Garneau models and one
rectangular front vent that is large for a chrono model. The dimpled surface in front is followed by a line of hash
marks that Garneau says improve air flow. Comes with a ventilated face shield. It is pitched for triathlon riders, and
said to have good cooling even when off-axis. Retail is $250 to $260.
- Superleggera: a chrono time trial helmet design from Louis Garneau, the first manufacturer to make a chrono
helmet that passed the CPSC standard. This one continued that tradition, and represents the fourth generation of Louis
Garneau chrono models. The Superleggera is dimpled like a golf ball in front for aerodynamics. Unlike most chrono
helmets it has large vents--two in front and three in the rear. It has a medium long tail. The shell is glued to the
liner, not molded. Garneau says the center of gravity has been adjusted to reduce neck fatigue and make it easier to
maintain an aero position. It fits 52 to 62 cm heads. Retail is $180, with an additional $45 for the Rocket Case and
$35 for the windscreen.
- Chronoleggera: Very similar to the original LG chrono model, in a classic teardrop shape with a dimpled
surface. Ears are not covered. Has three small vents. Retail is $130. The older Chrono is still on the LG
website at $100.
- Windscreen: Not a helmet, but an accessory, this is a polycarbonate lens that wraps around a helmet--almost
any helmet--and is held on by hook and loop. It fits all of the LG chrono models. Comes in clear, smoked or
contrast-enhancing yellow. The edges are unprotected except at the nose, and you could probably slice meat with them,
even if it did not shatter in a crash. We would favor something with protected edges, like a pair of glasses or
goggles. Retail is $35.
- H-Cover: Garneau's helmet cover is made of waterproof but breathable fabric. It comes in black or a very
visible bright yellow for $20.
Louis Garneau still has a free replacement guarantee for the first year.
Giant supplies a full line of bikes and accessories to bike
shops. Their helmets have good quality locking strap fittings that hold well.
- Ares: pronounced rear point, carbon fiber bridge showing and internal reinforcement, full wrap microshell.
Three sizes fitted with pads. Retails for $108.
- Realm: introduced in 2010, a very nicely rounded, well-vented road model that appears to have extended rear
- Ixion: pronounced point, this time with an aluminum bridge and internal reinforcing, full wrap shell,
lever-flip strap locks and nice internal strap anchors. Three sizes fitted with pads. The women's model is the
Athena. Retail for either is $80.
- Orion: pronounced point, recessed strap anchors in the full wrap shell. Ring fit, lavender for women. The
larger version is called the Heracles, fitting up to 62 cm heads. Retail is $54.
- Talos: moderate point, ring fit with a dial adjuster. Inmolded, with nice internal strap anchors. Retail is
- Scion: youth model with ring fit and a rear point. Retails for $38.
- Skeeter/Jewel: youth model, ring fit system, with taped-on shell and a very small point in the rear. Retail
- Pup: toddler model, very round and smooth, retails for $25.
- Factor: Full face downhill model with a polycarbonate shell, meeting the CPSC bicycle helmet standard but
not the ASTM downhill standard.
- Vault: skate model with ABS hard shell and EPS liner. Has two front vents and comes in black, white, pink
and blue. The smallest size is the Vault Jr. Retail is $25.
Giro is a subsidiary of Bell, and in 2010 their design and production
facilities were fully integrated with Bell's. Giro designs have been known for a unique fit and a trend leader. The line
has been gradually evolving and adding rounded compact profile models over the past several years, but the most expensive
high-end models still have the elongated shape and pronounced external points. All Giro helmets are inmolded, and high
end models have lower shells molded in as well. High-end models use fitting pads, but the less expensive ones are ring
fit. The Giro line has highly visible neon color options. Some Giro helmets have reflective surfaces on the rear
stabilizers, a logical place for those who ride in the bent-over position. Visors are mounted with pins that snap into
the helmet shell and have an adjustable angle. Our unscientific hand test showed them to pop out readily on impact. Strap
fittings are not among the best for holding securely after adjusting, although those on the Aeon and Rift models do hold
well. Bell, Giro and other manufacturers have lighter hyper-ventilated models produced for the European market that meet
the CEN standard but are not certified to meet the tougher US CPSC standard.
Giro has six women's models for 2013, but their catalog is unusually frank about them: "What about fit for women? - While
it is obvious that anatomical differences between men and women can dictate different patterning and fit for many items
worn on the body, the head and skull are somewhat unique. When measuring men and women's heads, there is no significant
difference in the skull shape, location of skull features or the scale of the ears, eyes and nose between men and women."
Written, of course, by a person with no pony tail.
- Air Attack Shield: This is Giro's biggest news for 2013. Giro has taken a page from Casco's book and
produced an aero helmet that is almost as round and smooth as the Casco Warp. It even has an eye shield to extend the
roundness down on the face. The Giro has more vents than the Casco, and lacks the golf ball dimpled surface. The Giro
is a thin-shell rather than a hard shell. Casco claims the round shape is ideal for those who do not keep the aero
"tail" tucked down on the shoulders. Also comes as the Air Attack without the shield. Both are listed among
Giro's aero helmets, but for most climates they should be rideable on the street in three seasons even with the modest
vents and internal channels. The suspension leaves 3mm in front for air to enter between head and helmet, and Giro
claims it has 90 per cent of the airflow of their Aeon model. The shape is exactly what we have advocated for
years--round and smooth. We would ditch the face shield for street use, since it is made of polycarbonate and would
probably slice meat. It has a magnetic release mechanism that would facilitate detachment in a crash. Available in the
spring of 2013 at $200 and $240 retail. We will be checking out the ventilation when it appears on the market.
- Reverb: The most interesting new model in Giro's lineup for 2012 was this urban model with well-rounded
lines and a smooth exterior. It has long vents and a soft "cap-style" visor. The strap adjustments are sewn like Bell's
True Fit system, but the resulting fit did not feel as secure to us, so be sure this one fits you well before buying.
There are three shell sizes (SML) with fitting pads, and extra pads are included. Since this is a commuter model, Giro
has a neon yellow available in addition to white. Retails for $60.
- Feature: a unique design, round and smooth like an urban helmet, but promoted by Giro as an offroad model.
Giro says it has a little more coverage than others, but it is certified only to the CPSC standard, so there is no
proof of that. It has Giro's fixed strap adjustments on the sides that mimic the successful Bell True Fit system, but
we found the fit did not feel secure at all for us, so be sure it fits you well before buying. The shape is what we
recommend, and the vents are adequate for most riding in most climates. The visor is styled like a mini BMX visor, with
pins at the sides. We hope it will break off readily on impact, but you can always just take it off if you don't need
it. There is a neon color available as well as white. Riders who find the Reverb too plain may want to look at this
one, but be careful to test the fit before buying. Available as a women's model as the Feather. Retail is
- Aeon: the top of Giro's road lineup for 2012, retailing at $250. Similar to Giro's other high-end helmets,
with huge vents and points in the back. Following Specialized's lead, Giro optimized every part of this model to reduce
weight, including the straps, buckle and even the basic shape. We regard that as wasted effort, since nobody complains
about the slightly higher weight of other thin-shell helmets. But if an ounce makes a ton of difference to you, you may
- Savant: introduced in 2012, the Savant has a compact shape while retaining some points in the back for those
who favor that style. We think the strap anchors protrude more than they should on a $90 helmet. Available for the
first time in 2013 as the women's Sonnet. Also comes in XL, fitting heads up to 65cm.
- Xar: a compact shape, well-vented road helmet with a tiny little lip in the rear to suggest the old
elongated styling. More angular lines and not quite as well-rounded as the Hex or Phase (below). Neon yellow as well as
white options. The women's model is the Xara. Retail is $130.
- Atmos: This was Lance Armstrong's helmet back in 2004. The Atmos has interior reinforcing, exterior carbon
fiber reinforcing and an extensive three-piece shell molded on. In addition to several moderate points in the rear,
this model has forward facing points in the middle. We would avoid this one for that feature if no other, since it
contributes nothing at all to the function of the helmet. Uses fit pads rather than ring fit. Available for the first
time in 2013 in a women's model as the Amare. Retail is still $180 but discounts are available on the web.
- Pneumo: for 2013 Giro has revived the Pneumo model, a traditional road model with big vents and big rear
points. If you just can't let go of the old design, this is designed for you. Also available in pastels as the women's
Sapphire. Retail is $155.
- Saros: a compact shape road model with large vents and points on the rear. It has partially recessed strap
anchors. This one has a three piece shell covering all the foam. Uses fit pads. Retail is $125, or it comes as the
Athlon with visor.
- Hex: a reasonably rounded "trail riding" helmet with a shape similar to the former Xen and many vents. It is
not really smooth, but has a compact profile with minimal rear lip. Available in XL, fitting heads up to 65cm. Retails
- Phase: a compact shape design with the nicely rounded profile that we favor, similar to the Hex but with
many smaller vents. Worth a look if you want a reasonably priced high-end Giro. Retails for $75.
- Rift: the mid range inmolded Giro model with a more rounded shape than other Giro road/mountain models and
just one modest point. Plenty of vents. Ring fit. The same Giro strap fittings that slip on other models seem to hold
securely on this one. There is a visible white option but no neon. Retails for $55.
- Indicator: the least expensive Giro model at $40 has a pronounced rear point, but at least the strap anchors
are recessed under the shell. Has a ring fit system. Also comes in a women's model called the Skyla. Without a
visor, it's the Transfer at $35, the lowest adult price point for a Giro and still inmolded. In youth size it is
the Flume, fitting down to 19.75 inches (50 cm) and sells for $40. For 2010 Giro scaled the design up for very
large heads 58 to 65 cm (25.6"), and calls that one the Venti. There are neon yellow options available.
- Surface: A skate-style model with ABS hard shell, "internal channeling" for vents and good coverage. The
front pooks out into a visor. Different colors and surfaces, including one leather model. Meets only CPSC, not the
skateboard standard, and Giro is marketing it as an urban bike helmet, but other efforts at "internal channeling" vents
have produced miserably hot helmets. Retail is $50 and up depending on the surface.
Section: A skate-style model without the usual ABS hard shell. This one has a thin shell, but the usual small
vents. It is inmolded, and Giro says it has a reduced profile. That was accomplished by putting a section of
higher-density foam in the front part of the liner, hence the name Section. It is also cut a little higher in the
front than a skate helmet to clear glasses. Plain colors or a very visible neon yellow or white. Meets only CPSC, not
the skateboard standard, so this is a bike helmet for those who like the skate style and very small vents. Retail is
$45. We are not fans of higher-density foam, so would avoid this one, even though we chose it for other reasons for
our experiment with substances that damage helmets.
- Flak: A skate-style model with ABS hard shell, small vents and good coverage. Plain colors plus white and a
fluorescent orange for 2013. Meets only CPSC, not the skateboard standard. Retail is $40.
Rascal: an inmolded youth helmet. Reasonably rounded profile. This one has the new fit system called One Step
for bike store helmets, similar to the one that Bell calls True Fit for its discount helmet
line. Has two LED blinkers incorporated in the rear stabilizer. Retails for $40.
- Rodeo: A youth helmet with a taped-on shell, not molded. Nicely rounded. Has a ring fit system. Bug net in
the front vents. Color choices include the yellow and black Livestrong combination. Retails for $30. In the smallest
size it becomes the Me2, a toddler helmet with a different fit system. Said to have a low profile in the rear to
permit a more natural seating position in trailers, where thicker helmets can push a kid's head forward unless they
have a pad behind their back. Fits down to 48 cm (18.75"). Retail is $30. Both models are available in neon yellow.
- Remedy: A downhill racing helmet with a motorcycle-style chinbar. It got new graphics for 2009. No longer
advertised as meeting the ASTM F1952 Downhill Mountain Bike Racing standard. It has a nicely rounded exterior, marred
only by the industry-standard bolted on visor, and is well vented for this type of helmet. There is a minimal amount of
EVA foam padding in the chinbar. It retails in a fiberglass shell for $130 weighing 1050 gr (37 oz.) or for $270 as the
Remedy CF with carbon fiber weighing 900 gr (32 oz.).
- Air Attack Shield: a 2013 chrono model reviewed above.
- Advantage 2: A chrono time trial helmet meeting the US CPSC standard. Inmolded with five small front vents
and the usual long chrono tail. Like all chrono helmets, it only makes sense for time trial riders or track use, when
your coach tells you it's needed. Retail is $165.
- Selector: Giro's newer chrono model with no front vents, small rear vents and a shorter tail. Giro says it
accommodates new time trial positions and off center yaw better than the long tail models. There is a removable piece
that attaches to the bottom of the tail to extend it downward if that configuration closes a gap in the rider's hunch
over position. It retails for a steep $275 with face shield.
Giro has other models sold in Europe for use where CEN helmets are required. Those may not meet the US CPSC
standard, even the ones with the same model names described above.
Giro still has Livestrong Foundation colors for the Rift, Aeon, Saros, Indicator and Rascal models, in their 2013
catalog. They announced in October of 2012 that they were terminating their sponsorship of Lance Armstrong, but would
continue to support the cancer community through support of the Livestrong Foundation. (Armstrong is no longer chairman
of the foundation.) That option adds $5 to the cost of the helmet, donated to the foundation. It is predominantly black,
with yellow accents.
This year Giro helmets fit heads from 48 cm (18.75") to 65 cm (25.6"). A graphic in their 2007 catalog showed that at
that time they considered the 63 cm size as the tail of the bell curve distribution of head sizes, but they added a
centimeter for the Atlas II in 2008, and another centimeter when the Venti replaced it in 2010.
Bell/Giro recommends replacing their helmets after 3 years. The Giro crash warranty is the same as Bell's
, a 30% discount if you crash within the first three years. They also offer a credit toward the
purchase of a larger Giro helmet for parents whose children outgrow a child model.
See Fly Racing
Go On Sport - GOS
Go On Sport is the first new Australian company that has attempted to enter the US market in this
century. They hoped to introduce five models here beginning in 2005, in the $20 to $50 range, but we have not seen them
in the US market since. Their helmets are inmolded, and some have two-piece full wrap shells. They are manufactured in
China. In 2011 their website still says "under construction." Their products are available through Sportz Australasia Pty
Golex is a Chinese producer of bicycle,
skateboard, BMX, motorcycle and other types of helmets. There are at least 29 models in their catalog. Golex helmets
should be available in mass merchant channels, and some may be found in bike stores, probably under other brand names.
GPR makes helmets in China to be sold under other brands. They are a large manufacturer for the European
market, and have been looking to bring their lines to the US for some time. You can see at least one of their interesting
new designs in
. We do not have a current catalog or pricing for GPR. Their models include:
- Urbanus: a round, smooth commuter-style helmet with glued on shell and ring fit system. Bug net in front
vents, and a kit is available with ear warmers and vent plugs. European model certified to the CEN standard.
- Bike Helmet (Adults): inmolded with four shell pieces, rear point, ring fit. Bug net in front vents.
European model certified to the CEN standard.
- Spina: inmolded with a moderate point, visor, ring fit. European model certified to the CEN standard.
- Venimos: inmolded with two shell pieces, recessed strap anchors, many vents, visor, ring fit. European model
certified to the CEN standard.
- Virtus: glued on shell but still has external strap anchors in the front, many small vents, rear point,
visor, ring fit. Bug net in front vents. European model certified to the CEN standard.
- Veni: youth model with glued on shell, bug net in front vents, CPSC as well as CEN certification. Two sizes
fit 46 to 56 cm heads.
- Vidi: glued on shell, very round and smooth with only seven vents, visor. Bug net in front vents. Certified
to CPSC as well as the CEN standard.
- Vici: (completes the veni, vidi, vici model series) glued on shell with fewer but much larger vents. Bug net
in front vents. European model certified to the CEN standard.
- Aventicum II: glued on shell, well-rounded profile, visor. Bug net in front vents. Two shell sizes
accommodate up to 62 cm heads. Certified to CPSC as well as the CEN standard.
- Caddy: child helmet with six vents, bug net in front vents and certified only to the CEN standard.
- X: classic skate style helmet with hard ABS shell, small vents, pad fit, CEN certification.
Synergy Sport has one helmet in their Gray line for triathletes, the
. It is a full chrono or time trial helmet, not suitable for street use. It is inmolded with the long
teardrop shape of the classic chrono, with six small slit vents in the front and partially recessed strap anchors. It has
soft "wings" on the sides. Strap junctions do not hold well. It is CPSC certified and comes in one size. It retails for
$150. Synergy Sport has a "Life Time Crash Replacement Warranty" and the consumer can return a crashed helmet for a free
Greenline is a bicycle company with a helmet that goes along with their bikes. It is a simple, somewhat
elongated helmet with a reasonably rounded profile. The company uses various suppliers, so details of the models can
vary. Retail is $25. They also have a toddler model with taped on shell and vents.
Guangzhou Longsheng Sporting Goods Company is a Chinese manufacturer of a line of adult, toddler
and skate style helmets. They market to both the US and Europe. Profiles are generally well-rounded, but there are points
on the high-end road models. The inmolded models are priced about $30, while glued shells are $15 and those with taped-on
shells go for $12. Visors on some models add about $0.50 to the price. The side strap adjustors are simple buckles, and
do not hold their adjustment at all, a serious oversight. For 2013 Guangzhou Longsheng is using Fly Helmets as their
brand, surprising considering that Fly Racing has been around for years with BMX helmets.
GUB Bike International is a Chinese company with a full line of bicycles and
accessories. They distribute a number of brands, including their own GUB helmets. Models range from a full-bore long-tail
chrono helmet to pointy-backed road helmets including one that has a raised point on two arms floating above the rear
shell and another with what looks like a metal spoiler raised above the rear. We don't know their retail pricing.
Haloglow is a Hong Kong company with a helmet that has
fiber optic lights incorporated in the shell. LED's in the rear "lightbox" generate the light, and the optical fibers
carry it in a ring around the shell. The ones we have seen were not impressive, but current production may be improved.
The light can be flashing or steady. According to the web page, the Halolight ELF
model first introduced in July
of 2008 is certified to both the CPSC and CEN European standards. It appears to be an elongated design with lots of
ridges and a medium rear point. It is inmolded, and fits heads from 20.5 inches to 24.4 inches (52 cm to 62 cm); Retail
is reported to be $55 in the US market. Note that the same halo effect using LED's and fiber optics is incorporated in
Hamax is a Norwegian company with a line of bicycle accessories and other
products. Their helmets are child models, with taped-on shells, ring fit and insect net in the front vents. There is
reflective tape on the rear. The company's website mentions only European standards. Their sizing fits 48 to 62 cm.
heads. We do not have retail prices for Hamax.
Happy Way Enterprises
This Taiwanese manufacturer has a nice looking line of Expanded PolyUrethane (EPU)
helmets. All are fully inmolded models, including the D2
and the Vivid
for adults and a G6
toddlers. They are near the $40 retail level. Adding a rear stabilizer or 3M reflective tape adds about a dollar and a
half each. The EPU makes the helmet a little heavier than an EPS helmet, but some consumers like the solid feel of them.
Happy Way sells mostly in Europe, but in the US they sell to importers and OEM's with their own brands. Their sizing fits
47 to 62 cm. heads.
Headlight is a Swedish company with a line of reflective helmets. Headlight has several models,
certified to either European standards for the Euro market or CPSC for the US market. They have two grades of reflective
shells, so the whole helmet is reflective, using the silver gray color that normally produces the best reflective
performance. They apply graphics on top of that. In Europe they were formerly known as Solid, but now produce their
helmets with the distributor or retailer's brand on them.
Headstart PTY (Australia)
Once one of at least three helmet companies called Headstart. This one had nine adult models under the Gear
name. The web link is to a listing of manufacturers, and we do not know if it is current or not.
This Headstart is located in Malaysia, and should not be confused with the Canadian manufacturer
called Headstart Technologies or the Australian company above. When we last heard, Malaysia's Headstart was represented
by Damar in New York. We are not familiar with their helmets.
This formerly Canadian manufacturer and user of EPP foam reportedly moved to the US and
changed its line, supplying helmets imported from China with standard EPS liners. We can't find them on the web now.
This unique West Coast distributor of bicycle products
provides helmets to dealers or non-profits at very low prices. They will fill small orders. In large quantities their
models start at about $5 each, with skateboard helmets at $6.50 and downhill mountain bike helmets that look identical to
major brands for just $30. (Prices are much higher for individual orders.) Some models have rear stabilizers and full
cover shells, features almost never seen in this price range. Helmets R Us also has a genuine dual-certified skate-style
helmet, the Model 17
, that has the stickers inside attesting to the fact that it is certified to both the ASTM
F1492 and CPSC bicycle helmet standards, at a very low price. Sizes range from 49 to 62 cm (19.3 to 24.5 inches).
Hong Kong Sports
The Hong Kong Sportsname is not familiar to consumers and you will not find helmets under their
company brand, but they manufacture millions of helmets for a number of US and other brands, some of them well known.
IXS is a Swiss company with motorcycle history going back to 1906. Their
entry into clothing and helmets is more recent. Most of their models are motorcycle-style full face helmets, but they
also have road and skate-style models. All of their helmets are either compact shape with minimal rear points or very
well-rounded. All of their adult bicycle helmets are inmolded, but child models are taped or glued on. Most are European
models but there are some models certified to the CPSC standard for sale in the US. The current models include:
- Metis: introduced in 2012, a full-face US model with vents, big visor, ABS shell, D-ring buckle and shaped
to be compatible with neck braces. Retail is $145.
- Kronos-3: road model with a two-piece shell covering all of the outside. Despite the name, it is not a time
trial helmet. Large vents. Ring fit. Compact shape with minimal points. Has bug net in the front vents. Has a visible
black and white option. Also comes as the Kronos Team Edition with team graphics and no bug net
- Avoir-2: road style youth helmet fitting medium-sized heads 52 to 59 cm. Has optional bug net in the front
vents. There is a visible blue and white option. Retail is 60 Euros.
- Galaxy 3: road model with the best-rounded profile in the IXS line.
- Juno II: child model with road styling and ventilation, fitting 52 to 60 cm heads.
- Calisto Boy and Calisto Girl: toddler models with taped-on shells and small vents, differing only in colors
and graphics. Bug net in the vents.
- Helios II: another child helmet but with the road helmet shape except for the suggestion of a molded-in
visor in front.
- Phobos: full-face downhill model with the standard big visor and an ABS hard shell with small vents. Six
sizes fit heads from 51 to 62 cm (20 to 24.4 inches), making it one of the smallest full face helmets available. US
- Hammer: Skate-style model with small rectangular vents and ABS hard shell, retailing for $40.
- Hammer LT: Skate-style model inmolded with a thin shell like the Giro Section, with more and thinner vents
than the Hammer, and about 6 oz. (160 gr) lighter. Retail is $50.
The largest helmets in the IXS line fit 62cm/24.4 inches.
J&B is a long-established bicycle wholesaler with
warehouses all over the US. Their products are sold in bike stores. J&B's Airius line has models beginning at about $20
retail to about $30, with a few high end models ranging as high as $50. Their inmolded models start at $20 and qualify as
value helmets. The profiles vary from the well-rounded ones we favor to elongated models with rear points. Colors are
solid on the lower cost models, with higher end graphics as prices rise. Their largest helmets are 63 cm/24.8 inches.
They have an unfortunately named "Skid Lid" (a name from the past) skate-style helmet, certified only to the CPSC bicycle
helmet standard. With a built-in speaker it is $40. J&B has an active program for schools and
either through a local shop or direct. They offer an unusual lifetime crash replacement for all of their
models. J&B distributes the Limar
line in the US as well.
Hangzhou Joy Kie Industrial and Trading Co exports an extensive line of
bicycle, motorcycle and other helmets. The range from nicely rounded road helmets to elongated designs with rear points.
There are toddler models, skate style models and downhill mountain bike models with full chinbars. Pricing is low but we
don't have exact retail in the US.
Kali entered the market in 2009. They have some unique
manufacturing techniques that produces a full line of helmets that are all inmolded, some with dual-density foam liners
molded together so there is no gap between them, and no gap between liner and shell, using all the shell space for foam.
Liner density can be different in various areas of the helmet, or there can be "ConeHead" saw teeth of less dense foam
extending into the dense section.
have more on that on our page on helmet foams
Kali can make full face helmets with chinbars this way, a unique capability among manufacturers. The resultant helmet is
lighter and has a thicker liner than normal motorcycle helmets. Visors have Kali's Pop Out breakaway mount to avoid
snagging hazards. Some motorcycle/BMX models mate with body protectors. The Kali models all have Sanskrit names:
- Maraka: New for 2013, Kali's first bike helmet with the conehead dual-density liner. It is a compact model
with blocky lines and some unfortunate rear points. Carbon and polycarbonate shell, pad fit, "breakaway" visor. Retail
- Avita Composite: an unconventional bike model with what appears to be extended rear coverage, with a
reasonably rounded compact shape exterior marred only by very small rear points. The appearance is dominated by big
blocky vents. The shell is a mix of carbon fiber, Texalium aluminized fiberglass and polycarbonate materials. Kali says
the carbon reinforcing in this one permits them to use less dense foam. We wish we had test results on this helmet,
particularly testing the effectiveness of the extended coverage. There is a white option. Retail is $140 for the carbon
fiber version and $100 for the fiberglass model.
- Avana Enduro: New for 2013. Based on the Avita, a compact road model with small points on the rear. Kali
says it has more rear coverage than the Avita. Retail is $140.
- Amara: compact, nicely rounded road helmet profile despite some blocky lines. Polycarbonate shell. Has a
unique platform on top to attach mounts for camera or light. Kali says it has extended rear coverage. Visible white
option. Retail is $90 with camera and light mounts.
- Chakra: Introduced in 2012, Kali's value model, with many vents and a well-rounded compact profile despite
suggestions of rear points. Sells for $40 in the standard version, or $50 with bug mesh and upscale graphics as the
Chakra Plus. For 2013 there is a youth model for $30 and a child model for $25. This model is Kali's best
- Samra A classic skate shape helmet with the dual-density liner, small vents and composite shell, making it a
very high-end skate helmet. But it is not certified to the ASTM F1492 skateboard standard, just to the CPSC bike helmet
standard. Retail is $50.
- Maha: classic skate shape helmet with ABS hard shell and single-density EPS foam. Traditional small, round
or oval vents. Certified only to the CPSC bicycle helmet standard, not to the ASTM skateboard standard. There are some
bright color combinations available. Retail is $30.
- Avatar 2 Carbon: introduced in 2012, Kali's top of the line full face helmet, with carbon shell and
dual-density foam liner inmolded, producing a light helmet certified to the ASTM 2042 BMX standard. Big BMX visor, very
small vents. Retails for $350. Also comes as the Avatar with Kevlar and fiberglass shell for $280.
- Durgana A vented full-face downhill mountain bike helmet, although it is certified only to CPSC, not the
ASTM F1952 downhill mountain bike racing helmet standard. Has the requisite stiff visor bolted on. The shell is ABS.
The retail price is $150.
- Savara: A full face motorcycle or motocross helmet that meets the CPSC bicycle helmet standard. ABS shell.
Kali's "entry level" full face helmet, retailing for $100.
We expect Kali to continue to produce innovative new products.
Kask is an Italian manufacturer who entered the US market in 2010. Some but
not all of their helmets meet the US CPSC standard, and the Australian standard as well. All meet the CEN European
standard. Most are manufactured in Italy. There are some nice bright color combinations in the line. Their strap
adjustors are average in holding power. Straps have a unique vinyl section at the chin, and some are reflective. Pads are
treated with Sanitized brand chemicals. Kask informs us that their helmets are produced in Italy with no Asian
components. Their helmets are expensive in the US. The road models all have a "mountain" version with visor. Custom
graphics are available. Models are sometimes renamed. Kask bike helmet models include:
- Lifestyle: the Lifestyle is a very round and smooth helmet, with small vent slits in the top. It is a thin
shell, and inmolded. It comes in Vintage trim looking more like a skate helmet or in more stylish Lifestyle
trim. Flip up face shield available, giving it an even rounder look. Euro model only. Retail is $200 for the Vintage
and $250 for the Lifestyle.
- Mojito: introduced in 2012, a road helmet with an unfortunate point the flips up in the back. Retails for
- Vertigo: Kask's top of the line, a road helmet with compact profile but rear points. US and Australian
model. Has all of Kask's high-end details, and is available in women's and Sky team colors. Retail is $300.
- TriVertigo: the Vertigo without many of the front vents to improve aerodynamics. US model.
- Dieci: a compact road model with points both front and rear. Ring fit. Reflective material on the rear and
on strap clips. Strap anchors are not recessed. Available in Sky team colors. Retail in the US is $250. The MTB version
has a visor. US and Australian model.
- K50EVO: Road model with three rear points advertised as "wings in thermoplastic material to ensure effective
shock resistance and aerodynamic quality." inmolded with a lower shell to cover all foam. Strap anchors are not
recessed. The medium size fits 48 to 58 cm while the large goes up to 62 cm. Retail is $150, or $165 for the MTB
version with visor. US and Australian model.
- Kask K31 Chrono: Kask's first chrono is a long tailed model with a polycarbonate shell that has a smooth
rubber edge. It is not inmolded, but is based on a Kask road helmet. The ring fit system fits sizes 53 to 61cm. It has
an optional face shield. Kask says that the shape and internal pivots are designed "for riders who simply cannot get
the back of their head down low whether due to inflexibility, shape of the back or just general movement." It has
reflective trim as if it were going to be ridden on the street. Retail is $350.
- TT-Bambino: new for 2013, a chrono helmet in the Casco style that is almost as round and smooth as any
helmet in the world, with just a hint of oval in the shape. Inmolded with a thin shell. There is a face shield that
completes the round profile. Thin "micro vents" with channels underneath provide some air flow. Has a magnetic visor
mount. Meets the CPSC standard for sale in the US. Retail is $500.
Kask accessories include a winter cap and a storage bag. Their website has model-specific insect net replacement
screens in plastic that are shaped to fit the vents, as well as pad replacement kits and visors.
Kask has some interesting helmets. If their claim to use no Asian components is correct, they would be one of the few
helmet manufacturers still doing that.
has manufacturing facilities in Korea and China. They have more than 20 motorcycle helmet models on the Snell M-2005
motorcycle helmet list and one on the newer M2010 list. KBC has a range of helmets ranging from full-face
motorcycle-style helmets for BMX selling for about $200 to "half helmets" for the Harley crowd.
KED is a German company that had manufactured helmets in Germany
for other brands for more than ten years before introducing its own line. Some of their models have LED flashers built
into the rear, with a replaceable $3 battery/chip unit to power them for 120 hours. (We were not particularly impressed
with the light output.) Their helmets with glued on shells are made with a cold-gluing process that leaves no space
underneath the shell and makes the helmet look inmolded. Gluing the shells on allows them to put the strap anchors under
the shell, a good feature. KED's strap adjusters tend to slip, a common problem. They put a thoughtful pad under the
buckle to prevent skin pinches. All models have bug net in the front vents except the Paganini Race. Their US distributor
for CPSC models is Cycle Force. The website emphasizes that the helmets are made in Germany. Models include:
- Sky: introduced in 2010, the Sky has the round, smooth urban shape, with modest sized vents. Comes in some
notably visible colors, including orange. Fits sizes 52 cm to 64 cm (20.5 to 25.2 inches).
- Paganini: road model introduced in 2010, with a compact and very well-rounded shape and lots of vents. Also
comes as the Paganini Visor and the Paganini Race, a slightly lighter version.
- Status: a compact design that has angles but a well-rounded profile without pronounced rear points. Has bug
net in the front vents. There is a visible white option. With four blinking LEDs in the rear stabilizer it is the
Status Quicksafe Tronic and gets an additional small reflector for 2011. In toddler size it is the Status
- Zenith: a compact design that has angles but a well-rounded profile without pronounced rear points. Replaced
the Xantos. LED flasher.
- Neo Visor: a lumpy exterior design with rounded off rear lines. With rear LED flasher it is the Neo Visor
Quicksafe Tronic. Available in XXL fitting up to 64 cm heads.
- Champion: pronounced rear point, very large vents, LED flasher. Retail is $100. With visor it becomes the
- Certus: nicely rounded compact shape model with big vents.
- Tronus: a very well-rounded compact model with many vents. It avoids the blank look of some urban
- Opus: compact shape, many vents, modest rear points.
- Spiri: road model with another lumpy outer shell with large front vents and rear points. LED flasher. CPSC
and CEN certified.
- VS: elongated but nicely rounded design with a minimal point. LED flasher. CPSC and CEN certified.
- City: elongated road model but better rounded than some with an upswept rear point. Certainly not a classic
city or commuter shape. This is KED's model for large heads, coming only in XXL fitting sizes 60 cm to 64 cm (23.6 to
- Joker: nicely rounded road helmet with double shell protecting lower edges and an LED flasher in the rear.
Available in flower or star graphics.
- Flitzi: another rounded road style, pitched for youth. Has the LED flashers. CPSC and CEN certified.
- Meggy: toddler helmet with good-sized vents and both CEN and CPSC certification "only for American market."
LED flasher. There is a Meggy Originals version with licensed cartoon character graphics, and the Meggy
Sport has a visor. The XXS size fits heads as small as 44 cm.
- Fazer Junior and Street Junior: extra small versions of adult models that have been dropped from KED's line.
Like the Status Junior they are road-style helmets with many vents in child or youth sizes.
- Frox: a skate-style helmet with small rectangular vents. Sizes go up to 64 cm.
- Razorblade: a downhill racing model with a chinbar. It has vents and a visor. CEN certified only.
- Zeitfahren/Time Trial: Chrono model for time trial and pursuit that looks like a regular bike helmet but is
smooth-skinned with no vents in front, and two large vents in the rear. There is a long version with a long rear
fairing added that covers the rear vents. Both versions are CPSC and CEN certified.
KED's catalog has a listing of useful spare parts for their helmets. It includes visors, fit pads, ring fit parts,
the LED battery/chip replacement, buckles and more.
Kent has a line of inexpensive helmets marketed mostly to discount
retail stores and a few bicycle stores. Their helmets are branded Razor
, and at least one is branded as Genesis.
For 2013 there are skate and BMX style helmets. The skate models include the Aggressive Series and Iridium. The packaging
says they are multi sport helmets, but certification is only to the CPSC bicycle helmet standard. One of the BMX models
is the Full Face, a youth sized helmet with vents and a removable chinbar, a unique feature at the $45 price point.
Kestrel is a subsidiary of Fuji Advanced Sports, and a
manufacturer of high-end carbon fiber bike frames. They showed one road and two chrono models for 2009 at Interbike, but
by 2010 their website had just two helmets, both by Louis Garneau: the Garneau Superleggera chrono and Kestrel Diamond,
both Garneau helmets in Kestrel colors and logo. They have disappeared from the Kestrel site in 2011.
A Knucklehead Company entered the US market in 2008, and
is now delivering a line of bike and skate helmets that they make in China for companies who want their own helmet brand.
Some of their models are inmolded, while lower priced ones have glued or taped on shells. Their Palz series has
unfortunate external projections in the form of animal ears, tails, etc. Sizes run from 44 to 62 cm (17.3 to 24.4
inches). The company provides free replacement of crashed helmets.
Kong is an Italian climbing equipment company. They have one helmet from
Casco called the Scarab
that goes beyond dual certified to be certified to European
standards for rock climbing, bicycling/skateboarding, equestrian use and whitewater. All of those standards are easier to
meet than the US equivalent, and the Scarab can't be sold in the US as a bicycle helmet unless it meets the CPSC
standard, but it is an interesting concept. The Scarab has a ring fit system with dial adjustment. It appears to have
external strap anchors. It is also used for spelunking, so there is a clasp in front for a caving light. We were
surprised to see this one selling online in the US market despite its lack of CPSC certification. Some of the retailers
had no regard for the fact that the helmet did not meet US standards, and CPSC does not enforce their requirements.
Kryptonics is a skateboard equipment manufacturer originally
founded to make skateboard wheels in 1965. They have one skate-style helmet, available in black, pink or blue. We see
their helmets in discount sporting goods stores. They do not meet the ASTM skateboard standard. Instead the web page has
a statement saying: Each helmet is designed to pass CPSC 1203 standards for bicycle, inline skate and skateboards use."
That statement is incorrect, since the CPSC standard is not for skateboarding. Further down their page they once had the
correct statement "Complies with US CPSC safety standards for bicycle helmets for persons age 5 and older." But now they
have cut out the "bicycle." We would not recommend buying a helmet from any manufacturer who is that confused about
standards, since there are real dual-certified helmets
out there from other manufacturers that
do meet bicycle and skateboard standards.
Kuji Sports Ningbo is an Asian company based in Taiwan and China. They ship over 4 million helmets
annually. You have not seen their brand here because the helmets are branded for other companies. They produce many
models in bicycle styles, including inmolded road helmets, glued or taped on shell road helmets and toddler models. They
also have four hard shell skate models.
Kylin Motorcycle Fittings is a Chinese manufacturer of bicycle,
motorcycle, ski and other helmets. Many of their models are motorcycle/BMX helmets, but they have 12 bicycle helmets and
one classic skate style model. Some are inmolded, some taped on. Some have Ethyl Vinyl Acetate (EVA) covers. Some of the
less expensive models are nicely rounded, but the upper end of the line all have rear points. All meet the CEN standard,
and many are designed to CPSC. Their helmets will appear in the US market under other brands. Sizes run up to 62 cm/24.4
inches. Prices should be around $15 to $40.
LAS (or L.A.S.) is an Italian company with a line of high-end helmets
that have been made in Italy since 1974. They are available in US bike stores with distribution handled by Trialtir, who
have info on LAS's current US models
but do not distinguish those made in
Italy from the Chinese models. LAS dropped some of its more radical designs in 2010, but continues the emphasis on style.
There are some nice bright colors available and finish quality is good. Most models have silver-impregnated liner
material to retard bacterial growth, a feature that some may appreciate and others want to avoid. The strap junctions do
not hold well on most LAS helmets. The Euro models meeting only the CEN standard are different designs from the US models
we list first. All are still made in Italy, and should be available there.
- Galaxy: new for 2013, a road design with a compact shape and small rear points. Bamboo fabric padding
covers. Retail is $215.
- Victory Supreme: road design with a compact shape, but it still has multiple rear points. Has exposed
composite reinforcing. LAS uses "Carbon Aluminum Technology Absorb" in this model, claiming a 23.7% reduction in force
to the head. There is a visible white option. Retail is $290.
- Victory: compact shape and multiple rear points. Same weight as the Victory Supreme, but the design is a
little different and there is no exposed composite. There is a visible white option. Retail is $200.
- Istrion: the LAS compact model, with reduced rear points and ring fit. There is bug net in the front vents.
Made in Italy. Retail is $180.
- Squalo 1.1: inmolded with sharp sculpted lines and grooves suggesting a helmet for Frodo, with peaks
sticking up at the top. Rear points, two shell sizes fitting 52 to 63 cm (20.9 to 24.8 inches) heads. Retails for
- Squalo 2.2: a 2011 model inmolded and very similar to the original Squalo 1.1, with peaks sticking up at the
top and rear points, but the shell is different, and internal reinforcing allows the vents to be a little larger.
Retails for $230.
- Chronometro: time-trial aero helmet with a polycarbonate shell, no front vents and an integrated clear
partial front face shield. Very long tail to reach the rider's back, with a slight shoulder hump. Certified to both the
CPSC and CEN standards. Ring fit for 54 to 61 cm (21.3 to 24.0 inches) heads. Retail is $240 this year.
- CXT: a very round, smooth helmet with tiny rear vents and a face shield. For pursuit and time trial riding,
this is the response to Casco's Warp with a shape that drops the long tail that most riders don't keep tucked against
their back, visible in all of the Trialtir site photos of the Chronometro.
- Infinito: the LAS "entry level" helmet in the European market. Inmolded with a shape very similar to the
Squalo, but with smaller vents, and there is bug net in the front vents. Retail is an entry level $110.
- Kripton: older style elongated road model with many vents and pronounced rear points. Bug net in the
- Esprit 2: road model with one upswept point in the rear, with large vents.
- Fantastico: toddler helmet with taped on shell and small vents, fitting heads from 52 to 56 cm.
- Freestyle: skate style, with ABS shell and small vents.
The regular LAS line fits heads from 51 cm to 64 cm (20 7/8" to 24").
Lazer is the brand of a Belgian company, Cross HM S.A., established in
1919. Their helmets are showing up more in US shops now, marketed through Quality Bicycle Products. Their high end models
have nicely recessed strap anchors. Kid's models have bug net in the front vents and chin protectors on the straps.
Some of Lazer's models have a ring fit system called Rollsys that narrows the band as it is tightened, rather than just
pushing the head forward in the helmet. Lazer sells the Rollsys helmets in Asia, where heads are rounder, and says that
their fit system adjusts well for that head shape.
Lazer has a four star and a five star motorcycle helmet among those tested and ranked by the British government's SHARP project
, the only ranking system of its kind.
Lazer sells some models in both Europe and the US without having to make changes to meet the CPSC standard. High end
models are different for the two markets, however, since the US version is too heavy to sell well in European markets.
Some models come in a women's version with pastel colors and bright colored straps, said to be "ponytail friendly." Their
built-in LED models run on button cells to reduce the bulk of the battery and permit the helmets to pass impact
standards, although button cells don't last very long and are expensive to replace. Model names change, and we don't keep
track of the old ones. For 2013 there are neon options for most models, with the color molded into the plastic shell.
There are also sunglasses available with short side pieces that end in a magnet, matching with a rubber-covered metal
piece on the helmet strap. In 2013 there are plastic shells that Lazer calls Aeroshells that fit on top of some models to
close the vents for time trials or winter use. Some models have a magnetic buckle.
- Beam: new for 2013, a road or mtb helmet with large vents, blocky lines and a generally compact shape with
only the suggestion of a rear point. It has Lazer's spring-loaded fit system rather than the Rollsys, so we would
recommend trying it carefully for fit before you buy, and making sure it will stay in place in a crash by trying to
pull it off. Retail is $50.
- Urbanize: Lazer's city helmet is round and smooth except for a bumped out integral visor in front. It looks
more like an equestrian helmet than a bike helmet, but has long rectangular vents. Inmolded with a one piece shell.
Comes in visible white, as well as pink and some drab colors. Ring fit. Retails for $80. With a blinking LED light set
into the front and back vents it becomes the Urbanize N'Light, for night use "without you looking like a biking
torch." Retail is $105.
- Helium: a high end helmet inmolded with an elongated shape, rear points and three front points as well. It
has multiple shell pieces wrapping around the lower foam sections. Fiberglass reinforcing shows on top of the bridges
between the vents. The Helium has a dual-density foam liner that reduces the weight by a claimed 40 grams. it has a
non-absorbent gel pad on the front that attempts to spread sweat away from the eyes rather than absorb it. Retail is
$220. The Genesis RD continues as before, with a single density liner and internal reinforcing in a separate
shell, still retailing for $175. Even though the Helium and Genesis are CPSC certified, we would avoid them because of
the points and the hard wheel that sticks up on the Lazer adjustment system. We would not want to crash on that spot.
There is a full plastic Aeroshell available for either model. We have received emails from riders with round heads and
others with elongated heads saying the Genesis fits them well.
- Neon: a road model with a compact, generally rounder shape and one rear shelf projection. Also comes as the
Clash with visor, Skoot for kids, Kiss for women and Vandal with visor for youth. At $60 it
is the lowest-priced Lazer that is marketed as fitting rounder Asian heads. The XXL model fits up to 64cm heads.
- O2 RD: road helmet with the elongated shape and pronounced rear points, big vents and the external wheel
adjustment that we think should not be on the surface of a helmet. But it has the Lazer ring fit system that narrows
the ring as it is tightened to accommodate narrow heads. There is an XXL that will fit up to 64 cm heads. Retail is
$110. There is a full plastic Aeroshell available.
- Sphere: an elongated road model large vents and pronounced rear points. There is a full plastic Aeroshell
available. Retails for $135.
- Rox: an elongated road model formerly called the Oxygen XC, updated with a new visor and fit system. Large
vents and pronounced rear points.
- Nirvana: a 2009 model with more points sticking out in all directions than any other Lazer helmet. It has
the external roller to adjust, and a three piece molded shell. We would pass this one by due to all those external
points. Retail is $140.
- 2X3M: ("too extreme") A unique series of vents gives this one a radical appearance. Inmolded, with a rear
point, and a lower shell. The visor-less 2X3M is the 2X3M RD. Retail for either is $50. There is also the older
X3M model, without the lower shell, but with visor and listed as a "value" model. It has Lazer's older fit
system and is good for narrower heads. Retails for $42.
- Tempo: a "value" model. It is only certified to the CEN standard and will not be seen in the US. Inmolded
with a one piece shell that has modest rear points. Big vents, ring fit. Retails for $40.
- Compact: another value model, this time with a glued on shell rather than molded. Rounded shape. Meets the
CPSC standard. Retail is $30.
- Krux Radical: a skate style helmet with a rounded profile but blocky sections, minimal vents behind those
surface blocks and a small integrated visor. Retail is $70.
- CityZen: a round, smooth skate-style helmet with vents, but covered with a cloth cover in houndstooth,
tartan or solid grey or black. It is reminiscent of the Danish Yakkay, but more Belgian in style. We would avoid this
one for the flaps, visors and cloth cover. The front visor has been reduced somewhat for 2013. Comes as a hard shell
called the Next.
- Sweet: Skate-style shape except for a suggestion of visor in the front, marketed as an urban helmet. Small
vents and internal air channels. Pad fit, fitting different shaped heads with different thicknesses of internal pads.
Available in neon orange and yellow for $100 retail.
- Oasiz: a road model with large vents, compact shape but pronounced high rear points.
- Junior: a vented, inmolded youth model for ages 5 to 10, round and smooth except for an extension in the
front to form a visor. Has an LED blinker in the rear stabilizer. Retail is $43.
- One City: classic skate-style helmet with small vents and bright graphics.
- Armor introduced in 2012, a classic skate shaped helmet with small rectangular vents, but it is inmolded,
with a rubberized polycarbonate thin shell and EPS liner. Meets the CPSC standard. We don't like the rubberized coating
on the shell because it may increase sliding resistance in an impact. Lazer says it fits different shaped heads,
including rounder ones, with different fit pads. There are some nice bright colors. Marketed to urban bike riders in
Belgian cities as well as skaters. Retail is $70, high for this type of helmet. For 2013 Lazer has the Armor
Deluxe with upgraded pads and straps, as well as a clear lower shell for $80.
- Street: Skate style helmet with the same look as the Armor above, but with an ABS hard shell. There is a
Sweet model for women and a Street JR for kids. Retail is $50, high for this type of helmet. In plain
colors or white it is the Next at $40.
- Lazer's biggest news for 2012 was in their child helmets. Nut'Z with MIPS is a compact-shaped road helmet
for kids, with rounded points in the rear, and the similar P'Nut with MIPS is the smallest size for toddlers,
fitting down to 45cm heads. These two have a MIPS slip-plane system. An effort to reduce rotational forces in an
impact, it allows the helmet to slip a little to the side by including two layers with a slippery surface between them.
In this case the inner layer is just an inner fit basket, not a full helmet layer like the POC
models or Lazer's own motorcycle helmets. We think that a rounder outer surface on these child helmets might have
accomplished a similar reduction in rotational force, and the helmets are not tightly coupled with the child's head, so
they will slip anyway. But the MIPS system is at least an attempt to address the rotational forces that probably are
the biggest contributor to concussions, and we are encouraged that Lazer was courageous enough to introduce this
construction in a child helmet. Ring fit with a spring-loaded occipital stabilizer. Retail is $80 for either MIPS
model, or $20 less for the plain non-MIPS models. There is a full-cover outer shell available as an option.
- Bob: toddler "Baby-On-Board" model with a round smooth profile and small vents. Visible white among other
graphic schemes, and comes as a Bob Radical with a "Mohawk" fringe. Certified to CPSC. Lazer's smallest helmet,
fitting 45 to 52 cm heads. Retail is $25, or $35 for the Bob Radical with fringe.
- Max: toddler model with molded in visor in front and a glued-on shell. Some versions have unfortunate fins
on them. Cute graphics including a little "Police" model. Retail is $30.
- Excalibur: BMX full face model with a nicely rounded exterior. Fiberglass shell. Euro model. Available in
white. Retails for $140.
- Phoenix: BMX full face model with a Fiberglass shell and bolted on visor. Retails for $100.
- Wasp: new for 2013, a chrono-shaped helmet with a long tail and four narrow vents. Inmolded. The bulbous
front and tapering, descending rear sections are emphasized in the Fluo Black neon and black model with rings that
imitate a wasp. The name is less obvious in the plain black or plain white models, and Lazer says it stands for Watt
Saving Performance. Detachable sections, since it fits so closely that the rider puts it on in sections with helmet
first, then snapping on sides and adding the tail. Ring fit. Retail is $400.
- Tardiz: originally named for Dr. Who's time machine, but the s at the end has become a z. A chrono model
with a water intake used to replenish an evaporative cooling system, just in case you don't sweat enough in your almost
unvented time trial helmet. Dual shell enables a dimpled rear section that burbles air like a dimpled golf ball for
better aerodynamics. The only chrono model we have seen with a women's graphic version, called the Ldy Tardiz.
There is a full plastic Aeroshell available to eliminate the vents. Retail is $180.
Lazer has an LED cap that fits over their Rollsys adjustor on top of the helmet. It is included with the Neon, and
can be added to other models for $12.
LED is a Canadian company based in Alberta. They have one "one size fits most" helmet, a nicely rounded
road helmet with reasonable vents that has four flashing single LED's around the helmet attempting to cover 360 degrees.
We have not seen them, but the company provided test lab results showing the helmets meet the ASTM F1447-02 standard, so
they would probably meet the CPSC standard as well. All of the results were good, with reasonable g levels. We don't know
what power source they are using for the LED's or how bright they are. Retail should be "in the low to mid 30's."
Lifebeam is a 2013 startup developing a "Smart Helmet." The prototype is Lazer's Genesis model
with an optical physiological sensor in contact with the forehead,
accelerometer (unexplained function), and wireless communication. Their video appeals for capital donations to bring the
helmet to market.
Limar is an Italian brand. Their models usually have some bright color
choices and nice graphics. Some of them are CEN certified only and are not available in the US market. Many of the
inmolded models have unfortunate external strap anchors sticking up above the surface of the shell. Kid's models have
nice pinch protector tabs on the buckle. Their side strap adjustors have not held well in the past, but the ones on the
Ultralight Pro 104 are excellent. Pricing varies by $5 to $10, so we cite the high end of the range, and you may find it
for less. Limar has rounded out its line with helmets from other manufacturers, a common practice. Limar is distributed
in the US by J&B Importers.
- Velov: Limar's big news for 2013 is this unique road helmet with big vents and a compact shape has ridges on
the top. When four large panels are placed between those ridges, it is transformed into a round, smooth aerodynamic
model. The blocky graphics of the panels
make it clear to observers that this is not a skate helmet. The European version is available early in 2013, with a
CPSC version for the US planned to follow. It is being marketed as an urban helmet. Retail price is 80 Euros for the
- Ultralight: billed by Limar as "the world's lightest helmet." The size small is advertised as 160 grams in
the CEN version and 200 grams in the one that is certified to CPSC. There is a Carbon 104 with carbon fiber
reinforcing that is a few grams heavier, and an available visor. Inmolded with large vents, round and smooth profile
except for a rear projection ring that forms a shelf in the rear and spoils the profile for us. Has excellent side
strap adjustors that hold very well. There is bug net in the front vents. Retail is 150 euros with or without visor, or
200 euros for the carbon version. The CPSC version sells in the US for $210. The MTB version has a visor and retails
- 777: new in 2010 when it was billed as "the new trend for roadies" with the compact profile, but marred by
angular points on the surface and in the rear. Retail is 79 euros. With visor it is the 757 MTB.
- 650: a new 2010 model, with compact shell profile spoiled by a shelf overhang in the rear. Retails for 59
euros. With visor it is the 675 MTB.
- 575 MTB: fewer but very large front vents, inmolded with wrap under shell piece. Almost no rear point. Ring
fit. This one retails for $60.
- 635: new in 2011, a somewhat elongated road model with a rearward-facing point on the top and points in the
rear. Retail should be under $60.
- X-Ride: for "demanding offroad and freeriding" with a compact profile marred by one high and pronounced rear
point. Limar cut huge blocky vent holes in the shell, but they neck down to much smaller holes going through to the
interior. With black liner foam the dramatic visible effect is a helmet with immense vents. Has bug net. Retail is 79
- 525: a youth model, inmolded with angular lines and modest rear point. Ring fit. $45 retail.
- 515 All Around: a youth model, inmolded with a rear point and a lumpy exterior. Modest vents. Ring fit.
Retail is $45.
- 149: inmolded, a round and smooth vented child's helmet with a ring fit system. Front shell pooks out into a
visor. Retail is $40.
- 124: inmolded, a round and smooth vented child's helmet with a ring fit system. Front shell pooks out into a
- X-Action: classic skate helmet with ABS hard shell, small rectangular vents that are larger than most skate
helmets and a ring fit system. There is bug net in the front vents, seldom seen on skate style helmets. Retail is 59
euros. Also comes in plain colors with three extra vents in the rear as the X-Urban, with a retail price of $45.
They are advertised as multi sport helmets, but we don't know which standards they meet.
- Cruiser BMX: revised in 2010 with new graphics, a classic BMX full face helmet with small vents, large visor
bolted on and ABS shell. Very plain graphics, no bug net. Retail is 89 euros.
- Nutcase: revised in 2010 with new graphics, another classic BMX full face helmet, with snappier graphics,
small vents and a fiberglass shell. Has bug net. This one is certified to Snell's B-95 bicycle helmet standard. Retail
is 129 euros.
- Limar Speed Demon: a CPSC certified chrono helmet inmolded with 6 long thin vents in the front and 9
elsewhere for a total of 15. Limar says they offer good ventilation "without affecting the aerodynamics." It has a
flexible ear flap to avoid the chafing problem. Ring fit for heads 54 to 61 cm. There is a carbon version, but that
refers to the black color, not the shell material. Retail is $190.
- Chrono: an aerodynamic pursuit and time trial helmet with CPSC certification. Inmolded with 5 small vents in
the rear recessed into channels. Face shield optional. Limar says the short shape permits more efficient bike position
and works better when the rider is out of aero position or standing. Ring fit for heads 53 to 59 cm. Again the carbon
version refers only to the black color, not the shell material. Retails for $170.
Limar is distributed in the US by J&B. Some Limar models are available in Bianchi
Limar makes the Michelin line
Limar has a 3 year crash replacement guarantee, offering a replacement helmet through the dealer at half off.
See Louis Garneau
above under "G"
Lucky Bell is a Hong Kong company producing Expanded PolyUrethane
(EPU) helmets mostly for other brands, with some under their own Aerogo brand. They have bicycle models, most of them
round and smooth, with small to reasonable vents, nicely recessed strap anchors and visors. There are also skate-style
models. We can't fin the Aerogo pages on the web any more.
Mavic is entering the helmet market in 2012, and introduced three models at
Eurobike in August of 2011. Press reports say colors will be black and a very visible yellow. We have not seen the line
yet, but they are marketing in the US, so must meet the US CPSC standard. Mavic says they developed the designs in-house,
but the helmets are made for them by a third party.
- Plasma SLR: the top of the line has carbon fiber reinforcing in the foam and large vents. Two-piece shell
for full coverage. The rear has three rows of three vents, almost like an automotive grill, with a small snag point
just above. Anti-microbial padding. Retail is $220.
- Plasma: no carbon fiber, but aluminum reinforcing in the foam, adding five grams. Retail is $180
- Synchro: another aluminum-reinforced model, somewhat simpler in design. Has a visor. Retail is $125.
MET is an Italian manufacturer with models for road and offroad
biking, a BMX model, youth and toddler models and a chrono shaped time trial racing helmet. They came to the US market in
2013. Almost all of them have points in the rear and the elongated shapes that we do not consider optimal. MET says their
road and off-road helmets differ in the placement of the vents to optimize them for the type of riding, in addition to
adding a visor for off road use. Most of their helmets are inmolded, and some have lower wrap around shells as well.
Strap anchors are under the shell in some models, a nice touch. Logos are reflective, although generally small. The top
of the line models are radically different in appearance. The last time we checked, MET's helmets were not available in
the US. Regarding standards, all they say is "Each and every Met helmet passes the safety standards that apply in the
countries in which they are sold, EN 1078 label in Europe or AS/NZS 2063 in Australia/New Zealand for instance." They
candidly say they have not designed a helmet specifically for women, but all their helmets are designed for both men and
women. Their strap junctions hold well.
- 20 Miles: new for 2013, a well-rounded urban helmet with just a hint of rear lines, large vents, MET's good
strap junctions and an LED flasher in the rear. Visible neon yellow available. Retail is 55 euros. The CPSC version for
the US should be ready in the spring.
- Crossover XL: new for 2013, a compact road design with some rear points. Has a rear LED flasher.
- Forte: an elongated, angular design with moderate vents and a high rear point. Retail is 75 euros.
- Inferno UL: inmolded using "Ultimalite," MET's proprietary fiber reinforcing. Large rear point. Retail is
- Stradivarius : redesigned for 2013, an inmolded road helmet with large longitudinal vents and a single
pronounced rear point. It retails for $250.
- Sine-Thesis: an elongated, angular design with large vents. Retail is 225 euros.
- Pilgrim: compact "all rounder" road model with large vents and very modest points on the rear. Also comes as
the Gavilar without visor.
- Crackerjack: a youth model with a compact shape but angular lines. It has fewer but larger vents than other
MET models. Comes with visor. Retail is 50 euros.
- Terra: a compact design with two high points at the rear and very large vents. US model retailing for
- Kaos UL: a Freeride design, the Kaos is molded in a shell made with "Ultimalite," MET's proprietary name for
fiber reinforcing. It has big vents and big rear points. There is a visible white option. Retail is 130 euros.
- Veleno: inmolded, with large rear points. There are visible white and red options. It also comes in the
largest size as the Predatore fitting up to 64 cm. Without visor it is the Estro.
- Genio/Elfo: a vented toddler model inmolded with a lower shell to cover all the outside foam. Bright
graphics. Has a bump out in front to form a visor and a very useful flattened rear to avoid cocking a child's head
forward when sitting in a child carrier. Retail is 35 to 38 euros. Fits heads down to 46 cm.
- Buddy/Super Buddy: a toddler helmet with smaller vents than the Genio/Elfo and a taped on shell. Fits heads
down to 46 cm. Retail is 25 euros.
In the past, Met's helmets have all been made in Italy, and their website talks about their manufacturing processes,
but emphasizes Italian design rather than exclusively Italian origin. You can order replacement visors and replacement
pads directly from them through their website. We wish more manufacturers would do that, since finding replacement pads
is sometimes a real challenge.
MET has a two year warranty against product defects. They call it "comprehensive" but with some caveats:
"Helmets returned for inspection must be sent in proper individual protective packaging, postage prepaid to the MET
distributor in your country, with a dated proof of purchase and a letter explaining the reasons for returning the
helmet. MET shall not be held liable for any indirect, special or consequential damages. The warranty does not apply to
helmets which have not been used properly according to the MET helmet owner's instruction manual. The warranty does not
cover normal wear. The warranty does not cover damages caused by accidents, abuse, negligence, incorrect adjustment, or
for use other than that intended by the manufacturer. Any modification made by the user will render the warranty null
and void. The warranty does not cover damages due to heat exposure."
Within those constraints, MET retailers can replace crashed helmets at a discount of up to 50 per cent. The buyer
must return the helmet and provide a letter with crash info.
Michelin, best known in the US for tires, launched a line of helmets
in 2005 in conjunction with Zefal, best known in the US market for pumps and accessories. Since known brands sell more
helmets, both companies may be hoping that the well-known brand name will help. The helmets are made by Limar. All but
the toddler helmet are inmolded.
- MX: sweeps back and up with a pointy rear profile. Very large vents including a heart-shaped one in the
front. The strap anchors are recessed into the grooves in the shell. The front vents are designed to work with the
- MS: inmolded with an elongated shape, reasonable vents and a minimal rear point.
- SX1: elongated shell but chopped off in the rear. In youth size and graphics it is the TX1.
- RX1: elongated shell with more rounded rear treatment except for a little tab left sticking out at the top.
With visor it is the MX1.
- RX3: elongated shell with points at the rear.
- RX4: elongated shell with rounded rear lines.
- MX2: may be the top of the line, with an elongated shell, points at the rear and many smaller vents. Comes
with a visor.
- MK: toddler helmet with vents, inmolded as few toddler helmets are, nice bright colors and graphics. The
extra small size fits 45 to 52 cm (17.7 to 20.5 inches) heads. Retail is $25.
Mien Yow Industry
Mobo is the brand name of ASA Products helmet line with LED-powered
fiber optic rings around them providing light. We had first seen those on Hopus/Aegis helmets in the past. The Mobo
360 degrees LED Light Helmet
is a standard road model, inmolded with moderate vents and otherwise not exceptional,
but the retail price is very high at $119. We have not been impressed with the light output, although the ring effect is
cool. They also have a skate-style helmet for only $20, but without the LED ring. Mobo models fit heads 22.75 to 24.5
inches (57 to 62.5 cm)
Mongoose is a Pacific Cycle brand, so the helmets are not produced
by the same people who make the bicycles. The company is positioned as a supplier of a full line of bicycles and
accessories targeting the "extreme sports kid," a male between 7 and 17 years of age "driven by attitude." We have not
seen their helmet line for 2011 and do not have pricing for their models.
Netti is an Australian company that has been around since 1948
as a distributor of cycling goods. They say they are Australia's biggest manufacturer and distributor of bicycle clothing
and helmets. We have not seen their helmets in the US market for a long time, and we don't find the helmets any more on
their website, but do find some of them still on line, with prices below in Australian dollars. Netti models include:
- Transit: introduced in 2009, a city commuting style helmet with lots of vents and lots of styling pizzazz.
Inmolded and has bright red as well as white options. Comes with a visor.
- Soniq Carbon: has an elongated shape made longer by the big point in the rear. Has visible "carbon-style"
cloth reinforcements that Netti says are actually carbon fiber. $110 on line.
- Cyclone: inmolded with a two piece shell. Retail is AUS$100.
- Pegasus: elongated shape with high rear point. $70 on line.
- Lightning: elongated shape with a shelf across the rear. $40 on line.
- Fuse: elongated shape but with minimal rear shelf. Inmolded, bright colors available. $50 on line.
- Pangea: Upper and Lower glued on micro shell.
- Qantum Pro: Nicely rounded shape, two piece glued on shell with some bright color combinations.
- Trail: elongated shape, rear points. $60 on line.
- Jackal: Full face downhill racing or BMX helmet with small vents and bolted on visor.
- Invader: Full face for Down Hill & BMX, unvented ABS shell. The visor has two bolts.
- Instinct: Full face BMX-style helmet with a fiberglass shell and vents.
- Kaos: classic skate helmet with small vents (four in the rear) and ABS hard shell. Comes in visible
- Blade 2: Hard ABS shell, classic skate shape, but certified to the CPSC and AS2063 bicycle helmet standards,
- Minimax 3: Toddler model with heart-shaped vents and full shell cover. Comes in extra small. $40 on
- Pilot: Child/youth model with ring fit, bright graphics and AS2063 Certification. $40 on line.
In addition to their bicycles, Nishiki has a complementary line of clothing and accessories. They have two
helmet models, the Havasu
and the Takoma
. Both are inmolded, with rear snag points, the Havasu being the
better rounded model. They come in women's colors as well. Both are certified to the CPSC standard for the US market.
They retail for around $40.
Norin Development Company is a Chinese manufacturer supplying a wide line of bike helmets for other
brands. Their prices FOB China are typically from $2 to $12, translating to a US or European price in the $15 to $40
range. They have inmolded models, as well as taped on shells, ranging from elongated styles with points to more
up-to-date compact models that are sometimes nicely rounded. They have child, skate and light motorcycle hard shells. We
do not know what standards they normally design to. They can do custom designs.
Nutcase began its marketing with a single classic skate helmet
with ABS hard shell in many colorful and whimsical graphics designed to convince stubborn kids that wearing a helmet is
cool. Their Street
helmet is certified only to the CPSC bicycle helmet standard, not the ASTM skateboard standard,
despite the skateboarding label and the words "multi-sport" including skateboarding graphics on the box. Their product
literature also misquotes the title of the CPSC bicycle helmet standard and adds the word skateboard to it. We would not
recommend buying a helmet from any manufacturer who is that confused about standards. The retail price is $45 to $60 for
the models sold in bike shops. There are ear pads for winter riding, and an optional visor.
rated the Nutcase they tested Poor in their 2012 report on helmets
That generally designates a helmet that fails to pass impact testing at the CPSC level.
For 2013 Nutcase has informed us that they are moving on to a third generation design, upgrading their impact protection
and adding cooling channels inside. It will come with a removable visor. We would recommend waiting for that one if you
really want a Nutcase.
A shop specializing in large bikes for large people informs us that the Nutcase in L/XL fits many customers who have
large heads. The Nutcase site fitting chart says that size fits heads up to 64 cm (25"). Nutcase says their smaller
models fit round Asian heads well, but larger ones may not.
Nutcase has agreed to produce the Macinac Island community helmet
that was designed
as part of a community project.
Nutcase produces the Flex
for roller derby use, but sells it only to pro skaters and does not sell it in the US.
O2 helmets are being marketed in the US for the first time in
2013. The brand includes a full line:
- Dexter: a commuter model, round and smooth. Retail is $55.
- Storm: a road model with elongated shape and rear points. Retail is $90.
- Breeze: the value model in the line, less elongated than the Storm and with nicely recessed strap anchors as
well as strap adjustors that hold reasonably well. Retail is $30.
- Rush: a road model with elongated shape and rear points. Retail is $50.
- Roo: toddler model retailing for $28
- Carter: skate style model retailing for $30.
OGK is a Japanese company that marketed helmets in the US
back in the 1980's. They still produce bicycle helmets under the Kabuto brand for the Japanese market, and their English
website describes their line. It includes road, urban, kids, downhill and chrono helmets. All are certified to the Japan
Cycling Federation JCF standard. We don't know their pricing.
Oktos is a European company selling accessories and sunglasses as well as helmets. They sponsor racing teams. Their
helmets are made in China to the European CEN standard and marketed in Europe. Some are inmolded. They fit sizes 54 to 62
cm (21.3 to 24.4 inches). We have not seen their 2011 line. Prices on the US website are apparently all set at $135, but
the helmets can be found for much less on European sites. In the US, Oktos helmets are distributed by Persons-Majestic
- Altos: inmolded with a full cover shell, an elongated profile and moderate rear point.
- Destructor: inmolded with a full cover shell, an elongated profile and pronounced rear points.
- Protector: nicely rounded profile, inmolded.
- Pro Team: inmolded with a full cover shell, an elongated profile and moderate rear point.
- V17: nicely rounded profile, inmolded. There is a brightly colored flame option.
- V10: rounded profile, glued-on tapeless shell and bug net.
- V13 Trainer: a 2004 design with nicely rounded profile, glued-on tapeless shell and bug net.
- Quick Fly: a vented child's helmet with molded in visor and glued, tapeless shell, that comes in yellow with
a Dalmatian motif like Louis Garneau's old Felix.
- Kid: vented toddler helmet with bug net, meeting the CEN European standard.
- W10: inmolded with nicely rounded profile, lower shell, bug net.
- Agressor: BMX model with chinbar and a vented shell.
One Industries has a line of motocross and motorcycle helmets that
they have begun marketing for BMX use. They own the SixSixOne brand as well. Their models include:
- Gamma: a Snell-approved full face model with a fiberglass shell and dual density EPS liner. The chinbar has
expanded polyurethane energy management padding. Retail is $270.
- Atom: One's "value" helmet, with fiberglass shell and eps foam in the chinbar. Still has the dual-density
EPS liner to keep weight down. Retails for $170. Also comes as the Atom Youth at $100.
Orbea is an old and established Spanish bicycle manufacturer. In 2010 they
developed a line of helmets with distinctive styling with four models: Odin, Thor, Rune and Ari. All are road helmets
with large vents and rear points. Although press reports indicated they were bringing some of them to market with prices
ranging from $99 to $199, we have not seen them yet. Orbea's website has no standards information.
The Overade design is a folding helmet with a complex folding
mechanism to compact it for easy carrying. When folded it will be 1/3 of the unfolded size. You can see the folding
action in this video
. The Overade folds into a chunk
instead of flattening like most folders. The website says it will reach the European market in the spring of 2013, and
they are developing accessories to include a visor and rain cover. It would have to meet the CEN standard to be sold in
Europe, and the CPSC standard to be sold in the US. The retail price for pre-orders is $97 plus shipping if outside of
There is renewed interest in folding helmets since the shared bike rental programs are doing well in many cities. We have
a page up on folding helmets
with more info.
below, or Mongoose
Cycle owns the Schwinn brand. In 2009 they bought PTI, the former manufacturer of Schwinn brand helmets.
Poc is a Swedish company who entered the US bicycle market for the first
time in 2009. In mid-2012 they were bought by Black Diamond, known for its outdoor and ski equipment. Their other lines
include body armor, gloves and protective eyewear as well as ski helmets. Some of their helmets meet standards other than
the CPSC and CEN bicycle standards--check the sticker inside to be sure. Although bike standards all over the world have
eliminated penetration tests because epidemiology shows no penetration injuries, POC uses a double overlapping shell
construction on some of their models to ensure that there are no straight-through vents where a sharp object can
penetrate. This would inevitably reduce air flow, but POC remains concerned about preventing penetration by sharp
objects. We do not share that concern, but if you do and want at least some ventilation in a penetration-protective
helmet, the POC approach on their Flow models is unique. The helmet is molded in the thin inner shell, with a thicker
In 2011 Poc introduced two models that incorporate the MIPS anti-rotational injury design, with a slip-plane layer that
mitigates rotational force by sliding the outer layer over a Teflon-coated inner layer at the moment of impact. We have
more on that technology on our sliding resistance page
, or you can check it out on the MIPS website
. POC also began using a new magnetic Fidlock buckle.
In 2013 POC is rumored to be working on new road models, with hints on their web page describing the Tempor model below
as "a first step towards the Roadbike scene..."
Poc's models for this year include:
- Trabec: a conventional inmolded model with very good skate-style coverage in the rear and large rectangular
vents. It has a very large front visor, and is described as a mountain bike helmet. It has Aramid fiber reinforcing the
EPS liner. Comes in some bright colors, with the contrasting color on the rear section. This one does not have the MIPS system. Retail is $150. Also comes as the
Trabec Race with extra Aramid fiber reinforcing for $180. For 2012 POC added a version with the MIPS system, the
Trabec Race MIPS for $220.
- Receptor Backcountry MIPS: a skate style helmet with hard ABS outer shell, and a thin offset second shell of
polycarbonate, covering the Expanded PolyPropylene (EPP) multi-impact foam liner. The rectangular vents are offset
between shells to provide penetration protection, but ventilation is minimal. Under the outer vents the thin inner
shell is reinforced by Aramid patches. This one has the MIPS slip-plane system, and is a true multi-impact and
multi-sport helmet, although POC has no standards info up on it yet. Retail is $250.
Receptor +: Similar construction to the Backcountry, but without the MIPS system. Has the EPP multi-impact
liner. Can be equipped with ear covers for water use or an EVA cover to close the vent system for skiing. Now said to
be dual certified to ASTM F1492 as well as the CPSC standard, although we have not yet seen one with an ASTM sticker
inside. Retail is $220. There is an excellent in-depth review
of the Receptor on YouTube.
- Crane: new for 2013, a skate-style model that is inmolded with what POC says is a thicker thinshell (1 mm)
to avoid dents. Dual density liner. Larger vents than most other POC models. Retail is $120 beginning in the
- Receptor Flow: uses the outer shell of the Receptor + with an EPS (the industry standard) liner, so this one
would not be multi-impact. It has normal flow-through vents, but much smaller than the Trabec. POC says it works well
for longer head shapes by changing the fit pads. Retail is $80.
- Receptor Commuter: uses the outer shell of the Receptor + with an EPS (the industry standard) liner, so this
one would not be multi-impact. It has normal flow-through vents, with an inner thin polycarbonate shell protecting the
foam. Comes in visible white or black. This one does not have the MIPS system. Retail is $120.
- Tempor: introduced in 2012, a unique chrono model that flares out on the lower sides and has a long tail
that fits snugly to the neck and rises to curve over the shoulders. The object is to treat the cyclist as one body mass
rather than a separate head and body. Has two big vents in the front, and two very small rectangular vents in the rear,
but there are hints that "the vents might not be what you think they are." Comes in neon orange, black and white.
Retail is $380.
- Cortex DH MIPS: a BMX full face helmet constructed with the double shell. The outer shell is carbon fiber,
with the thin polycarbonate inner shell with a liner reinforced by Aramid patches behind the outer vents. EPP
multi-impact inner liner, an unusual feature in a full face helmet. But there is no energy management foam in the
chinbar. This model has the MIPS slip-plane design. Retails for a very high $500.
- Cortex Flow: Shaped like the Cortex DH but has open vents for more ventilation and a fiberglass shell rather
than carbon. It does not have the MIPS system. The liner is EPP for multi-impact. Retail is $250.
POC's XL models fit up to 62 cm heads.
Potenza is a brand of Seattle Bike Supply, a large distributor of bicycles and related products. Their
helmets have simple strap fittings, but they seem to hold well. These are not the same models sold by ProRider (below)
even though the two companies are in the same ZIP code. Pricing should be reasonable.
- Pantheon Pro: inmolded with an elongated but reasonably smooth shape with only one rear point. Comes in XXS
to XL, in red, silver and blue.
- Pavè (Pavè, not Pavé): a well-rounded, smooth design with reasonable vents and a taped
- Piccolo: a toddler model with the usual round, smooth taped on shell. It has minimal vents. Comes in blue,
pink and green with graphics.
ProRider is a supplier of BMX and bicycle helmets from China and is
also the home of the CNS (Children - N - Safety) National Helmet Program, selling directly to
schools and non-profit organizations
. Many of their helmets are Snell B95-certified in addition to meeting the CPSC
standard. Most of their models have the rounder, smoother shapes that we believe are best when you crash. Prices are very
low for the models with taped-on shells over plain white foam, in the under $10 range and sometimes as low as $4 each
including shipping when purchased in large quantities for a helmet program. For a dollar or two more you can get better
looking models that are more likely to be accepted by the kids than the white foam models. ProRider will also sell to
individuals at somewhat higher prices but still below $20 including shipping.
Pro Supergo is not affiliated with the Supergo bike shops in California or with the former Supergo
helmets from the 1970's. They have a line of inexpensive Asian-made helmets to complement their other bike accessories.
The website shows a number of models, including adult, child, BMX and skate style. Some are in EPU foam, some in EPS.
Some of the adult models are inmolded. We do not know what their retail pricing would be.
Pro-Tec was one of the original skate helmet companies in the 1970's,
and popularized the classic skateboard-style helmet with a round, smooth hard shell and small round vents. They still
sell nearly identical helmets to those old-school models. The company has changed hands at least twice since then, and in
2004 they brought out an almost completely revamped line, most of them much improved from earlier years. They began using
a foam they call SXP for some models that replaced the lower grade protection of prior years. Some models are
dual-certified to meet both the CPSC bicycle helmet standard and ASTM F1492 Skateboard requirements. If you want a
Pro-Tec, we suggest that you take a look at one of the dual-certified models. For 2013 most Pro-Tec models have at least
one bright color option, including white or neon yellow. In late 2012 the Pro-Tec brand was sold to Dye Precision, a
paintball company in San Diego. We don't know what additional plans they may have for 2013 changes.
Pro-Tec's SXP foam is a modified formulation of Expanded PolyPropylene (EPP), allowing them to upgrade their protection
while still meeting multiple impact tests without making the helmets thicker. It is a multi-impact foam, although it does
lose some performance with multiple hard hits in the same location. We have more comments on our
. Most Pro-Tec helmets look exactly the same on the outside, so you must find the standards sticker
inside and be very careful about the model you buy for bicycling.
Pro-Tec's models include:
- Riot Street: new for 2013, a classic Pro-Tec skate style helmet, but inmolded with an EPS liner and visor.
The usual small vents, but marketed as a commuter helmet. It has reflective material on both the strap and rear of the
helmet. Retail is $80.
- Cyphon: a hard shell bike helmet with round, smooth lines and extended rear coverage. Inmolded with ABS/PE
hard shell and normal vents. Has a visor. Retail is $110. This one is worth a look for the extended rear coverage with
bicycle helmet vents.
- Classic EPS: round and smooth, with small round vents and good coverage, the classic Pro-Tec design. Comes
in visible white and bright red as well as the standard dark colors. Certified only to the CPSC bike helmet standard,
not skateboard. Retails for $45. There is an outwardly similar Classic Skate and Classic Full Cut Skate that are
not certified to either the CPSC bicycle standard or the ASTM F1492 skateboard standard and therefore to be
B-2: another round and smooth design, but this time with oval vents, a rad departure for the skate crowd.
Dual certified to bicycle and skateboard standards, and you should find a sticker inside
confirming that. Comes in visible white as well as the standard dark colors. There is an XS size down to 51 cm/20.1
inches. Retails for $65. It is also available as the B2 2-Stage with a different liner, not certified to bike
or skateboard standards and therefore to be avoided. Retail is $50.
Ace SXP: An updated skateboard style helmet with larger oval vents and minor reshaping of the shell lines. It
still has a round and smooth shape, and an XS size down to 51 cm/20.1 inches. Dual
certified to bicycle and skateboard standards, and you should find a sticker inside confirming that. Retail is
$65.(Note that the outwardly similar Ace 2-Stage, sold for skating in skate shops rather than bicycling is not
certified to the CPSC or ASTM skateboard standards.) Retail is $50.
- Shovelhead 2: a BMX design with a full face chinbar, fiberglass shell and vents. It has a snap-in liner that
you can wash separately. Certified to the ASTM F1952 downhill standard, indicating better protection than a CPSC
helmet. Retails for $130.
Most Pro-Tec models fit heads from 53 to 60 cm (20.9 to 23.6 inches).
We were encouraged by the changes Pro-Tec made beginning in 2004, and glad to see that a number of the models noted above
are dual-certified to the CPSC bike standard and the ASTM F1492 skateboard standard. Check for the sticker inside the
helmet to be sure.
Proviz is a UK retailer of high-visibility bicycle gear, including
helmets. They announced in May, 2012 that they are bringing at least one of their helmets to the US market. Their Saturn
Hi Visibility model comes in neon yellow and has five LEDs in the visor. Unfortunately that means that to use the lights
you would have to use the visor at night when you probably don't need it. It is CPSC certified. They have other hi-viz
models, including one that is all black. It at least has the rear red LED light built into the fit ring of all of the
Proviz models. Most of their models are "Designed and built to CE EN 1078 safety standard" so we will not see them in the
US market. Retail prices in the UK run from 23 to 55 pounds and sometimes there are sales.
Prowell is a Taiwanese company producing a line of helmets in EPU foam
have a very interesting web page with an explanation of the foam and their technology. Most of their models are inmolded,
some with lower shells as well. They generally have a high quality appearance, seeming solid (and a bit heavy) in the
hand. There are 14 models in the line ranging from radical elongated styles with rear points to more rounded commuter
helmets and child models. They have a "Shark Fin" LED light designed to mount on top of a helmet and flash in all
directions. Most of Prowell's models should retail for about $25. The company manufactures helmets for other brands.
Pryme Protective Gear
Pryme is a brand of Seattle Bicycle Supply. The line includes helmets for BMX, downhill racing,
whitewater, snowboarding and skate use, most of them with catchy names. All come with three sets of fitting pads. They
fit heads from 52 to 62 cm.
- Pryme Evil: a full face downhill model meeting the ASTM F1952 downhill mountain bike racing standard, so it
is certified to be the most protective helmet in the Pryme line, much more protective than the Prime Evil Pro below.
Retail is $116.
- Pryme US Pro: a full face model for BMX and downhill racing. Hard shell, vents, bolted on visor. Meets only
the CPSC bicycle helmet standard.
- Pryme Evil Pro: a full face model for BMX and downhill racing, but meeting only the CPSC standard for
regular bicycling. Hard shell, minimal vents, bolted on visor. Retails for $105.
- Pryme US: a full face model for BMX and downhill racing. Hard shell, vents, bolted on visor and a cool skull
medallion on the chinbar. Retails for $90.
- Pryme AL: another full face model, with net-protected vents, fiberglass shell and a bolted on visor. Retail
- Pryme 8 V2: a classic skateboard style helmet. Has small vents and an EPS liner. Meets the CPSC standard.
Some bright colors are available. Retails for $40.
- Pryme 8 V2 Lite: a classic skateboard style helmet, but a thin shell that is inmolded. Has small vents and
an EPS liner. Meets the CPSC standard. Comes in some very bright colors. Retails for $60.
- Pryme Mortal: skate style helmet similar in shape to the Pryme 8 but with a skull logo insert replacing the
vents in the front and only four small ones in the top. Retail is $30. This one was discontinued at the end of 2012 and
is selling out.
- Pryme Vario: a snow helmet also certified to the ASTM snow sports standard and the CPSC bicycle helmet
standard. It has small vents.
Pryme has a useful sizing chart on their website.
Punisher is a brand of skateboards and skate
helmets. They have one model, a hard shell classic skate style helmet with small round vents in front and small oval
vents on the top. It is certified to the CPSC bicycle helmet standard, not to any skateboard standard. There is a visible
white option as well as the usual black. Fits heads from 53 to 57 cm. The retail price is $30.
Raskullz is the brand for a line of child and toddler helmets
with rubber animal ears and noses mounted on them. Some go beyond that. All of the projections are soft rubber, but some
have a harder core, and do not readily detach. See this page on sliding resistance
to see why we
think helmets that would not slide easily on pavement present a hazard, and do not recommend them. The packaging mentions
ASTM, but does not identify a specific ASTM standard, and the stickers inside the helmets state that they meet the CPSC
bicycle helmet standard and do not mention ASTM at all. Both the ASTM and CPSC child bicycle helmet standards outlaw
projections of more than 7mm that do not collapse or break away readily when tested. These collapse partly, but the
remaining lump is higher than 7mm. We were dismayed to see that Target is selling Raskullz to unsuspecting parents.
Reflectek was formerly produced by Kuji Sports
. There is one model with a fully
reflective shell and another with a partially reflective shell that is still available on Amazon for about $25. They are
reasonably rounded helmets with a glued-on shell, small point in the rear, adequate but not large vents and a ring fit
system. There was also an inmolded "Pro" model too with a partially reflective shell at $40 retail, probably more often
seen in bike shops. It has larger vents and a sharper rear point. The same reflective technology had once been used on
parts of two Ironman models as well. This photo probably overstates the reflectivity, but the contrast with the "normal"
helmets is made evident by the camera's flash.
We have comments and photos of one of the Reflectek helmets on our page on reflective helmets
REM is an Italian brand with a line of inmolded helmets. We don't see them in the US market. Some of their
models have vent "pipes" and some have double layer liners, with an upper cap inmolded and a less dense liner below.
There are air channels between the layers. We can't find their website any more, but the helmets are available online.
Roar Helmets come from Shang Yang Industrial Co. of Taiwan and Vietnam. They have a line of nicely made
CPSC-certified helmets, and their adult models are inmolded. Some have multiple shell pieces covering lower areas of the
helmet. Most have modest rear points and recessed strap anchors, and some are very well-rounded, notably the
. There are bright color options for each model. They have a unique strap fitting that tightens with a screw.
They should all retail in the $35 range. Roar has a child "designer's" helmet that they can customize with printing and
graphics for events or other needs. Sizes run from 52.3 cm (20.5") to 62 cm.
This European manufacturer markets sunglasses and sporting
attire from founder Rudy Barbazza. We are not sure which models you may find in which markets, but check their US web page
for the ones certified to the CPSC standard. All of the models listed
below are inmolded. Most have partially recessed or even embedded strap anchors and some have small reflective patches in
the rear. Their models have cam locking strap fittings that locked the strap very well. They are nice looking helmets,
most with bright color options including USA red, white and blue, and some Canadian graphics with maple leaves. We have
not seen the Rudy Project line for this year. Models include:
- Windmax: new for 2013, an elongated road model with a high rear shelf point, big vents and a lower shell
covering all foam. Has lots of visible "ultralight polymer fiber" reinforcement showing between the ribs. There is a
very visible neon yellow option. Comes with a microfiber pouch. Retail is $295.
- Sterling: an elongated road model with points front and rear, big vents and a lower shell covering all foam.
It has a unique "impact protection grid" reinforcing cage that is visible through the vents. There are no visible strap
anchors, a nice feature in a helmet that is inmolded. Also comes as the Sterling MTB with visor.
- Slinger: a very light compact style helmet certified to the CPSC standard.
- Actyum: an elongated road model with pronounced rear points and many vents.
- Zuma: road model with a two piece shell for full cover and the good cam lock strap fittings that hold well.
- Fyol: a youth model road helmet with somewhat smaller vents and a single rear point. It seems to be the
successor to the Snuggy youth model that had more rounded contours in front, or perhaps the Skud that has
a wedge shape coming to a single rear point.
- Jockey: a nicely rounded, well vented child helmet.
- Skyanto: hard shell classic skate style helmet certified to CPSC.
- Koyna: a full face BMX/downhill racing model with vented chinbar with mesh in the vents and a bolted on
- Wingspan: a chrono model with more complex lines and larger vents than most. Rudy Project provides mesh and
solid vent plugs. This is Erik Zabel's time trial helmet. One shell size. Neon orange. Retail is $325. The black
special edition Diamond model with Swarovski crystal highlights is $500.
- Syton Open: another chrono model with the same split tail but with no "wings" and smaller vents. Retails for
Rudy Project always has some interesting design innovations.
S-One Helmet Company has ABS hard shell classic skate helmet models. Some are
dual-certified to CPSC and ASTM F1492 skateboard standards, and some are not certified to any standard at all.
- Lifer: classic hard shell skate model dual certified to the CPSC bicycle helmet standard and the ASTM F-1492
Skateboard standard. It would be the clear choice among the S-One models for impact protection. Fits up to 23.5" heads
(59.7 cm). The similar Kid model, also dual-certified, fits heads as small as 18.5" (47 cm).
Big Head: classic hard shell skate model certified only to the CPSC bicycle helmet standard, not to the ASTM
skateboard standard. Fits heads up to 24.25" (61.6 cm), qualifying as a big head but falling short of those listed on
our Big Heads page. A dual-certified helmet would have to have a larger shell for this size
- Destro: classic hard shell skate model certified only to the CPSC bicycle helmet standard, not to the ASTM
skateboard standard. Has a "deep fit" that S-One says will keep it low on the head. That might mean better coverage
along the bottom. Retail is $50.
- Premium, OG: classic hard shell skate models not certified to any helmet standard. The S-One site says:
"Warning: The S-One Premium Helmet is not CPSC Certified. S-One recommends that all skaters wear a CPSC Certified
helmet regardless of age or skill. CPSC Certified helmets are up to 5x more protective than the non-certified helmets.
If you want the most protective helmet possible check out the helmets in the CPSC Certified section." If you insist on
non-certified, the retail price is $44. The similar CroMag fits heads up to 25.5" (64.8 cm). and retails for
S-One is to be applauded for their frankness about their non-certified helmets.
Sahn is located in Vancouver, and they list one dealer there. They have two models, one the Sahn
, an elegant skate-style helmet with a built-in hard shell visor and no vents. The second is the Chairman
, with a plastic eye shield in place of the visor. Retail at Walrus, a "contemporary lifestyle boutique," is $129
Canadian for either model.
Sawako Furuno is a London fashion designer with a line of cycle accessories and clothing who is
promoting a skate helmet model with an ABS hard shell and fashion covers. They include the Leopard
, one in
alligator skin and a number of others. They have small round vents and a visor. They come only in size medium to fit
heads 54 to 58cm. They are certified to the US CPSC standard. They are stocked now by some US women's design retailers,
at prices around $120 to $150, showing what the fashion industry can do to add value to a skate helmet. Here is a London site with more info
Seattle is a brand of Seattle Bike Supply. So far they are marketing just one model we have seen, their
road helmet with elongated shape and rear points. It is inmolded, with nicely recessed strap anchors and
unfortunately slippy strap adjustors. It retails for $50.
SDS / San Diego Speed
The Schwinn brand is now the property of Pacific Cycle USA. We usually
see them in big box stores or on the Internet at retailers like Amazon. They have some very inexpensive models, and some
better ones that can be fitted more easily starting under $20. Most of their adult models also have a "youth" size. We
can't find information about the line on the web any more, but at least two of their models have been rated highly by
Consumer Reports in the past:
- Thrasher: small point in the rear and recessed strap anchors. It is not inmolded, but uses glue to attach
the shell and boasts of "tapeless technology." Rated as a Best Buy by Consumer Reports in 2009. Retail is $25.
- Intercept: a youth helmet. The Intercept was the only youth helmet awarded the Consumer Reports
Best Buy tag in their June, 2006 article.
Scott is a high tech sporting goods company that grew out of the
invention of the first aluminum ski pole. They now produce many products, and have a line of bike helmets. Most of their
models are only certified to the European CEN standard, but the Spunto and Spartan below are CPSC. At least two of
Scott's models use dual-density "cone-head foam"
liners, a very interesting
technology. Most have bug net in the front vents. A number of the models have a Contessa version with ladies graphics.
- Taal: a compact road model with the most reasonably rounded rear treatment of any of Scott's models. It is
inmolded, and has a MIPS slip-plane built in that may help with rotational energy management.
- Watu: road model with lines very similar to the Taal, but this is Scott's "value" helmet at 40 British
- Groove II: elongated road model with rear points and many vents. Retail is 60 British pounds.
- Wit: new for 2013, a road/mountain helmet with rear points and many vents. Retail is about $135. The
Wit-R is the road model without visor.
- Karma: a "mountain" design with a very reasonably rounded contour except for a strange lump in the back and
very large vents. Inmolded, with a ring fit system. Retail is 75 British pounds. Retail is 75 British pounds, about
- Fuga: a road model, inmolded with a ring fit system and a reasonably rounded contour. Retail is 100 British
- Vanish Evo: Scott's entry in the ultra-light road helmet competition. Has two unfortunate and very sharp
rear-facing points. Inmolded and ring fit. Has dual-density foam using the cone-head design, accounting for some of the
lighter weight and possibly producing a softer landing helmet for lesser impacts. We don't have test results to confirm
it. Unfortunately, the Scott website speaks of "two different foams with their own characteristics of recovering from
impact" implying that the EPS recovers protection after an impact and could be used again, which is not the case. We
think they really mean two different foams with their own characteristics of managing impact energy. Has internal strap
anchors, eliminating any surface bumps, but so many points and angles all over the shell that strap anchors would not
make much difference. Also comes as the Vanish with visor.
- Spunto: a youth helmet with lots of vents and the same big rear points that dad has on his helmet. Certified
to the CPSC standard, so could be sold in the US. Retail is 40 euros, about $53.
- Scott Jibe: a classic skate helmet with a hard ABS shell and small vents. Meets the European CEN standard.
The strap junctions do not lock at all, probably not a big problem for a skate-style helmet.
- Spartan: downhill helmet in classic BMX shape with the classic BMX visor bolted on. Has an ABS shell. There
is no energy management foam in the chinbar. Meets the CPSC bike standard but is not certified to the tougher ASTM
F1952 downhill racing helmet standard. Has the standard BMX large bolted-on visor, always a potential snag hazard. Four
sizes fit 54 to 62 cm heads (21.3 to 24.4 inches). Retail for the DH is 225 British pounds.
- Split-TT: a compact chrono model with integrated face shield and flexible side pieces around the face to
facilitate putting it on. No front vents except slits at the top of the shield linking to internal channels. There are
very small rear vents. The strap adjustors hold reasonably well.
SE has a classic skate style helmet with a hard ABS shell to
complement their BMX and freestyle bikes. CPSC certified only. Retail is about $25.
Sector 9 has a line of classic skate-shaped helmets, with the Mosh
and the Logic CPSC
certified to the CPSC bicycle helmet standard, but not certified to the ASTM F-1492
skateboard standard. The website does not show any certification at all for the Mosh Pit SWT
and the Logic SWT,
with EVA foam, and it says ominously that neither is for sale in California. Prices are about $40, lower online. Sector
9's 2012 downhill helmet, the Downhill Div, is a full-face helmet with clear and tinted face shields. It meets only the
CPSC and European bicycle helmet standards, not the ASTM skateboard standard or the ASTM F1952 downhill mountain bike
racing standard, and is priced at $325. Sector 9 helmets come in many colors.
Selev is an Italian company with models made in Italy
mostly for the upscale road rider market. They obviously make an effort to produce unique-looking designs. Most of their
helmets are inmolded, and the more expensive they are, the more points you get on the rear. The website says they meet EN
1078, the European standard, and are all made in Italy. Their models include:
- Avatar: a 2011 model with many vents and points in the rear, certified only to the CEN standard.
- Zenith: a newer compact model with squared-off rear and no points making for a nicely rounded profile. Worth
a look for that alone. Reasonable vents.
- Matrix: inmolded with a large rear point, four piece full shell, angular lines with ridges, brow vent
reminiscent of the Specialized Cobra models, lots of vents and a click-slide tab rear stabilizer. Comes in regular
colors including visible white or team colors that can be customized for different combinations. Some versions of this
model have bug net in the vents. All have reflective spots on the rear stabilizer, a good location for those who ride
in the bent-over position.
- Mito: elongated shape, points in rear, visor.
- Blitz: a more compact design but still has many small points on the rear and one on top in the front. There
are white and bright color options.
- Nitro: another compact design with only one rear point. Some bright color choices.
- Alien: inmolded with a really pronounced rear overhang and points, lots of longitudinal vents and partially
recessed strap anchors.
- Tempo: Selev's chrono model with a full lower cover that comes all the way down to the neck. Meets the EN
1078 standard. Has an internal radio wire channel. Fits sizes 54 to 59 cm. (21.6 to 23.2 inches).
Seven 20 is a skate brand. The ones we have seen are certified only to a European standard, EN 1385 -
Helmets for canoeing and whitewater sports, not the CEN bike standard. Retail is about $25, but we have seen them at
Sports Authority and Modell's for $15. The one we saw is not recommended for bicycle riding because it is not certified
to the CPSC standard or even the European bicycle helmet standard. Not recommended for skateboarding either because it is
not certified to the ASTM F1492 skateboard standard.
Shain (pronounced "shine") is an established Italian brand that was introduced to the US market in 2004. Their
website says their helmets are "100% made in Italy." It also says it presents their "new" 2009 bike helmet collection, so
our info may be way out of date.
After introducing a new foam in 2005, Shain cut back on its use until by 2009 all of the Shain models were the standard
EPS foam versions. Most are advertised as meeting the US CPSC standard, but we don't see them in the US market. The line
is beginning to look dated, with elongated helmets with sharp rear points.
Shain has another wrinkle as well, supported by data published in their catalog. They have added an inner shell to some
of their standard EPS helmets, and claim that it permits EPS to withstand two hits in the same spot. Inner shells are not
a new idea--the Bailen Bike Bucket had one 25 years ago and Louis Garneau and others have had them for years--but Shain
is the first to claim that they can meet standards with two hits at the same spot due to the inner shell. The data in the
catalog shows the g's rising from 137 to 213 on the second drop, and then to 367 g on the third drop. Most people in the
helmet industry consider 213 high, and likely to cause a concussion, and anything over 300 g will not pass the US
standard. So we would not describe that as multi impact performance.
Shain helmets have some European features like bug net in the forward vents on some models. All are inmolded except the
toddler helmet. They have the best strap fittings we have seen, the Duraflex 2, holding their setting despite any
combination of pulling and tugging we could devise. They also have reflective logos, a feature we appreciate even though
the logos are too small to add much to the cyclist's visibility at night. The line includes:
- BK 100 : the top of Shain's road line, an inmolded model, with plenty of vents and plenty of points both in
the rear and projecting up and forward from the front surface. Updated in 2005 with their new foam. The shell wraps
under and there is an inner shell for full coverage. The strap anchors stick up entirely above the shell, adding
another potential point. There is a mountain model with visor, one in Olympic colors, and the BK100
Bianco/Carbon with "carbon look" inserts.
- BK 90 Ora: another high-end inmolded design with a pointy rear point and external strap anchors. It has the
inner shell. It has metal bug screen in the vents. CPSC certified. There is also a mountain model with visor.
- BK 40: rounded exterior except for a modest rear point and a molded in visor lip. Inmolded. This one also
comes in visor and the woman's Lady version.
- BK 500: Shain's chrono time trial model is actually an EPS foam helmet liner with an additional fairing
added on the exterior and a clear face shield. There are three small front vents, five in all. Certified only to the
CEN standard. Not in the current catalog.
- BK 11: Toddler helmet with vents. Taped on shell. CPSC certification.
Shain will replace a damaged helmet "at a substantially reduced cost to the original owner."
Shaun White Supply Co
Shaun White Supply Co is a D-6 brand for skateboards and trick scooters and accessories. They
have a classic skate-style helmet with a hard shell and small vents. It comes in black or white, and the corporate logo
on the front just says Supply Co. Retail is $30.
SH + is an Italian company with a full line of bike helmets, some made in
Italy and others imported from China. Most of their helmets are only certified to the European CE standard, but some may
meet CPSC for sale in the US. Most road model have large vents and rear points. They have an anti-pinch buckle that is
backed by a tab. There is a skate style model, as well as long tail and round chrono helmets, and downhill racing full
face models. Retail prices ranges from 24 to 160 euros.
Shenzhen Baojiali Sport Equipment
Shenzhen Baojiali is a Hong Kong company with a full line of bicycle helmets. They
have road, children's and skateboard helmets in many styles. Most are EN 1078 certified for the European market and some
are CPSC certified for sale in the US. Some models are inmolded. Prices in the US should be in the range of $10 to $40
Shenzhen Hezhen Bicycle Inc.
A Chinese manufacturer located in Shenzhen. We have not seen their line, but they have
informed us that they produce 15 models, including some BMX style with fiberglass shells and some rated as bicycle/skate
helmets. They say they export to 20 countries, including the US, but we don't know what brands they manufacture for.
Shenzhen Qukang Industry Development
Although we have not seen their 2010 line, this Taiwanese manufacturer makes
both EPS and EPU helmets. Their EPU helmets are inmolded. The styles are well-rounded, but vents look small. They have a
fiberglass BMX model. We don't have current pricing. You would be most likely to see their helmets with other brands on
SixSixOne is primarily a BMX and skate equipment company with a
racing slant, owned by One Industries. They have bicycle, BMX/Downhill and skate style models in their line. They seem to
have many dealers in the UK.
- Recon: an interesting model that added some styling interest to the round and smooth commuter look, with
extended coverage in the rear and reasonable vents. The visor can be easily removed and is designed to pop off in a
crash. Choice of black or white. Retail is $100. Worth a look for the additional coverage with what appears to be
- Comp II: a vented downhill model with a smooth, round polycarbonate shell and bolted on visor. Meets only
the CPSC standard, not the ASTM downhill mountain bike helmet standard. Retails for $80
- Evolution: a vented downhill model with a fiberglass shell and bolted on visor, rear lump sticking up to
spoil the profile, retailing for $170.
- Evolution Carbon: a full-face BMX model with vents, with visible carbon fiber in the shell and a lump in the
rear, retailing for $300.
- Dirt Lid: a skate helmet in the classic round, smooth design with round vents and ABS hard shell, retailing
for $28. It meets only the CPSC and ASTM bicycle helmet standards, not skateboard.
Smart helmets come from Shunde Smart Helmet Co in China. They
supply helmets for other brands. Most of their helmet models have the elongated shape with many vents and points in the
rear, but a few are nicely rounded. Some are inmolded, some taped on. There are kids and skate models as well. We don't
have their retail pricing.
Smith Optics has been known for eye protection and helmets for
snowboarding and skiing. They have announced that they will be launching a new bicycle helmet line in 2014. They will
have liners using a honeycomb of collapsing plastic tubes rather than EPS for energy management. You can see the material
on the Koroyd site
. It is similar to Cascade's Seven liner system
for lacrosse helmets. Three models are planned, ranging from $50
to $220 retail. They are to be available in the spring. Here is an article in Bicycle
Retailer and Industry News
Specialized is one of the major U.S. helmet manufacturers sold
through bike shops and is a supplier of a wide range of bicycles and components. All of their bicycle-style helmets are
inmolded. They have the straps in two models attached directly to the interior reinforcing, eliminating the external
strap anchor bumps found on some high-end helmets. Other anchors are recessed. They also have a "U Turn" strap junction
piece with a flip tab lock that they say will eliminate strap creep, but did not function that well in our random pulls
on some models.
In 2012 Specialized introduced their Tri-Fix fitting system, with the strap junctions fixed like Bell's True Fit. It
lacks the special cage that makes True Fit work, and does not function well for this reviewer, but works better on some
other heads. Since you can't adjust the junctions, we would not buy a helmet with Tri-Fix unless you try it on first to
see if it works for your head. Since current Specialized models are only available in bike stores, that's a given.
All of Specialized's models are ring fit. Several of the models below are available in a women's color scheme. Some have
a new strap junction that curves to fit the jaw. In addition to the CPSC standard, Specialized models are certified to
Snell's older B-90 bicycle helmet standard, very similar to CPSC, and the Deviant models to the Snell B-95 standard,
somewhat tougher than CPSC. (Specialized is the only major US bike helmet brand still using Snell certification.) They
have also certified the Dissident, Deviant and Deviant Carbon to the ASTM downhill mountain biking standard, F1952. That
standard requires better impact performance and coverage than the CPSC standard.
- S-Works Prevail: the S-Works series has been a major Specialized project pushing technology to produce a
lighter helmet. We regard weight reduction as misplaced effort, but it may sell helmets and may appeal to you. The
Prevail is inmolded with a four piece shell for full coverage. It has a large rear point despite the overall compact
shape. Designed with a dual-density foam liner to cut weight, it has huge vents and Kevlar inner reinforcement. It has
extra-light polyester strap material that the manufacturer says is hydrophobic and will not stretch when you sweat on
it, a worthwhile advance. And it has a drilled-out buckle to save a gram or two of plastic, not a worthwhile advance.
It has the new non-adjustable strap junctions. Sewing the junction saves weight and simplifies fit as long as it works
for you, but check to see if it fits before buying. This model will be available in Europe, where it can be lighter and
still meet the CEN standard, and in Japan, where the fit will have to be adjusted for Asian heads. Can be had in
visible white and bright red. Retail is $230.
There are now six S-Works models available on the Specialized website. The S3MT is the older design with
multiple rear points, a larger visor and no carbon, retailing for $150. Older S-Works models from 2008 and 2009 are
offered at discounts in the Specials section.
- Street Smart: urban design that looks like a round, smooth skate-style helmet with added design details for
style and reasonable vents for a city helmet. inmolded. There are small reflective tape surfaces on the rear, and a removable visor.
All colors are matte, but the white is visible. Retail is $60.
- Propero II: profile looks almost exactly like the S-Works Prevail above, but has a two piece shell, and
there is more foam in the form of smaller vents and thicker bridges breaking up the largest ones. Has almost all of the
other light weight features, including the hydrophobic no-stretch straps. Retail is $100. Visible white and some bright
colors are available as well as a reflective black, and there is some reflective surface on both black and white
- Vice: full coverage shell and very large vents. It appears to have increased coverage in the rear. It has a
compact shape without rear points. As a style gimmick, Specialized has bolted the visor on in Troy Lee BMX style. We
would avoid that. It retails for $80.
- Tactic II: full coverage shell and compact shape, but retains a small high shelf point in the rear. Vents
are a little smaller than the Vice, so it has more foam. It retails for $65. The women's Adorra model has a
larger pony tail port.
- Echelon II: has a three piece shell, but many areas of exposed foam with no shell at all. We would avoid it
for that reason. It has the newer compact shape, but retains some rear points. It retails for $60. The women's
Aspire model has a larger pony tail port.
- Align: Specialized's value model, retailing for $40. At that price it still is inmolded and has the
trademark brow port. It has a compact profile with a minimal rear point, and comes in three shell sizes, with a ring
fit system. Has reflective strips on the sides of the straps, and black reflective tape in the rear. Also available as
the Sierra for women and the Flash for children. Comes in XXL as the Max fitting heads 62 to 64 cm
(22 to 25.2") Specialized has a Japanese version of this helmet called the Contour to fit rounder Asian heads.
It probably does not meet the CPSC standard, since helmets sold in Japan are normally certified to the Japan Cycling
Federation JCF standard and the European CE standard.
- Small Fry: a classic round, smooth toddler and child size helmet, but inmolded and has some vents. Ring fit,
bug net in front vents. Has some reflective patches. The smallest size is the toddler model advertised to fit 44-52 cm
(17.25-20.5"). Retail is $40.
- Covert: introduced in 2012, a classic skate-style helmet with ABS hard shell and CPSC bike helmet
certification, not ASTM F1492 skateboard. Has the new Tri-Fix fit system, so try it on before buying to make sure it
will work for your head. For 2013 there is a visible white option. Retail is $40.
- Dissident: introduced in 2012, a full-face downhill racing helmet with few vents and a carbon
fiber/Kevlar/fiberglass shell. Certified to the ASTM F1952 Downhill Mountain Bike Racing standard and the ASTM F2032
BMX bike helmet standard, tougher than the CPSC standard. That makes this one worth a look. There is some energy
management padding in the chinbar. Has provision for using a neck brace, and is compatible with the EJECT system used
by EMT personnel at events to help get helmets off without straining the neck. (The side pads can be removed by pulling
a tab marked with the EMT logo.) The large BMX-style visor is bolted on with plastic bolts designed to break away when
you snag it on something. Retail is $350.
- Deviant II: full-face downhill racing helmet with a fiberglass shell and decent vents. There is bug net in
the vents. Certified to the ASTM downhill mountain biking standard, F1952, tougher than the CPSC standard. Look for the
sticker inside to be sure. That makes this one worth a look. Retail is $140.
- S-Works TT2: a long tail chrono model. Has one large brow vent in the front in Specialized style, and four
large rear vents on the tail. The tail is open underneath. Has non-stretching straps. Two sizes fit 52 to 61 cm (20.5
to 24") heads. Retail is $250. Specialized has other chrono models not available through retail, and sometimes only CEN
certified for European racing. They include the TT1, TT3 and TT4. The TT4 is new for 2013, with
aerodynamics technology contributed by McLaren. It is a very expensive limited edition model with multiple very narrow
"gill" vents on the top and sides that Specialized says improve the aerodynamics.
Most Specialized models fit 51 to 63 cm (20.0 to 24.8") heads. The Max fits up to 64 cm (25.5") heads.
Specialized sometimes has older models of their helmets on their website's sale page at reduced prices, but never any of
the current year's models, available only through bike shops.
Specialized sells replacement pads and visors on their website for many of their models.
Specialized will provide a 20% discount voucher for any crashed helmet, but requires proof of purchase and may substitute
another helmet if the one that was crashed is no longer available.
Spiuk is a Spanish supplier of a wide range of bicycles, components and
clothing. (The name is pronounced spee-yuke.) They have some bright color combinations on most models including team
graphics. Strap anchors are nicely recessed. Pricing is from 2010, not this year. Their models include:
- Synergis: a compact design with one pronounced rear point. Inmolded with a full coverage shell and some
carbon fiber reinforcements. Visor. Meets the CPSC standard. Retails for $170.
- Daggon: elongated shape with medium rear points. Inmolded with full coverage. Has some carbon fiber
reinforcements. Comes with bug net the user can install if wanted, and a case. Meets the CPSC standard. Retail is
- Kowter: inmolded with a single shell. Compact shape but still has one shelf-like rear point. Meets the CPSC
standard. Retails for $65.
- Nexion: inmolded with large front vents, a full shell on the lower portion, and pointy rear points. Worn in
competition by teams supplied by Spiuk, comes in team colors or world champion stripes. Meets the CPSC standard. Retail
- Zirion: inmolded with a very large point on the rear. Ring fit, visor. Meets the CPSC standard. $85 retail,
including the team graphics model.
- Gothic: a classic skate design with small vents and some sculpting of the exterior lines. No bright colors.
Meets the CPSC standard. Retail is $40.
- Casco Kids/Casco de nino: a toddler helmet with vents and nice graphics. Meets only the CEN European
standard, so will not be sold in the US.
- Kronos: a time trial teardrop shape with two small front vents and a center rear vent through the long tail.
Inmolded. Ring fit. Meets the US CPSC bicycle helmet standard. Retail is $235. The photo on the website shows the tail
flying in the breeze, not a very aerodynamic position.
In some cases Spiuk will replace crashed helmets at a discount.
Star Helmets (Zhuhai Star Sports Equipment), located in Zhuhai, China,
produces an extensive line of helmets under the Star Sport brand. Most are inmolded, the rest have taped on or glued on
shells. Their B3-11
model is well vented, round and smooth. Most of the rest have rear points. Some are only CEN
certified, but others are certified to CPSC and fourteen appear on Snell's B-95 bicycle helmet certification list,
indicating better than CPSC impact protection. Star seems to be moving more toward the high end of their line. Most
should sell in the $20 to $50 range in the US market, with the BMX models around $65 and ski models probably in the same
Stash was a folding helmet designed to be stored in a smaller space than a standard helmet, useful for riders
using shared use bicycle programs. It folded like the 1990's Motorika and the 2012 Biologic
, a hard shell model that folds the same way. The Stash had a hard outer partial shell of ABS. Aside from the
bare foam sections, the shape was round and smooth. Both sides folded into the middle to store it compactly.
The manufacturer of the Stash, Hatpac Ltd. of the UK,
said it met the CEN EN 1078 European bike helmet standard. If it did, it would be roughly equivalent to any one-piece
Euro helmet. At an advertised 300 to 330 grams (about 12 oz.) it would be about a third heavier than a standard
thin-shell CEN helmet, but that should not make much difference to any rider, particularly for short trips in town. Since
we have never seen any mention of testing to the US CPSC standard, this one probably could not have been sold in the US.
The typical CEN standard helmet does not meet our more severe impact tests. The Stash had protruding lumps for the hinges
that might not pass our limits on protrusions as well. Although their web description of lab test results had indicated
the author had some serious confusion about helmet testing, this was a really innovative design that might well encourage
people using bikes in town to wear a helmet, particularly those who regularly borrow or rent a bike for short rides. Came
with a pouch, and the company had shoulder bags and backpacks with special Stash compartments. Came in visible white with
chrome trim, as a commuter helmet should, as well as invisible black. The two sizes fitted heads from 55 to 58 (21.7 to
22.8") and 60 to 62 cm (23.6 to 24.4"). The Stash retailed in the UK market for 50 pounds ($75) or less if you can find
it now. We found it once in the Netherlands for 73.5 euros ($102). The Stash web page disappeared in 2010, and Hatpac is
similarly difficult to find. We don't think the helmet is still available.
Strategic Sports designs and produces helmets for
a number of U.S. and European companies with the other company's brand, and they rank among the world's largest helmet
producers, with annual sales in the millions of helmets. Ten of their helmets appear on
. They are the prime licensee of the Cone-head dual density foam
. We have comments on Strategic models under a number of other brands in this review, but you are not likely to
see a Strategic Sports brand name, since they avoid publicity.
Taizhou Vista Sports Goods
Taizhou Vista is a Chinese supplier of helmets
for other brands. They have 65 bike helmet models on the web, most of them elongated models with many vents and points in
the rear. Some are inmolded, some taped on. There are kids and skate models as well. We don't have their retail pricing.
Once a producer of skate-style helmets using a rate-sensitive
foam they called Zorbium, Team Wendy withdrew to specialize in military helmets and helmet liners for a decade. They were
planning to return to the skate or bike helmet market again in 2013, beginning with a carbon shell skate helmet with
thermoplastic urethane (TPU) deformable plastic forming the liner. They had expected to certify the helmet to multiple
standards. But in the spring of 2013 the plans had apparently been delayed or shelved, and We do not know when it might
actually arrive on the market.
THE, an Enterprise founded by Toby Henderson, has
mountain bike fenders, saddles and other accessories. The company provides helmets to Vigor Sports, where Henderson was
one of the founding partners. Their F-14 model was the first rounder, smoother model with style and really good rear
coverage to catch our eye, finally reaching the market in mid-2007. It has now been replaced by the F-20
similar helmet with bigger vents and unfortunate rear points in the form of an added-on "air deflector." THE also has two
full face helmets and a very round and smooth skate helmet with an ABS hard shell. They produce a road model with the
brand with a rounded profile, many vents and what looks to be extended rear coverage.
Top Gear is the house brand for Helmets R Us, a bulk supplier of
many models of inexpensive helmets to helmet promotion campaigns. Prices start at $3.65, including shipping for orders
over 24. They also sell single helmets retail to individuals at about $18 to $25 per helmet including shipping in the
continental US. Their Model 18
skate style helmet is dual certified to the CPSC bicycle standard and ASTM F1492
skateboard standard for $25 single quantity.
Triple Eight is primarily a skate and ski helmet company. We have not
seen their helmets, but their website shows a single skate-style model with a choice of liner materials under the
Brainsaver logo. They have a Helmet Chooser page that makes it clear which models are CPSC certified, but for the skate
models they don't say what if any standard they meet. There is no mention on the website of the ASTM F1492 skateboard
standard. Some models have rubberized finishes. We don't recommend those because they are likely to increase a helmet's
sliding resistance in a crash. They do have some nice bright colors, including white. They also have a Wipeout Dry Erase
model that kids can doodle on with dry erase markers. Their major innovation is a Sweatsaver Liner, claimed to manage
sweat effectively. It has a terrycloth interface with the head, moisture wicking layers and anti-bacterial treatment.
Retail prices are $36 to $40.
In January of 2012 CPSC announced a recall of Triple8 "Little Tricky" models
. The helmets failed
to meet CPSC impact requirements.
Troy Lee is a motorcycle helmet and gear manufacturer
with a BMX line known for high quality rad graphics. They originated the large bolted-on visor style with rigid mount
that adds a potential snag point and has become universal on BMX models. Troy Lee says that the plastic mounts in the
helmet will pull out when the visor is snagged. Unfortunately there is no standard for testing that yet, and nobody will
do it for you at the bike shop or bike show, either, so we still regard the visors as potential problems. The Troy Lee
bicycle line is named D2 for Daytona 2 and has three models.
- D2 Carbon: a classic BMX/motorcycle model with a shell made of 60% carbon fiber, 20% Aramid and 20%
fiberglass. Has titanium visor screws to hold on that big visor. The carbon has exposed carbon fiber mesh in a sunken
rear section they term "cosmetic," a style quirk but probably not a serious hazard. Four small vents. Meets the ASTM
F1952 downhill racing helmet standard and the ASTM BMX cycling standard, easily exceeding the CPSC standard. Strong and
durable D-ring buckle. Retail is $450.
- 2010 D2 Composite: another classic BMX/motorcycle model, this time with a shell made of 50% fiberglass, 20%
Aramid and 30% carbon replacing the Kevlar in previous models. Four small vents. Meets the ASTM F1952 downhill racing
helmet standard and the ASTM BMX cycling standard, easily exceeding the CPSC standard. Comes in somewhat more visible
gold. Strong and durable D-ring buckle. The D2 fits heads from 53 to 62 cm (21 to 24.5 inches). Retail is $295.
Troy Lee also has an "advanced" D3 model that has energy management padding in the chinbar. We don't know the
thickness or composition, but that might be a significant improvement.
There are custom sizing kits available for D2 and D3 helmets. Troy Lee will replace helmet liners after a crash if the
shell is not damaged.
This Swiss company sells mostly skate helmets in the
US in the classic skate style, one road model and one BMX model. For 2013 the models below are all certified to EN 1078
and US CPSC standards, but not to the ASTM F1492 skateboard standard. TSG's models include:
- Substance 2.0: new for 2013, TSG's only road model, with a very nicely rounded exterior and many vents.
Inmolded. There is bug mesh in the front vents. Available in visible white for urban use as well as black. Comes with a
visor. Worth a look for the profile.
- Kraken: a classic skate model with ABS hard shell and EPS liner. But the liner is in sections, linked by a
mesh, and TSG says the segments flex and enable the helmet to conform to unusual head shapes better. That is similar to
the old Sportscope design. TSG says the improved fit permits a thinner helmet and better ventilation, even though the
helmet has only 14 very small vents. They also say this model has protection extended lower on the head than others,
but we can't verify that. Certified to the CPSC and EN1078 bicycle standards, but not the ASTM F1492 skateboard
standard. Available only in flat black. The retail price is $38.
- Kraken+: new for 2013, the Kraken+ is the helmet described above but with the addition of MIPS technology to
add an internal plastic cage against the head with a slip-plane that will permit the helmet to slip sideways easily on
impact for a few millimeters. MIPS believes this will lower the risk of concussion. If the helmet couples closely
enough with your head so that it can not slip a few millimeters on impact, they could be right. When we tried it the
slip-plane did not make the helmet move any more than it would normally move in a sideways hit.
- Superlight: classic skate shape and few vents, but with a thin shell instead of a hard shell. Inmolded with
an inward curve in the lower shell. Comes in visible white as well as dark colors. Meets the European CEN bicycle
helmet standard and the US CPSC bike helmet standard, but not the ASTM F1492 skateboard standard. Retail is $70 to
- Summit: classic skate shape and few vents, but with a thin shell instead of a hard shell.
- Nipper: classic skate shape, but a thin shell design certified to CPSC. Sized for kids with 48 cm to 52 cm
heads (18.9 to 20.5 inches). Retail is $38.
Evolution: almost the same skate model as the Superlight, with small rectangular vents and an ABS plastic hard
shell. Meets the CPSC bicycle standard. Available in many solid colors and graphic schemes, including neon orange,
lime yellow and women's graphics. There is a "rubber finish" model that we would avoid as a novelty that may not
slide as well on pavement as the regular ABS shells do. A new graphic effect called "colored clear" uses transparent
or semi-transparent shells, and some bright colors were added for 2010. Retail is $45 or $55 for graphic models. Also
comes with different graphics in XXL size fitting up to 60.5 cm (23.8 inches) at $50, and a youth model. A plainer
version is the All Terrain in solid colors. There is even a wakeboarding model with ear flaps. There is also a "Stay
Strong" version commemorating and supporting paralyzed BMXer Stephen
- Skate/BMX: a classic ABS plastic hard shell skate design with one less vent than the Evolution. Colors
include visible white. Retail is $30. This one is available in a matched set in cobalt blue that includes a helmet and
protective pads for skate park rental programs.
- Nipper Maxi: classic skate style model with thin shell, inmolded, fitting heads as small as 52 cm (20.5
inches). There is a toddler model called the Nipper Mini for 48 to 51 cm heads.
- Staten/Staten Carbon: classic BMX/motorcycle style helmets with chinbar and a big visor. Fiberglass or
carbon hard shell with vents. Certified to the Snell B-95 bicycle helmet standard, exceeding the CPSC standard. Retail
price is $120 for fiberglass and $300 for the carbon.
TSG's skate helmets fit heads from 54 to 60 cm. Their full-face helmets fit heads from 56 to 61 cm.
Tung I Hsing
See Tung Kuang below.
Tung Kuang / Tong Ho Hsing (THH or TKLI)
TKLI sends its line to the U.S. through Trans National Trading Company of
Vernon, California. In China they are known as Shanghai Tung Kuang, or in Taiwan as Tung Kuang I Light Industry Co. Ltd.,
appearing on the Snell certification list as Tung Kuang I. They market their own Alltop and Allpro brands, but also
produce helmets for other companies under different brand names. Their EPS models are probably all made in China and
mostly have taped-on shells, while the EPP models noted below would more likely come from Taiwan and are all inmolded.
Most of their designs feature the round, smooth shapes that we prefer, but some of the models have vents that we would
find too small for summer use in the US. Most of the models below are on Snell's B-95 list, denoting somewhat better
protection than CPSC-only models. We have not seen their line or pricing this year. Previously their models included:
- T-91: replacing an older T-91, this 2006 model is a newer style bicycle helmet, inmolded with EPS foam, with
a reduced rear point and external strap anchors. Not on Snell's list. Some bright colors. Retail is $35.
- T-38: a nicely rounded design with moderate vents and visor. Bright graphics. Snell B-95 certified. Taped on
shell, visor. Retail should be about $16.
- T-37: a generally rounded but somewhat elongated design with moderate vents. Dark colors and red. Snell B-95
certified. Taped on shell. Retail should be about $16.
- T-36: a nicely rounded design with smaller vents and visor. Has three vents in front, three in the top and
only one in the rear. Available in a bright yellow. Taped shell, visor. Snell B-95 certified. Retail should be about
- T-35: a nicely rounded design with fewer vents. Some bright colors available. Snell B-95 certified. Taped on
shell. Retail should be about $12.
- T-29 : toddler helmet with small vents, very round and smooth. Available in orange. Taped on shell. Snell
B-95 certified. Comes in XXXXS size (usually xxs), fitting heads as small as 46 cm (18.11 inches). Should retail for
- T-22: smaller vents, updated graphics. EPU foam (heavier than EPS, has a solid feel and very uniform cell
structure), visor, dial fit system. Elongated shape but without a sharp rear point. Inmolded as most EPU helmets are.
Snell B-95 certified. Retail about $13.
- T-21: Smaller vents, EPU foam, some bright graphics, visor. Inmolded. Snell B-95 certified. Retail should be
- T-40: Downhill racing helmet with chinbar and an ABS shell. Some bright colors, including all white. Bolted
- T-39: Downhill racing helmet with chinbar. ABS shell, bolted on visor, vents. Retail is around $65.
- AP-866: motorcycle-style BMX/downhill helmet with full chinbar and polycarbonate shell. A nice visible
orange is an option. No vents. Certified to the DOT motorcycle helmet standard.
- AP-87: motorcycle-style BMX/downhill helmet with full chinbar and polycarbonate shell. No vents. Snell
- AP-89: motorcycle-style BMX/downhill helmet with full chinbar and carbon fiber-Kevlar shell. No front vents.
- TA-78: classic ABS hard shell skate helmet with standard dark colors plus white, pink and flame graphics.
Has a little sculpted line and two unexplained snaps in front, probably for a visor. No vents, so it looks more like a
ski helmet than a skate helmet. We don't know what standards it may meet, so it may not be certified for bike riding or
skateboarding. Comes in an extra small size.
- TA-77: classic skate helmet with standard dark colors plus some impressive gold, silver and
stars-and-stripes colors rarely seen in skate style helmets. Smooth, round ABS hard shell with small vents. We don't
know what standards it may meet, so it may not be certified for bike riding or skateboarding.
TKLI also produces helmets for other uses, including military, baseball, motorcycle, equestrian, football and snow
Urge entered the US market in 2011 with a line of bicycle helmets that
are environmentally sensitive and in some cases linked to green causes in other countries. They contribute one percent of
their profits to environmental causes. Some models use recycled EPS, and all have straps of recycled PET. All models are
certified to CPSC for the US and the CEN EN 1078 standard for Europe. The line includes:
- Endur-O-Matic: skate-style profile, but molded in the thin shell with 8 larger vents. Still has the extended
skate coverage in the rear, and a visor that is made with soft material to prevent it from snagging. The visor also
directs air to the vents. Some bright colors available. Retail is $100.
- Down-O-Matic: a full face downhill racing model with an unusual shape that has shoulders below the crown.
Round vents. Still only CPSC and CEN-certified. Retail in fiberglass is $200. There is another model called the
Down-O-Matic Veggie Lin using an environmentally-friendly linen fabric in the shell in development for mid-2011.
It retails for $250.
- Dirt-O-Matic : classic hard shell skate style helmet with small round vents and a unique visor that clips
in. Retail is $40.
- Archi Enduro: Pitched as the first enduro event helmet, a full face model with round vents, visor and a very
narrow chin piece. Retail is $170.
- Activist: new for 2013, a classic hard shell skate style helmet with small round vents. It is made with
recycled EPS and an unpainted, dyed ABS shell. Urge calls this their "entry level" helmet, but the one that goes
furthest in environmentally appropriate materials. The packaging is plain brown cardboard, and when possible they avoid
the plastic bags and tags that end up in the trash.
Urge helmets fit sizes from 54 to 61 cm (21.3 to 24.0 inches)
Uvex is probably best known internationally for its optical products,
but in the bicycle market there is interest in their helmets. Their helmets are designed and all made in Germany except
for the Urban, Hero and Viva. All of them are inmolded. They have reflective logos, nicely recessed strap anchors and
front vent net for insect protection. They have a unique buckle that uses a ridged tab that inserts and pushes in, that
we have only seen on Abus and Uvex helmets. It is adjustable with one hand while riding, particularly useful to take out
the slack as you sweat on warm rides and the strap loosens. It is one of the few designs that prompts the rider to
automatically adjust the chinstrap each time they put it on. All of their helmets have a ring fit system with a dial
adjuster. Some can be had in a sunglasses-plus-helmet combination and there are optional small LED flashers in red and
white that replace the rear strap anchor for all inmolded models. The LEDs can either blink or shine continuously. Some
models have bacteriostatic pads. Uvex helmets are distributed by Magura in the US. The line includes:
- City 3: an urban model with a very round and smooth profile, nicely recessed strap anchors and reasonable
vents. The strap adjustment pieces hold well. There is an LED blinker in the rear. Also comes in a youth version.
Retail is 70 euros.
- Urban: has the round and smooth profile we think is optimal. Unfortunately it also has the rubberized finish
that we don't think is optimal. There is a white option. Retail is $60, a lower price than most Uvex models. Selling
out in 2013 and will be dropped.
- Ultrasonic: introduced in 2012, a compact profile road model with just the suggestion of points in the rear.
Inmolded with nicely recessed strap anchors. Can replaced front and rear strap anchors with LED lights. Retail is $140.
Also comes as the Ultrasonic Race at $150 and the Ultrasonic CC in matte finish for $150. The catalog indicates
that it is only certified for the European market, but may be CPSC certified as well since Magura is promoting it in
- Xenova: a compact shape but elongated at the rear. Inmolded, bug screen in the front vents. Retail is $90
with visor. There is also a Xenova Race without visor for the same price, or the Xenova CC with visor for
- Race 5: new for 2013, an elongated model with rear points, inmolded with an inner shell also co-molded. Many
vents. Fits heads 50 to 59 cm. Retails for $190.
- Race 3: a compact model with modest rear points, inmolded with an inner shell also co-molded. Many vents.
Fits heads 50 to 59 cm. Retails for $190.
- Boss Race: an inmolded model with a dual shell covering all the foam, rear points and some shell ridges.
Retails for $120.
- Supersonic: a road model with a more rounded design that has only small bumps in the rear. Large vents.
Retails for $129. Bicycling magazine picked it as the best value of the three helmets they reported on in their
January/February 2005 issue. Inmolded, has bug net in the front vents.
- i-vo: compact shape with one small rear point. Retail is $70. Also comes as the i-vo CC with
- XP City: large vents and squared-off rear treatment with a blunt point, but skate-style coverage. Has a rear
LED light and reflective trim. Medium size only. Visor. Without the light it is the XP CC with visor for
- Viva: inmolded in a generally compact shape, but has an extended rear shelf point and a ridge all the way
around that gives an upswept surface from the front brow. Has a reflective sticker. Retails for $45, the lowest price
point in the Uvex line. Not our favorite Uvex model. Selling out in 2013 and will be dropped.
- Onyx: a youth helmet for smaller heads with a rounded profile, almost no point, visor and one bright color
choice. This is the former Superhelix. Inmolded. Small ponytail port. Fits sizes 52 to 57 cm (20.5 to 22.4 inches).
Retail is $70. This one is a US model.
- Junior: a child helmet with fairly large vents that Uvex says do not let any direct sunlight through to the
head. If that is true, there would be a market for an adult version for bald riders. Inmolded. Fits 52 to 57 cm (20.5
to 22.4 inches) heads. Retail is $55.
- Hero: a toddler helmet, inmolded. Large vents. Reflective sticker, optional rear LED light. Fits 49 to 55
cm. heads and retails for $40. Selling out in 2013.
- City 5: a skate style helmet with a small brim and rectangular vents. Uvex markets it as an urban model.
Retail is $59.
- HLMTg: a full face model with polycarbonate shell, minimal vents and a big visor. This one has been in the
Uvex line since 2005, but only got CPSC certification for the US market in 2012. Retail is $169.
- Aero: a long-tailed time trial helmet with many ribs on the surface and four adjustable long skinny vents in
the front. Inmolded, with vent adjustors added later. Meets the CPSC standard. Comes only in white/silver. Fits heads
58 to 62 cm. Retails for $190.
- Factory Pilot 2 - fp2 Time Trial: a time trail chrono model that meets only European standards. It hums when
it is off-center to alert the rider to less-than-ideal aero performance. Retails for $450. Look for it on the T-Mobile
team. Kristen Anderson won gold for the US in this helmet at the 2008 Beijing Olympics, and Uvex did not pay her a
promotional fee to wear their helmet. Meets the CEN standard, but not CPSC.
Uvex helmets fit heads up to 63 cm/24.8 inches except for the X-ride/S-Fit above. They offer a crash replacement
discount of 30% off the retail price.
Vcan is produced by Shanghai Hehui Safety Products, and includes a line of helmets that vary from beautifully
rounded and smooth to angular with very large rear points. Some are inmolded. Strap anchors are recessed or internal on
all models. All are ring fit. Most are sold under other brands. Vcan also has skate and snow helmets, but their website
emphasizes motorcycle helmets.
Ventura is a house label of the bicycle distributor Cycle Force Group. The helmets mostly retail in
the $15 to $35 range.
Vetta had a line of helmets years ago, and for 2013 they may be back, since they had three helmet models at
Interbike last year:
- Protezione: a road helmet, inmolded with unfortunate external strap anchors and a modest rear point. The
strap junction pieces slip easily. It has a visor.
- Corona: another road model, with larger points in the rear.
We don't find the helmets on their website, so we are waiting for an official announcement.
New to the US in 2013, Via Velo has various models selling in the $20 to $50 range. The only one we
see on the web is a black European road model with blocky shelf projections in the rear meeting only the CEN standard.
But at Interbike in September of 2012 Via Velo showed a number of other models, mostly road helmets with points in the
rear. They had one very interesting round profile urban helmet with large blocky vents. We don't know where to find their
Video Head is from C-Preme, the company that markets Raskullz children's helmets. They have three versions
of a skate-style helmet with an integrated video camera. It appeared in the Spring of 2013 at Wal-Mart and other stores.
We have not seen one yet. If you use a camera a lot, an integrated camera does not have a snag point that all add-on
cameras do, a distinct advantage. And the built-in control buttons may be less distracting than those on a camera. But
the Video Head's camera is below the test line for impacts to meet the CPSC standard, so you do not know from lab test
results how it will perform when hit on the camera itself. There is a USB port for data and charging the lithium battery.
There will be three camera resolutions, with MSRP ranging from $55 to $200. At Wal-Mart the price is $50 for the VGA
resolution model. REI will have the HD version at $200. The best review we have seen
is in Gizmag
. The Video Head is
an indication that a helmet with a rear-facing camera and a heads-up display to replace your old helmet mirror may be
Vigor Sports (Hong Jin Cycle Corp.) is a Korean company
with a large and varied line of helmets, some made for them by other companies. You will see them under various
Vigor-owned brands and sometimes produced for other brands as well. They have some models with EPU "double impact" foam
as well as more conventional EPS. EPU is a crushable foam that does not recover, so we don't know what "double impact"
they are referring to. If you crash in an EPU foam helmet it needs to be replaced. Vigor's models that are not inmolded
have a band of 3M reflective tape around the shell edge, a nice feature seldom seen in this price range. The black tape
is not 3M's most reflective product, but it represents some additional cost and an effort to make the helmets safer that
we wish more manufacturers would adopt. Some of their models have strap fittings that lock very well. Most are ring fit,
and all but two of the adult models have visors. Vigor is connected with THE
, (Toby Henderson
Enterprises) so they market several THE models.
- THE F-20: a well vented inmolded bicycle-style helmet with an "air deflector" adding points to the rear.
Has extended rear coverage. Strap junctions
hold well. Retail is $80.
- Fast Traxx: another road model, inmolded with nicely recessed strap anchors and a modest rear point. Ring
fit, visor. Visible white option. Retails for $45.
- NOX: an old Vigor name with a new design. There is an XXL fitting up to 65 cm. Retails for $35.
- Avenger elongated front visor molded in, with minimal protruding rear shelf. $30.
- L'il Tyke: a newly redesigned toddler helmet with a very nicely rounded profile and vents, 3M reflective
tape and ring fit. Comes only in XXS for 48 to 54 cm heads and retails for $25.
- Ten-Eighty (1080) Seraphim: A skate helmet design with the classic smooth, round exterior, round vents,
polyethylene shell and an EPS liner. It is listed as a bike, snow or skate helmet, but certified only to the CPSC
bicycle helmet standard. Has a visible white option. The strap adjustors are simple buckles that do not lock, and they
move readily, so they will not hold adjustment well. There is an XL that fits up to 64 cm heads. Retails for $25 to $32
depending on the graphics.
- 33: new for 2013, a full face model with carbon shell, small vents and minimal padding in the chinbar. Meets
only the CPSC standard, not the ASTM F1952 downhill standard. There is also a composite shell model, about four ounces
heavier and less expensive. Retail is $400 for the carbon model that weighs 110 grams less, and $275 for the one with a
- Point 5 (.5): introduced in 2011, a full-face BMX helmet for non-motorized sports with an ABS shell with
small vents and the classic large bolted-on BMX visor. CPSC certified only. The XXL fits up to 63 cm/24.8 inch heads.
Retail is $100.
- B1: very similar in profile to the F-20 above, but it is a skate model with an ABS shell and smaller vents.
The design is striking for a skate helmet. There is a visible white option. Retail is about $40.
Vigor's crash replacement policy provides a replacement of the same helmet or another current one at 30 per cent off
of retail cost for the lifetime of the helmet.
Vittoria is known in the US for its well-established line of shoes. In 2013 the company is expanding
its line with helmets. The only model we have seen was an entry level road helmet with large vents, chunky lines,
partially recessed strap anchors and a high point in the rear.
This Danish company sells a skate-style helmet with covers that convert
it into a fashion accessory that does not look like a helmet. It is well suited to places where wearing a helmet is
considered over-the-top for normal riders. The looks include a tweed hat with a brim that can flip up or down, a
military-style cap in tweed, orange or other colors and two others that conform to the helmet shape but have different
detailing and textures. There is one with Swarovsky crystals. No vents in the covers.
They are available now from a small list of dealers in the US, starting at
$65. Heritage Bicycles is shipping them in the US, charging $136 for helmet and cover. The Yakkay site lists dealers in a
number of European countries. List price in Denmark is 299 Danish Kroner ($60 US), or 90 pounds in the UK. Prices can be
much higher for some high-fashion covers. Lazer now has a similar cap-covered helmet, and others are using cap-style
visors to make their helmet look more like a cap. A great concept for those who would not be caught dead in a helmet.
Yakkay has a new accessory called Safe One that is unique for locking a helmet to a bicycle when you get to your
destination and want to leave your helmet with the bicycle. It locks the straps to the bike, and has a case that includes
a bag to cover your helmet with, keeping it clean and dry. It is well-designed for a helmet that has a fashion cover. See
also Casqu' en Ville
for similar designs.
See Kent International
YoLite Industrial Co.
YoLite supplies reflective helmets from China. They say that the entire surface of the
helmet is reflective. We have not seen them and the website does not have much info on them.
Zefal helmets appear in the US under the Michelin brand
Zero Gravity does not make bicycle helmets, but the ones
they do make are among the more interesting skateboard helmets on the market. Their ZG Vector m-5 is certified to the
ASTM F1492 skateboard standard, not to CPSC. It is a hard shell full face helmet, with a full face shield. The shell is
made of layers of fiberglass and a layer of carbon fiber, with an EPS liner.
This Chinese manufacturer (Zhuhai Hindun Safety Helmets, also Zhu Hai Safety Helmet Manufacture Co. Ltd
and Zhuhai USA Safety) has an extensive line of bicycle and BMX helmets. Most are sold by others under their brand,
including some of the best-known in the US, with others labeled with the Caluk or T-Star brand. Their numerous adult,
youth and toddler models feature both nicely-rounded and sharply-edged shells. Some are inmolded, and some have lower
shells. Their Series 08 model is on Snell's B-95 bicycle helmet standard list. Sizing runs from 49 cm (19.3 inches) for
the smallest to 64 cm (25.2 inches) for the large. Zhuhai Safety helmets are provided at low prices for helmet promotion
programs through Helmets R Us
Zhuhai Star Safety
See Star Helmets
Zike is a manufacturer of human powered vehicles and hybrid scooters. They have one helmet to complement their
product line, a skate style model that is certified only to the European standard. We don't know their retail
This page is frequently updated during the model year.
Index to Brands